RankRizz
JEE MAIN 2022 · 29 JUL S2+4 / −1EASYTRANSCRIBED

JEE Main 2022 Physics question — Zener diode, LED, photodiode and solar cell

A 8V Zener diode along with a series resistance R is connected across a 20 V supply (as shown in the figure). If the maximum Zener current is 25 mA, then the minimum value of R will be _____ Ω\Omega.

Figure for JEE Main 2022 Physics question on Zener diode, LED, photodiode and solar cell
SOLUTION

We need to find the minimum value of the series resistance RR required in the given Zener diode regulator circuit.

1. Identify the Given Circuit Parameters

  • Supply Voltage (VsV_s) = 20 V20\text{ V}
  • Zener Breakdown Voltage (VzV_z) = 8 V8\text{ V}
  • Maximum Zener Current (Iz(max)I_{z(\text{max})}) = 25 mA=25×10−3 A25\text{ mA} = 25 \times 10^{-3}\text{ A}

2. Understand the Condition for Minimum Resistance (RminR_{\text{min}})

The series resistor RR drops the excess voltage between the source supply and the stabilized Zener voltage. The current flowing through RR splits into the Zener diode (IzI_z) and the load resistor (ILI_L):

I=Iz+ILI = I_z + I_L

For the resistance RR to be at its minimum allowable value, the total current II flowing through it must be at its maximum safely sustainable limit. This worst-case scenario occurs when the load is disconnected (open-circuit condition, IL=0I_L = 0), forcing all of the circuit current to flow directly through the Zener diode (I=Iz(max)I = I_{z(\text{max})}).

3. Calculate the Voltage Drop Across Resistor RR

The voltage drop (VRV_R) across the series resistor is the difference between the input supply voltage and the constant operating voltage maintained by the Zener diode:

VR=Vs−VzV_R = V_s - V_z

VR=20 V−8 V=12 VV_R = 20\text{ V} - 8\text{ V} = 12\text{ V}

4. Calculate the Minimum Value of RR

Using Ohm's law, we substitute the voltage drop and the maximum safe current limit:

Rmin=VRIz(max)R_{\text{min}} = \frac{V_R}{I_{z(\text{max})}}

Rmin=12 V25×10−3 A=12×100025=12×40=480 ΩR_{\text{min}} = \frac{12\text{ V}}{25 \times 10^{-3}\text{ A}} = \frac{12 \times 1000}{25} = 12 \times 40 = 480\ \Omega

Therefore, the minimum value of RR required to protect the diode from exceeding its maximum current rating is 480 Ω.

Tagged Zener diode, LED, photodiode and solar cell. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicZener diode, LED, photodiode and solar cell
TypeNumerical answer