RankRizz

Semiconductor Electronics — JEE Main Previous Year Questions

Every Semiconductor Electronics question JEE Main has set from 2004–2026, grouped by the idea it tests rather than the order of the syllabus. 253 questions across 6 distinct ideas. Free to read, answer key on every one.

Questions

253

Distinct ideas

6

Share of marks

4.4%

Difficulty

EASY

The ideas inside Semiconductor Electronics

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Semiconductor Electronics questions actually test.

Every Semiconductor Electronics question

201–220 OF 253 · NEWEST FIRST

JEE MAIN 2017 · 08 APR ONLINEp-n junction diode and its characteristicsTRANSCRIBED

The conductivity of a semiconductor sample having electron concentration of 5×10185 \times 10^{18} electrons m−3^{-3}, hole concentration of 5×10195 \times 10^{19} holes m−3^{-3}, electron mobility of 2.0 m2^2 V−1^{-1} s−1^{-1} and hole mobility of 0.01 m2^2 V−1^{-1} s−1^{-1} is: (Take charge of an electron as 1.6×10−191.6 \times 10^{-19} C)

  1. A

    1.83 (Ω m)−1(\Omega \text{ m})^{-1}

  2. B

    1.65 (Ω m)−1(\Omega \text{ m})^{-1}

  3. C

    1.20 (Ω m)−1(\Omega \text{ m})^{-1}

  4. D

    0.59 (Ω m)−1(\Omega \text{ m})^{-1}

JEE MAIN 2017 · 09 APR ONLINETransistors (older syllabus)TRANSCRIBED

The current gain of a common emitter amplifier is 69. If the emitter current is 7.0 mA, collector current is:

  1. A

    69 mA

  2. B

    0.69 mA

  3. C

    6.9 mA

  4. D

    9.6 mA

JEE MAIN 2016 · 03 APR OFFLINETransistors (older syllabus)TRANSCRIBED

For a common emitter configuration, if α\alpha and β\beta have their usual meanings, the correct relationship between α\alpha and β\beta is:

  1. A

    α=β1+β\alpha = \frac{\beta}{1+\beta}

  2. B

    α=β21+β2\alpha = \frac{\beta^2}{1+\beta^2}

  3. C

    1α=1β−1\frac{1}{\alpha} = \frac{1}{\beta} - 1

  4. D

    α=β1−β\alpha = \frac{\beta}{1-\beta}

JEE MAIN 2016 · 03 APR OFFLINELogic gates and digital circuitsTRANSCRIBED

If a, b, c, d are inputs to a gate and x is its output, then, as per the following time graph, the gate is:

Figure for JEE Main 2016 Physics question on Logic gates and digital circuits
  1. A

    OR

  2. B

    NAND

  3. C

    NOT

  4. D

    AND

JEE MAIN 2016 · 03 APR OFFLINEp-n junction diode and its characteristicsTRANSCRIBED

The temperature dependence of resistance of Cu and undoped Si in the temperature range 300 - 400 K is best described by:

  1. A

    linear increase for Cu, exponential decrease for Si

  2. B

    linear decrease for Cu, linear decrease for Si

  3. C

    linear increase for Cu, linear increase for Si

  4. D

    linear increase for Cu, exponential increase for Si

JEE MAIN 2016 · 09 APR ONLINETransistors (older syllabus)TRANSCRIBED

An unknown transistor needs to be identified as a npn or pnp type. A multimeter, with +ve and -ve terminals, is used to measure resistance between different terminals of transistor. If terminal 2 is the base of the transistor then which of the following is correct for a pnp transistor?

  1. A

    +ve terminal 2, -ve terminal 3, resistance low

  2. B

    +ve terminal 2, -ve terminal 1, resistance high

  3. C

    +ve terminal 1, -ve terminal 2, resistance high

  4. D

    +ve terminal 3, -ve terminal 2, resistance high

JEE MAIN 2016 · 10 APR ONLINETransistors (older syllabus)TRANSCRIBED

The ratio (R) of output resistance r0r_0, and the input resistance rir_i in measurements of input and output characteristics of a transistor is typically in the range:

  1. A

    R∼102−103R \sim 10^2 - 10^3

  2. B

    R∼1−10R \sim 1 - 10

  3. C

    R∼0.1−1.0R \sim 0.1 - 1.0

  4. D

    R∼0.1−0.01R \sim 0.1 - 0.01

JEE MAIN 2016 · 03 APR OFFLINEZener diode, LED, photodiode and solar cellTRANSCRIBED

Identify the semiconductor devices whose characteristics are given below, in the order (a), (b), (c), (d):

Figure for JEE Main 2016 Physics question on Zener diode, LED, photodiode and solar cell Figure for JEE Main 2016 Physics question on Zener diode, LED, photodiode and solar cell
  1. A

    Solar cell, Light dependent resistance, Zener diode, Simple diode

  2. B

    Zener diode, Solar cell, Simple diode, Light dependent resistance

  3. C

    Simple diode, Zener diode, Solar cell, Light dependent resistance

  4. D

    Zener diode, Simple diode, Light dependent resistance, Solar cell

JEE MAIN 2016 · 09 APR ONLINEZener diode, LED, photodiode and solar cellTRANSCRIBED

A Zener diode with a breakdown voltage of 4 V is connected in series with a resistance RR to a battery of emf 10 V. The maximum power dissipation rating for the Zener diode is 1 W. The value of RR to ensure maximum power dissipation across the diode is

  1. A

    12 Ω\Omega

  2. B

    24 Ω\Omega

  3. C

    36 Ω\Omega

  4. D

    6 Ω\Omega

JEE MAIN 2016 · 10 APR ONLINELogic gates and digital circuitsTRANSCRIBED

To get an output of 1 from the circuit shown in the figure the input must be:

Figure for JEE Main 2016 Physics question on Logic gates and digital circuits
  1. A

    a=0,b=0,c=1a = 0, b = 0, c = 1

  2. B

    a=1,b=0,c=0a = 1, b = 0, c = 0

  3. C

    a=1,b=0,c=1a = 1, b = 0, c = 1

  4. D

    a=0,b=1,c=0a = 0, b = 1, c = 0

JEE MAIN 2016 · 09 APR ONLINELogic gates and digital circuitsTRANSCRIBED

The truth table given in fig. represents:

ABY
000
011
101
111
  1. A

    OR-Gate

  2. B

    NAND-Gate

  3. C

    AND-Gate

  4. D

    NOR-Gate

JEE MAIN 2016 · 10 APR ONLINETransistors (older syllabus)TRANSCRIBED

A realistic graph depicting the variation of the reciprocal of input resistance in an input characteristics measurement in a common emitter transistor configuration is:

  1. A
    Figure for JEE Main 2016 Physics question on Transistors (older syllabus)
  2. B
    Figure for JEE Main 2016 Physics question on Transistors (older syllabus)
  3. C
    Figure for JEE Main 2016 Physics question on Transistors (older syllabus)
  4. D
    Figure for JEE Main 2016 Physics question on Transistors (older syllabus)
JEE MAIN 2015 · 10 APR ONLINEp-n junction diode and its characteristicsTRANSCRIBED

In an unbiased p - n junction electrons diffuse from n-region to p-region because:

  1. A

    electrons travel across the junction due to potential difference

  2. B

    only electrons move from n to p region and not the vice - versa

  3. C

    electron concentration in n - region is more as compared to that in p - region

  4. D

    holes in p - region attract them

JEE MAIN 2015 · 11 APR ONLINEZener diode, LED, photodiode and solar cellTRANSCRIBED

The value of the resistor, RSR_S, needed in the DC voltage regulator circuit shown here, equals:

Figure for JEE Main 2015 Physics question on Zener diode, LED, photodiode and solar cell
  1. A

    (Vi+VL)(n+1)IL\frac{(V_i+V_L)}{(n+1)I_L}

  2. B

    (Vi−VL)nIL\frac{(V_i-V_L)}{n I_L}

  3. C

    (Vi+VL)nIL\frac{(V_i+V_L)}{n I_L}

  4. D

    (Vi−VL)(n+1)IL\frac{(V_i-V_L)}{(n+1)I_L}

JEE MAIN 2014 · 06 APR OFFLINEp-n junction diode and its characteristicsTRANSCRIBED

The current voltage relation of diode is given by I=(e1000V/T−1)I = (e^{1000V/T} - 1) mA, where the applied voltage V is in volts and the temperature T is in degree Kelvin. If a student makes an error measuring ±0.01\pm 0.01 V while measuring the current of 5 mA at 300 K, what will be the error in the value of current in mA?

  1. A

    0.2 mA

  2. B

    0.02 mA

  3. C

    0.5 mA

  4. D

    0.05 mA

JEE MAIN 2014 · 09 APR ONLINETransistors (older syllabus)TRANSCRIBED

An n-p-n transistor has three leads A, B and C. Connecting B and C by moist fingers, A to the positive lead of an ammeter, and C to the negative lead of the ammeter, one finds large deflection. Then, A, B and C refer respectively to:

  1. A

    Base, emitter and collector

  2. B

    Base, collector and emitter

  3. C

    Emitter, base and collector

  4. D

    Collector, emitter and base

JEE MAIN 2014 · 12 APR ONLINEZener diode, LED, photodiode and solar cellTRANSCRIBED

For LED's to emit light in visible region of electromagnetic light, it should have energy band gap in the range of:

  1. A

    0.1eV to 0.4eV

  2. B

    0.5eV to 0.8eV

  3. C

    0.9eV to 1.6eV

  4. D

    1.7eV to 3.0eV

JEE MAIN 2014 · 19 APR ONLINELogic gates and digital circuitsTRANSCRIBED

Given, A and B are input terminals. Logic 1 is > 5 V, Logic 0 is < 1 V. Which logic gate operation, the following circuit does?

Figure for JEE Main 2014 Physics question on Logic gates and digital circuits


Note: This question was awarded a bonus. C option changed.

  1. A

    OR gate

  2. B

    NOR gate

  3. C

    Output will always be one

  4. D

    XOR gate

JEE MAIN 2014 · 06 APR OFFLINEp-n junction diode and its characteristicsTRANSCRIBED

The forward biased diode connection is:

  1. A
    Figure for JEE Main 2014 Physics question on p-n junction diode and its characteristics
  2. B
    Figure for JEE Main 2014 Physics question on p-n junction diode and its characteristics
  3. C
    Figure for JEE Main 2014 Physics question on p-n junction diode and its characteristics
  4. D
    Figure for JEE Main 2014 Physics question on p-n junction diode and its characteristics
JEE MAIN 2014 · 09 APR ONLINELogic gates and digital circuitsTRANSCRIBED

Identify the gate and match A, B, Y in the bracket to check.

Figure for JEE Main 2014 Physics question on Logic gates and digital circuits
  1. A

    OR (A = 1, B = 1, Y = 0)

  2. B

    XOR (A = 0, B = 0, Y = 0)

  3. C

    NOT (A = 1, B = 1, Y = 1)

  4. D

    AND (A = 1, B = 1, Y = 1)