RankRizz

Zener diode, LED, photodiode and solar cell — JEE Main Previous Year Questions

Every JEE Main question on Zener diode, LED, photodiode and solar cell, one of the ideas inside Semiconductor Electronics: 50 questions from 2013–2026, 26 of them in the last five years. Newest first, answer key on every one. Free to read.

Questions

50

Years asked

13

Since

2013

Of the chapter

20%

When JEE Main asked it

Questions on Zener diode, LED, photodiode and solar cell in each year it was asked, the latest 12 of 13.

20264
20253
20247
20236
20226
20217
20205
20195
20181
20162
20151
20142

Every Zener diode, LED, photodiode and solar cell question

1–20 OF 50 · NEWEST FIRST

JEE MAIN 2026 · 23 JAN S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

The following diagram shows a Zener diode as a voltage regulator. The Zener diode is rated at Vz=5VV_{z}=5V and the desired current in load is 5 mA. The unregulated voltage source can supply upto 25 V. Considering the Zener diode can withstand four times of the load current, the value of resistor RsR_{s} (shown in circuit) should be ____ Ω .

Figure for JEE Main 2026 Physics question on Zener diode, LED, photodiode and solar cell
  1. A

    10

  2. B

    4000

  3. C

    100

  4. D

    1000

JEE MAIN 2026 · 06 APR S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through resistance RSR_S is 0.5 mA.
The minimum value of the resistance of RSR_S, to ensure that the LED is not damaged is _______ kΩ\Omega.

Figure for JEE Main 2026 Physics question on Zener diode, LED, photodiode and solar cell
  1. A

    6

  2. B

    2

  3. C

    4

  4. D

    5

JEE MAIN 2026 · 04 APR S2Zener diode, LED, photodiode and solar cellTRANSCRIBED

A diode has Zener voltage of 10 V and maximum power dissipation of 0.5 W, then the minimum resistance to be used in series with this diode for safety when it is connected to a 25 V power supply is ______ Ω\Omega.

JEE MAIN 2026 · 24 JAN S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

A voltage regulating circuit consisting of Zener diode, having break-down voltage of 10 V and maximum power dissipation of 0.4 W, is operated at 15 V. The approximate value of protective resistance in this circuit is ___ Ω.

JEE MAIN 2025 · 24 JAN S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

Consider the following statements: A. The junction area of solar cell is made very narrow compared to a photo diode. B. Solar cells are not connected with any external bias. C. LED is made of lightly doped p-n junction. D. Increase of forward current results in continuous increase of LED light intensity. E. LEDs have to be connected in forward bias for emission of light. Choose the correct answer from the options given below:

  1. A

    B, E Only

  2. B

    B, D, E Only

  3. C

    A, C Only

  4. D

    A, C, E Only

JEE MAIN 2025 · 02 APR S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

A zener diode with 5V zener voltage is used to regulate an unregulated dc voltage input of 25 V. For a 400 Ω\Omega resistor connected in series, the zener current is found to be 4 times load current. The load current (ILI_L) and load resistance (RLR_L) are:

  1. A

    ILI_L = 20 mA; RLR_L = 250 Ω\Omega

  2. B

    ILI_L = 10 A; RLR_L = 0.5 Ω\Omega

  3. C

    ILI_L = 0.02 mA; RLR_L = 250 Ω\Omega

  4. D

    ILI_L = 10 mA; RLR_L = 500 Ω\Omega

JEE MAIN 2025 · 07 APR S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

In the following circuit, the reading of the ammeter will be (Take Zener breakdown voltage = 4 V)

Figure for JEE Main 2025 Physics question on Zener diode, LED, photodiode and solar cell
  1. A

    24 mA

  2. B

    80 mA

  3. C

    10 mA

  4. D

    60 mA

JEE MAIN 2024 · 01 FEB S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

In the given circuit if the power rating of Zener diode is 1010 mW, the value of series resistance RsR_s to regulate the input unregulated supply is: 

Figure for JEE Main 2024 Physics question on Zener diode, LED, photodiode and solar cell
  1. A

    37\frac{3}{7} kΩ\Omega

  2. B

    10 Ω10\ \Omega

  3. C

    11 kΩ\Omega

  4. D

    1010 kΩ\Omega

JEE MAIN 2024 · 09 APR S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

A light emitting diode (LED) is fabricated using GaAs semiconducting material whose band gap is 1.421.42 eV. The wavelength of light emitted from the LED is :

  1. A

    14001400 nm

  2. B

    650650 nm

  3. C

    875875 nm

  4. D

    12431243 nm

JEE MAIN 2024 · 09 APR S2Zener diode, LED, photodiode and solar cellTRANSCRIBED

The I−VI - V characteristics of an electronic device shown in the figure. The device is:

Figure for JEE Main 2024 Physics question on Zener diode, LED, photodiode and solar cell
  1. A

    a diode which can be used as a rectifier

  2. B

    a zener diode which can be used as a voltage regulator

  3. C

    a transistor which can be used as an amplifier

  4. D

    a solar cell

JEE MAIN 2024 · 01 FEB S2Zener diode, LED, photodiode and solar cellTRANSCRIBED

Conductivity of a photodiode starts changing only if the wavelength of incident light is less than 660 nm. The band gap of photodiode is found to be X8\frac{X}{8} eV. The value of X is: (Given h=6.6×10−34h = 6.6 \times 10^{-34} J s, e=1.6×10−19e = 1.6 \times 10^{-19} C)

  1. A

    15

  2. B

    11

  3. C

    13

  4. D

    21

JEE MAIN 2024 · 29 JAN S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

In the given circuit, the breakdown voltage of the Zener diode is 3.03.0 V. What is the value of IzI_z?

Figure for JEE Main 2024 Physics question on Zener diode, LED, photodiode and solar cell
  1. A

    3.33.3 mA

  2. B

    5.55.5 mA

  3. C

    1010 mA

  4. D

    77 mA

JEE MAIN 2024 · 30 JAN S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

A Zener diode of breakdown voltage 10 V10 \text{ V} is used as a voltage regulator as shown in the figure. The current through the Zener diode is

Figure for JEE Main 2024 Physics question on Zener diode, LED, photodiode and solar cell
  1. A

    50 mA50 \text{ mA}

  2. B

    00

  3. C

    30 mA30 \text{ mA}

  4. D

    20 mA20 \text{ mA}

JEE MAIN 2024 · 08 APR S2Zener diode, LED, photodiode and solar cellTRANSCRIBED

A potential divider circuit is connected with a dc source of 20 V, a light emitting diode of glow in voltage 1.8 V and a zener diode of breakdown voltage of 3.2 V. The length (PR) of the resistive wire is 20 cm. The minimum length of PQ to just glow the LED is _____ cm

page5_img1
JEE MAIN 2023 · 29 JAN S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

Which of the following statement is not correct in the case of light emitting diodes?
A. It is a heavily doped p-n junction.
B. It emits light only when it is forward biased.
C. It emits light only when it is reverse biased.
D. The energy of the light emitted is equal to or slightly less than the energy gap of the semiconductor used.
Choose the correct answer from the options given below:

  1. A

    C and D

  2. B

    A

  3. C

    C

  4. D

    B

JEE MAIN 2023 · 24 JAN S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R.
Assertion A: Photodiodes are preferably operated in reverse bias condition for light intensity measurement.
Reason R: The current in the forward bias is more than the current in the reverse bias for a p−np - n junction diode.
In the light of the above statement, choose the correct answer from the options given below :

  1. A

    A is false but R is true

  2. B

    Both A and R are true but R is NOT the correct explanation of A

  3. C

    A is true but R is false

  4. D

    Both A and R are true and R is the correct explanation of A

JEE MAIN 2023 · 24 JAN S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R.
Assertion A: Photodiodes are preferably operated in reverse bias condition for light intensity measurement.
Reason R: The current in the forward bias is more than the current in the reverse bias for a pp-nn junction diode.
In the light of the above statement, choose the correct answer from the options given below:

  1. A

    A is false but R is true

  2. B

    Both A and R are true but R is NOT the correct explanation of A

  3. C

    A is true but R is false

  4. D

    Both A and R are true and R is the correct explanation of A

JEE MAIN 2023 · 01 FEB S2Zener diode, LED, photodiode and solar cellTRANSCRIBED

Choose the correct statement about Zener diode:

  1. A

    It works as a voltage regulator in reverse bias and behaves like simple p-n junction diode in forward bias

  2. B

    It works as a voltage regulator in both forward and reverse bias

  3. C

    It works a voltage regulator only in forward bias

  4. D

    It works as a voltage regulator in forward bias and behaves like simple p-n junction diode in reverse bias

JEE MAIN 2023 · 25 JAN S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R
Assertion A: Photodiodes are used in forward bias usually for measuring the light intensity.
Reason R: For a p−np-n junction diode, at applied voltage VV the current in the forward bias is more than the current in the reverse bias for ∣Vz∣>±V≥∣V0∣|V_z| > \pm V \geq |V_0| where V0V_0 is the threshold voltage and VzV_z is the breakdown voltage.
In the light of the above statements, choose the correct answer from the options given below

  1. A

    Both A and R are true and R is correct explanation A

  2. B

    Both A and R are true but R is NOT the correct explanation A

  3. C

    A is false but R is true

  4. D

    A is true but R is false

JEE MAIN 2023 · 10 APR S1Zener diode, LED, photodiode and solar cellTRANSCRIBED

A zener diode of power rating 1.6 W is to be used as voltage regulator. If the zener diode has a breakdown of 8 V and it has to regulate voltage fluctuating between 3 V and 10 V. The value of resistance RsR_s for safe operation of diode will be

Figure for JEE Main 2023 Physics question on Zener diode, LED, photodiode and solar cell
  1. A

    10 Ω\Omega

  2. B

    12 Ω\Omega

  3. C

    13.3 Ω\Omega

  4. D

    13 Ω\Omega