RankRizz

Units, Dimensions & Errors — JEE Main Previous Year Questions

Every Units, Dimensions & Errors question JEE Main has set from 2004–2026, grouped by the idea it tests rather than the order of the syllabus. 223 questions across 4 distinct ideas. Free to read, answer key on every one.

Questions

223

Distinct ideas

4

Share of marks

5.4%

Difficulty

EASY

The ideas inside Units, Dimensions & Errors

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Units, Dimensions & Errors questions actually test.

Units, Dimensions & Errors weightage, year by year

The share of each year’s Physics questions that came from Units, Dimensions & Errors, counted from the 168 papers we hold for the last 10 years, and session by session inside a year.

Rising: 5.3% of Physics questions in 2024–2026, up from 3.5% in 2017–2023. Its heaviest year was 2025, at 6.1%.

202626 / 4755.5%JAN 5.2%APR 5.8%
202529 / 4756.1%JAN 6.4%APR 5.8%
202427 / 6004.5%JAN 4.3%APR 4.7%
202325 / 7503.3%JAN 3.3%APR 3.3%
202224 / 6603.6%JUN 3.6%JUL 3.7%
202128 / 7203.9%FEB 3.3%MAR 2.7%JUL 2.9%AUG 6.2%
202014 / 4003.5%JAN 3.3%SEP 3.6%
201913 / 4802.7%JAN 2.5%APR 2.9%
20185 / 1204.2%4 PAPERS, ONE SESSION
20173 / 903.3%3 PAPERS, ONE SESSION

“QS” is Units, Dimensions & Errors questions out of all Physics questions that year. A year with more sittings asks more questions, which is why the share, not the count, is the number to compare.

Units, Dimensions & Errors: quick answers

How many Units, Dimensions & Errors questions has JEE Main asked?

223 questions from 2004–2026. Over the last 20 papers, Units, Dimensions & Errors carried about 5.4% of Physics marks.

Which Units, Dimensions & Errors topics come up most?

Dimensional analysis: deriving and checking relations (108 questions), Errors in measurement and significant figures (75 questions), Units: SI system, unit conversion and new systems of units (20 questions). Start with these, they are what the examiner keeps coming back to.

Is Units, Dimensions & Errors important for JEE Main?

Rising: 5.3% of Physics questions in 2024–2026, up from 3.5% in 2017–2023. Its heaviest year was 2025, at 6.1%. It has carried about 5.4% of Physics marks in recent papers, rated easy on our difficulty scale. The year-by-year table above shows how that has moved.

Do these Units, Dimensions & Errors PYQs have answers and solutions?

Yes. Every question shows its official answer key, and a worked solution opens on the question’s own page wherever we have one. Reading and checking answers is free, no sign-up needed.

What’s the fastest way to revise Units, Dimensions & Errors?

Do one past question per idea first: Units, Dimensions & Errors has 4 distinct ideas, listed above. Then practise the topics you get wrong, or build a timed test from this chapter.

Every Units, Dimensions & Errors question

1–20 OF 223 · NEWEST FIRST

JEE MAIN 2026Dimensional analysis: deriving and checking relationsTRANSCRIBED

A physical quantity XX depends on the velocity of light (cc), Planck's constant (hh), and Newton's gravitational constant (GG) such that the dimensional formula of XX is identical to that of surface tension. If the relation is expressed as X=cahbGcX = c^a h^b G^c, then find the absolute integer value of (a+2b+3c)(a + 2b + 3c).

JEE MAIN 2026 · 02 APR S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

The dimensional formula of 12ϵ0E2\frac{1}{2} \epsilon_0 E^2 (ϵ0\epsilon_0 = permittivity of vacuum and E = electric field) is MaLbTcM^a L^b T^c. The value of 2a−b+c2a - b + c = __________.

  1. A

    00

  2. B

    11

  3. C

    −1-1

  4. D

    22

JEE MAIN 2026 · 04 APR S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

Match the List-I with List II

Figure for JEE Main 2026 Physics question on Dimensional analysis: deriving and checking relations

Choose the correct answer from the options given below:  

  1. A

    A-III, B-IV, C-I, D-II

  2. B

    A-I, B-II, C-III, D-IV

  3. C

    A-IV, B-III, C-I, D-II

  4. D

    A-I, B-IV, C-III, D-II

JEE MAIN 2026 · 05 APR S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

Match the List I With List II:

Figure for JEE Main 2026 Physics question on Dimensional analysis: deriving and checking relations

Where (Plank's constant), G(gravitational constant) and c (speed of light in vacuum) as fundamental units.
Choose the  correct answer from the options given below:

  1. A

    A-II, B-IV, C-I, D-III

  2. B

    A-IV, B-II, C-I, D-III

  3. C

    A-IV, B-I, C-II, D-III

  4. D

    A-III, B-I, C-II, D-IV

JEE MAIN 2026 · 06 APR S2Errors in measurement and significant figuresTRANSCRIBED

The percentage error in the calculated volume of a sphere, if there is 2% error in its diameter measurement, is __________.

  1. A

    1

  2. B

    2

  3. C

    6

  4. D

    8

JEE MAIN 2026 · 06 APR S1Errors in measurement and significant figuresTRANSCRIBED

The density ρ\rho of a uniform cylinder is determined by measuring its mass mm, length ll and diameter dd. The measured values of mm, ll and dd are 97.42 ±\pm 0.02 g, 8.35 ±\pm 0.05 mm and 20.20 ±\pm 0.02 mm, respectively. Calculated percentage fractional error in ρ\rho is _______.

  1. A

    0.63%

  2. B

    0.82%

  3. C

    0.72%

  4. D

    0.25%

JEE MAIN 2026 · 08 APR S2Units: SI system, unit conversion and new systems of unitsTRANSCRIBED

A new unit (α\alpha) of length is chosen such that it is equal to the speed of light in vacuum. What is the distance between Venus and Earth in terms of α\alpha units if light takes 6 min. 40 s to cover this distance?

  1. A

    200α200\alpha

  2. B

    400α400\alpha

  3. C

    300α300\alpha

  4. D

    500α500\alpha

JEE MAIN 2026 · 02 APR S1Errors in measurement and significant figuresTRANSCRIBED

The diameter of a wire measured by a screw gauge of least count 0.001 cm is 0.08 cm. The length measured by a scale of least count 0.1 cm is 150 cm. When a weight of 100 N is applied to the wire, the extension in length is 0.5 cm, measured by a micrometer of least count 0.001 cm. The error in the measured Young's modulus is α×109\alpha \times 10^9 N/m2^2. The value of α\alpha is __________ . (Ignore the contribution of the load to Young's modulus error calculation)

  1. A

    1.31.3

  2. B

    1.651.65

  3. C

    0.130.13

  4. D

    0.250.25

JEE MAIN 2026 · 05 APR S2Errors in measurement and significant figuresTRANSCRIBED

In an experiment to determine the resistance of a given wire using Ohm’s law, the voltmeter and ammeter readings are noted as 10V10 V and 5A5 A, respectively. The least counts of voltmeter and ammeter are 500mV500 mV and 200mA200 mA, respectively. The estimated error in the resistance measurement  is_______Ω.

  1. A

    0.250.25

  2. B

    22

  3. C

    2.52.5

  4. D

    0.180.18

JEE MAIN 2026 · 06 APR S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

Match List - I with List - II. 

Figure for JEE Main 2026 Physics question on Dimensional analysis: deriving and checking relations


Choose the correct answer from the options given below :

  1. A

    A-I, B-II, C-III, D-IV

  2. B

    A-IV, B-III, C-II, D-I

  3. C

    A-III, B-IV, C-II, D-I

  4. D

    A-II, B-I, C-IV, D-III

JEE MAIN 2026 · 06 APR S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

The potential energy of a particle changes with distance xx from a fixed origin as V=Axx+BV = \frac{A\sqrt{x}}{x + B}, where AA and BB are constants with appropriate dimensions. The dimensions of ABAB are _______.

  1. A

    [M1L5/2T−2][M^1 L^{5/2} T^{-2}]

  2. B

    [M3/2L5/2T−2][M^{3/2} L^{5/2} T^{-2}]

  3. C

    [M1L2T−2][M^1 L^2 T^{-2}]

  4. D

    [M1L7/2T−2][M^1 L^{7/2} T^{-2}]

JEE MAIN 2026 · 08 APR S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

Consider the equation H=xpϵqErtsH = \frac{x^p \epsilon^q E^r}{t^s}
Where HH = magnetic field Intensity ; EE = electric field, ϵ\epsilon = permittivity, xx = distance, tt = time. The values of p,q,rp, q, r and ss respectively are :

  1. A

    1, 1, 1, 1

  2. B

    −1,1,2,1-1, 1, 2, 1

  3. C

    1,−1,−2,11, -1, -2, 1

  4. D

    −1,−2,−2,1-1, -2, -2, 1

JEE MAIN 2026 · 05 APR S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

LL, CC and RR represents physical quantities inductance, capacitance and resistance respectively. The dimensional formula ML2T−4A−2M L^2 T^{-4} A^{-2} corresponds to _______.

  1. A

    RLC\frac{R}{\sqrt{LC}}

  2. B

    RLC\frac{R}{LC}

  3. C

    CLR\frac{C}{\sqrt{LR}}

  4. D

    1RLC\frac{1}{R}\sqrt{\frac{L}{C}}

JEE MAIN 2026 · 21 JAN S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

Consider a modified Bernoulli equation.
(P+ABt2)+ρg(h+Bt)+12 ρV2=constant\left( P + \frac{A}{B t^2} \right) + \rho g (h + B t) + \frac{1}{2}\,\rho V^2 = \text{constant}
If t has tile dimension of time then the dimensions of A and B are ___.___ respectively.

  1. A

    [ML0T−1] and [M0LT][ML^{0}T^{-1}]\text{ and }[M^{0}LT]

  2. B

    [ML0T−2] and [M0LT−2][ML^{0}T^{-2}]\text{ and }[M^{0}LT^{-2}]

  3. C

    [ML0T−2] and [M0LT−1][ML^{0}T^{-2}]\text{ and }[M^{0}LT^{-1}]

  4. D

    [ML0T−1] and [M0LT−1][ML^{0}T^{-1}]\text{ and }[M^{0}LT^{-1}]

JEE MAIN 2026 · 23 JAN S2Errors in measurement and significant figuresTRANSCRIBED

To compare EMF of two cells using potentiometer the balancing lengths obtained are 200 cm and 150 cm. The least count of scale is 1 cm. The percentage error in the ratio of EMFs is______

  1. A

    1.55

  2. B

    1.75

  3. C

    1.65

  4. D

    1.17

JEE MAIN 2026 · 02 APR S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

Dimensions of universal gravitational constant (G)(G) in terms of Planck's constant (h)(h), distance (L)(L), mass (M)(M) and time (T)(T) are :

  1. A

    [hTLM−2][hTLM^{-2}]

  2. B

    [hT−1LM−2][hT^{-1}LM^{-2}]

  3. C

    [hTL2M−2][hTL^2M^{-2}]

  4. D

    [h−1T−1LM−2][h^{-1}T^{-1}LM^{-2}]

JEE MAIN 2026 · 22 JAN S2Units: SI system, unit conversion and new systems of unitsTRANSCRIBED

If ϵ\epsilon, E and t represent the free space permittivity, electric field and time respectively, then the unit of ϵEt\frac{\epsilon E}{t} will be :

  1. A

    Am2Am^{2}

  2. B

    A/m2A/m^{2}

  3. C

    A/mA/m

  4. D

    Am

JEE MAIN 2026 · 21 JAN S2Errors in measurement and significant figuresTRANSCRIBED

Keeping tl1e significant figures in view, the sum of the physical quantities 52.01 m, 153.2 m and 0.123 m is:

  1. A

    205m

  2. B

    205.333m

  3. C

    205.33 m

  4. D

    205.3m

JEE MAIN 2026 · 28 JAN S2Errors in measurement and significant figuresTRANSCRIBED

The speed of a longitudinal wave in a metallic bar is 400 m/s. If the density and Young's modulus of the bar material are increased by 0.5% and 1 %, respectively then the speed of the wave is changed approximately to m/ s.

  1. A

    402

  2. B

    399

  3. C

    401

  4. D

    398

JEE MAIN 2026 · 22 JAN S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

Match the LIST-I with LIST-II

Screenshot_39

Choose the correct answer from the options given befow:

  1. A

    A-II, B-I, C-IV, D-III

  2. B

    A-II, B-IV, C-I, D-III

  3. C

    A-III, B-II, C-IV, D-I

  4. D

    A-I, B-IV, C-II, D-III