Two thin wires, Wire-1 of diameter and Wire-2 of unknown diameter are given. To obtain the value of , the diameters of the two wires are measured with a screw gauge. The screw gauge has a pitch of and there are divisions on the circular scale (CS). The smallest division on the linear scale (LS) is . The table shows the readings of LS and CS for the measurements. The value of (in ) is:
| Readings | ||
| LS (mm) | CS | |
| Wire-1 | 0.5 | 42 |
| Wire-2 | 1.5 | 95 |