RankRizz

Semiconductor Electronics — JEE Main Previous Year Questions

Every Semiconductor Electronics question JEE Main has set from 2004–2026, grouped by the idea it tests rather than the order of the syllabus. 253 questions across 6 distinct ideas. Free to read, answer key on every one.

Questions

253

Distinct ideas

6

Share of marks

4.4%

Difficulty

EASY

The ideas inside Semiconductor Electronics

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Semiconductor Electronics questions actually test.

Every Semiconductor Electronics question

101–120 OF 253 · NEWEST FIRST

JEE MAIN 2022 · 27 JUL S2Transistors (older syllabus)TRANSCRIBED

For a constant collector-emitter voltage of 8 V, the collector current of a transistor reached to the value of 6 mA from 4 mA, whereas base current changed from 20 μA20 \ \mu A to 25 μA25 \ \mu A value. If transistor is in active state, small signal current gain (current amplification factor) will be

  1. A

    240

  2. B

    400

  3. C

    0.0025

  4. D

    200

JEE MAIN 2022 · 28 JUL S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

Identify the solar cell characteristics from the following options:

  1. A
    Figure for JEE Main 2022 Physics question on Zener diode, LED, photodiode and solar cell
  2. B
    Figure for JEE Main 2022 Physics question on Zener diode, LED, photodiode and solar cell
  3. C
    Figure for JEE Main 2022 Physics question on Zener diode, LED, photodiode and solar cell
  4. D
    Figure for JEE Main 2022 Physics question on Zener diode, LED, photodiode and solar cell
JEE MAIN 2022 · 28 JUL S2Transistors (older syllabus)TRANSCRIBED

An n.p.n transistor with current gain β=100\beta = 100 in common emitter configuration is shown in figure. The output voltage of the amplifier will be

Figure for JEE Main 2022 Physics question on Transistors (older syllabus)
  1. A

    0.1 V

  2. B

    1.0 V

  3. C

    10 V

  4. D

    100 V

JEE MAIN 2022 · 27 JUN S1Logic gates and digital circuitsTRANSCRIBED

Identify the correct Logic Gate for the following output (YY) of two inputs AA and BB.

Figure for JEE Main 2022 Physics question on Logic gates and digital circuits
  1. A
    Figure for JEE Main 2022 Physics question on Logic gates and digital circuits
  2. B
    Figure for JEE Main 2022 Physics question on Logic gates and digital circuits
  3. C
    Figure for JEE Main 2022 Physics question on Logic gates and digital circuits
  4. D
    Figure for JEE Main 2022 Physics question on Logic gates and digital circuits
JEE MAIN 2022 · 25 JUL S1Logic gates and digital circuitsTRANSCRIBED

In the circuit, the logical value of A=1A = 1 or B=1B = 1 when potential at AA or BB is 5 V5 \text{ V} and the logical value of A=0A = 0 or B=0B = 0 when potential at AA or BB is 0 V0 \text{ V}.

Figure for JEE Main 2022 Physics question on Logic gates and digital circuits

The truth table of the given circuit will be:

  1. A

    ABY000100010111\begin{array}{|c|c|c|}\hline A & B & Y \\ \hline 0 & 0 & 0 \\ 1 & 0 & 0 \\ 0 & 1 & 0 \\ 1 & 1 & 1 \\ \hline \end{array}

  2. B

    ABY000101011111\begin{array}{|c|c|c|}\hline A & B & Y \\ \hline 0 & 0 & 0 \\ 1 & 0 & 1 \\ 0 & 1 & 1 \\ 1 & 1 & 1 \\ \hline \end{array}

  3. C

    ABY000100010110\begin{array}{|c|c|c|}\hline A & B & Y \\ \hline 0 & 0 & 0 \\ 1 & 0 & 0 \\ 0 & 1 & 0 \\ 1 & 1 & 0 \\ \hline \end{array}

  4. D

    ABY001101011110\begin{array}{|c|c|c|}\hline A & B & Y \\ \hline 0 & 0 & 1 \\ 1 & 0 & 1 \\ 0 & 1 & 1 \\ 1 & 1 & 0 \\ \hline \end{array}

JEE MAIN 2022 · 24 JUN S2p-n junction diode and its characteristicsTRANSCRIBED

In the given circuit, the value of current ILI_L will be ______ mA. (When RL=1R_L = 1 kΩ\Omega)

Figure for JEE Main 2022 Physics question on p-n junction diode and its characteristics
JEE MAIN 2022 · 26 JUN S1p-n junction diode and its characteristicsTRANSCRIBED

As per the given circuit, the value of current through the battery will be ______ A.Figure for JEE Main 2022 Physics question on p-n junction diode and its characteristics

JEE MAIN 2022 · 28 JUN S2Zener diode, LED, photodiode and solar cellTRANSCRIBED

A Zener of breakdown voltage VZ=8V_Z = 8 V and maximum Zener current, IZM=10I_{ZM} = 10 mA is subjected to an input voltage Vi=10V_i = 10 V with series resistance R=100R = 100 Ω\Omega. In the given circuit RLR_L represents the variable load resistance. The ratio of maximum and minimum value of RLR_L is ______.

Figure for JEE Main 2022 Physics question on Zener diode, LED, photodiode and solar cell
JEE MAIN 2022 · 25 JUL S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

The energy band gap of semiconducting material to produce violet (wavelength =4000= 4000 A˚\mathring{A}) LED is ______ eV. (Round off to the nearest integer).

JEE MAIN 2022 · 29 JUN S2p-n junction diode and its characteristicsTRANSCRIBED

A potential barrier of 0.4 V exists across a p-n junction. An electron enters the junction from the nn-side with a speed of 6.0×1056.0 \times 10^5 m s−1^{-1}. The speed with which electron enters the pp side will be x3×105\frac{x}{3} \times 10^5 m s−1^{-1}, then the value of xx is ______.: (Given mass of electron =9×10−31= 9 \times 10^{-31} kg, charge on electron =1.6×10−19= 1.6 \times 10^{-19} C.)

JEE MAIN 2022 · 29 JUL S2Zener diode, LED, photodiode and solar cellTRANSCRIBED

A 8V Zener diode along with a series resistance R is connected across a 20 V supply (as shown in the figure). If the maximum Zener current is 25 mA, then the minimum value of R will be _____ Ω\Omega.

Figure for JEE Main 2022 Physics question on Zener diode, LED, photodiode and solar cell
JEE MAIN 2022 · 24 JUN S1Transistors (older syllabus)TRANSCRIBED

A transistor is used in common-emitter mode in an amplifier circuit. When a signal of 1010 mV is added to the base-emitter voltage, the base current changes by 10μ10\muA and the collector current changes by 1.51.5 mA. The load resistance is 55 kΩ\Omega. The voltage gain of the transistor will be ______.

JEE MAIN 2022 · 25 JUN S2Transistors (older syllabus)TRANSCRIBED

In an experiment of CE configuration of n−p−nn-p-n transistor, the transfer characteristics are observed as given in figure. If the input resistance is 200Ω200\Omega and output resistance is 60Ω60\Omega, the voltage gain in this experiment will be ______.

Figure for JEE Main 2022 Physics question on Transistors (older syllabus)
JEE MAIN 2022 · 27 JUN S2p-n junction diode and its characteristicsTRANSCRIBED

The cut-off voltage of the diodes (shown in figure) in forward bias is 0.60.6 V. The current through the resister of 40Ω40\Omega is ______ mA.

Figure for JEE Main 2022 Physics question on p-n junction diode and its characteristics
JEE MAIN 2022 · 29 JUN S1Transistors (older syllabus)TRANSCRIBED

A transistor is used in an amplifier circuit in common emitter mode. If the base current changes by 100 μ\muA, it brings a change of 10 mA in collector current. If the load resistance is 2 kΩ\Omega and input resistance is 1 kΩ\Omega. The value of power gain is x×104x \times 10^4. The value of xx is ______.

JEE MAIN 2022 · 25 JUL S2p-n junction diode and its characteristicsTRANSCRIBED

Two ideal diodes are connected in the network as shown in figure. The equivalent resistance between AA and BB is ______ Ω\Omega.

Figure for JEE Main 2022 Physics question on p-n junction diode and its characteristics
JEE MAIN 2022 · 26 JUL S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

In the circuit shown below, maximum Zener diode current will be ______ mA.

Figure for JEE Main 2022 Physics question on Zener diode, LED, photodiode and solar cell
JEE MAIN 2022 · 26 JUL S2Transistors (older syllabus)TRANSCRIBED

The typical transfer characteristic of a transistor in CE configuration is shown in figure. A load resistor of 2 kΩ2 \text{ k}\Omega is connected in the collector branch of the circuit used. The input resistance of the transistor is 0.50 kΩ0.50 \text{ k}\Omega. The voltage gain of the transistor is ______.

Figure for JEE Main 2022 Physics question on Transistors (older syllabus)
JEE MAIN 2022 · 29 JUL S1p-n junction diode and its characteristicsTRANSCRIBED

If the potential barrier across a p-n junction is 0.6 V. Then the electric field intensity, in the depletion region having the width of 6×10−66 \times 10^{-6} m, will be _____ ×105\times 10^5 N C−1^{-1}

JEE MAIN 2021 · 25 FEB S2Diode circuits and rectifiersTRANSCRIBED

Match List I with List II.

List IList II
(a) Rectifier(i) Used either for stepping up or stepping down the A.C. voltage
(b) Stabilizer(ii) Used to convert A.C. voltage into D.C. voltage
(c) Transformer(iii) Used to remove any ripple in the rectified output voltage
(d) Filter(iv) Used for constant output voltage even when the input voltage or load current change


Choose the correct answer from the options given below:

  1. A

    (a)-(ii), (b)-(iv), (c)-(i), (d)-(iii)

  2. B

    (a)-(ii), (b)-(i), (c)-(iv), (d)-(iii)

  3. C

    (a)-(ii), (b)-(i), (c)-(iii), (d)-(iv)

  4. D

    (a)-(iii), (b)-(iv), (c)-(i), (d)-(ii)