A realistic graph depicting the variation of the reciprocal of input resistance in an input characteristics measurement in a common emitter transistor configuration is:
In a CE configuration, the input junction is the base-emitter junction, which behaves essentially like a forward-biased diode. The input characteristic is a plot of base current () versus base-emitter voltage () for a constant collector-emitter voltage ().
The dynamic input resistance () is defined as the change in input voltage divided by the resulting change in input current:
Below Cut-in Voltage (): The base-emitter junction is not yet conducting significantly. The current is nearly zero, and the curve is flat. Therefore, the slope is zero.
Near Cut-in Voltage (): The current begins to rise. The slope starts to increase from zero.
Above Cut-in Voltage (): The current increases exponentially at first. However, in a realistic transistor, internal series resistances eventually limit the current's rate of increase. This causes the slope of the vs curve to level off and approach a steady value at higher voltages.
All these are correctly shown in the figure in option (B)
Tagged Transistors (older syllabus). Machine-assigned, so read it as a strong shortlist rather than a verdict.