RankRizz

Alternating Current — JEE Advanced Previous Year Questions

Every Alternating Current question JEE Advanced has set from 2007–2025, grouped by the idea it tests rather than the order of the syllabus. 13 questions across 4 distinct ideas. Free to read, answer key on every one.

Questions

13

Distinct ideas

4

Share of marks

1.4%

Difficulty

MEDIUM

The ideas inside Alternating Current

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Alternating Current questions actually test.

01AC basics: rms and average values, phasorsset 9×
02AC through resistor, inductor and capacitorNot set in Advanced
03Series LCR circuits: impedance and phaseset 2×
04Resonance, bandwidth and quality factorNot set in Advanced
05Power in AC circuits and power factorNot set in Advanced
06LC oscillationsset 1×
07AC generator and transformerset 1×

Alternating Current weightage, year by year

The share of each year’s Physics questions that came from Alternating Current, counted from the 19 papers we hold for the last 10 years, and paper by paper inside a year.

Rising: 2.0% of Physics questions in 2024–2026, up from 1.3% in 2017–2023. Its heaviest year was 2017, at 5.6%. Not asked at all in 2018, 2019, 2020, 2021, 2022, 2026.

20260 / 340.0%PAPER 1 0.0%PAPER 2 0.0%
20251 / 323.1%PAPER 1 6.3%PAPER 2 0.0%
20241 / 342.9%PAPER 1 5.9%PAPER 2 0.0%
20231 / 342.9%PAPER 1 5.9%PAPER 2 0.0%
20220 / 360.0%PAPER 1 0.0%PAPER 2 0.0%
20210 / 380.0%PAPER 1 0.0%PAPER 2 0.0%
20200 / 360.0%PAPER 1 0.0%PAPER 2 0.0%
20190 / 360.0%PAPER 1 0.0%PAPER 2 0.0%
20180 / 180.0%1 PAPER
20172 / 365.6%PAPER 1 5.6%PAPER 2 5.6%

“QS” is Alternating Current questions out of all Physics questions that year. A year with more sittings asks more questions, which is why the share, not the count, is the number to compare.

Alternating Current: quick answers

How many Alternating Current questions has JEE Advanced asked?

13 questions from 2007–2025. Over the last 20 papers, Alternating Current carried about 1.4% of Physics marks.

Which Alternating Current topics come up most?

AC basics: rms and average values, phasors (9 questions), Series LCR circuits: impedance and phase (2 questions), LC oscillations (1 questions). Start with these, they are what the examiner keeps coming back to.

Is Alternating Current important for JEE Advanced?

Rising: 2.0% of Physics questions in 2024–2026, up from 1.3% in 2017–2023. Its heaviest year was 2017, at 5.6%. Not asked at all in 2018, 2019, 2020, 2021, 2022, 2026. It has carried about 1.4% of Physics marks in recent papers, rated medium on our difficulty scale. The year-by-year table above shows how that has moved.

Do these Alternating Current PYQs have answers and solutions?

Yes. Every question shows its official answer key, and a worked solution opens on the question’s own page wherever we have one. Reading and checking answers is free, no sign-up needed.

What’s the fastest way to revise Alternating Current?

Do one past question per idea first: Alternating Current has 4 distinct ideas, listed above. Then practise the topics you get wrong, or build a timed test from this chapter.

Every Alternating Current question

1–13 OF 13 · NEWEST FIRST

JEE ADVANCED 2025 · PAPER 1Series LCR circuits: impedance and phaseTRANSCRIBED

A circuit with an electrical load having impedance ZZ is connected with an AC source as shown in the diagram. The source voltage varies in time as V(t)=300sin⁡(400t)V(t) = 300 \sin(400t) V, where tt is time in s. List-I shows various options for the load. The possible currents i(t)i(t) in the circuit as a function of time are given in List-II.

Figure for JEE Advanced 2025 Physics question on Series LCR circuits: impedance and phase

Choose the option that describes the correct match between the entries in List-I to those in List-II.

Figure for JEE Advanced 2025 Physics question on Series LCR circuits: impedance and phase
  1. A

    P→\to3, Q→\to5, R→\to2, S→\to1

  2. B

    P→\to1, Q→\to5, R→\to2, S→\to3

  3. C

    P→\to3, Q→\to4, R→\to2, S→\to1

  4. D

    P→\to1, Q→\to4, R→\to2, S→\to5

JEE ADVANCED 2024 · PAPER 1LC oscillationsTRANSCRIBED

The circuit shown in the figure contains an inductor LL, a capacitor C0C_0, a resistor R0R_0 and an ideal battery. The circuit also contains two keys K1K_1 and K2K_2. Initially, both the keys are open and there is no charge on the capacitor. At an instant, key K1K_1 is closed and immediately after this the current in R0R_0 is found to be I1I_1. After a long time, the current attains a steady state value I2I_2. Thereafter, K2K_2 is closed and simultaneously K1K_1 is opened and the voltage across C0C_0 oscillates with amplitude V0V_0 and angular frequency ω0\omega_0.

Figure for JEE Advanced 2024 Physics question on LC oscillations

Match the quantities mentioned in List-I with their values in List-II and choose the correct option.

List-IList-II
(P)The value of I1I_1 in Ampere is(1)00
(Q)The value of I2I_2 in Ampere is(2)22
(R)The value of ω0\omega_0 in kilo-radians/s is(3)44
(S)The value of V0V_0 in Volt is(4)2020
(5)200200
  1. A

    P →\to 1; Q →\to 3; R →\to 2; S →\to 5

  2. B

    P →\to 1; Q →\to 2; R →\to 3; S →\to 5

  3. C

    P →\to 1; Q →\to 3; R →\to 2; S →\to 4

  4. D

    P →\to 2; Q →\to 5; R →\to 3; S →\to 4

JEE ADVANCED 2023 · PAPER 1Series LCR circuits: impedance and phaseTRANSCRIBED

A series LCR circuit is connected to a 45 sin(ωt\omega t) Volt source. The resonant angular frequency of the circuit is 10510^5 rad s−1^{-1} and current amplitude at resonance is I0I_0. When the angular frequency of the source is ω=8×104\omega = 8 \times 10^4 rad s−1^{-1}, the current amplitude in the circuit is 0.05 I0I_0. If L=50L = 50 mH, match each entry in List-I with an appropriate value from List-II and choose the correct option.

List-IList-II
(P)I0I_0 in mA(1)44.4
(Q)The quality factor of the circuit(2)18
(R)The bandwidth of the circuit in rad s−1^{-1}(3)400
(S)The peak power dissipated at resonance in Watt(4)2250
(5)500
  1. A

    P →\to 2, Q →\to 3, R →\to 5, S →\to 1

  2. B

    P →\to 3, Q →\to 1, R →\to 4, S →\to 2

  3. C

    P →\to 4, Q →\to 5, R →\to 3, S →\to 1

  4. D

    P →\to 4, Q →\to 2, R →\to 1, S →\to 5

JEE ADVANCED 2017 · PAPER 1AC basics: rms and average values, phasorsTRANSCRIBED

In the circuit shown, L=1μH,C=1μFL = 1 \mu H, C = 1 \mu F and R=1kΩ.R = 1 kΩ. They are connected in series with an a.c. source V=V0sin⁡ωtV = V_0 \sin \omega t as shown. Which of the following options is/are correct?

Figure for JEE Advanced 2017 Physics question on AC basics: rms and average values, phasors
  1. A

    The current will be in phase with the voltage if ω=104rad.s−1\omega = 10^4 rad. s^{-1}

  2. B

    The frequency at which the current will be in phase with the voltage is independent of 𝑅

  3. C

    At ω∼0\omega \sim 0 the current flowing through the circuit becomes nearly zero

  4. D

    At ω≫106rad.s−1\omega \gg 10^6 rad. s^{-1}, the circuit behaves like a capacitor

JEE ADVANCED 2017 · PAPER 2AC basics: rms and average values, phasorsTRANSCRIBED

The instantaneous voltages at three terminals marked X,Y and Z are given by VX=V0sin⁡ωtV_{X}= V_{0} \sin \omega t, VY=V0sin⁡(ωt+2π3)V_{Y}= V_{0} \sin (\omega t+\frac{2\pi}{3})
and VZ=V0sin⁡(ωt+4π3)V_{Z}= V_{0} \sin (\omega t+\frac{4\pi}{3}). An ideal voltmeter is configured to read rms value of the potential difference between its terminals. It is connected between points X and Y and then between Y and Z The reading(s) of the voltmeter will be

  1. A

    VXYrms=V032V^{rms}_{XY}= V_{0} \sqrt{\frac{3}{2}}

  2. B

    VYZrms=V012V^{rms}_{YZ}= V_{0} \sqrt{\frac{1}{2}}

  3. C

    VXYrms=V0V^{rms}_{XY}= V_{0}

  4. D

    independent of the choice of the two terminals

JEE ADVANCED 2014 · PAPER 1AC basics: rms and average values, phasorsTRANSCRIBED

At time t = 0, terminal A in the circuit shown in the figure is connected to B by a keyand an alternating current I(t)=I0cos⁡fo(ωt)I(t) = I_0 \cos^fo (\omega t), with I0=1AI_0 = 1 A and ω=500rads−1\omega = 500 rad s^{-1} starts flowing in it with the intial direction shown in the figure. At t=7π6ωt = \frac{7 \pi}{6 \omega}, the key is switched from B to D. Now onwards only A and D are connected. A total charge Q flows from the battery to charge the capacitor fully. If C=20μF,R=10ΩC = 20 \mu F, R = 10 Ω and the battery is ideal with emf of 50V, identify the correct statement (s).

Figure for JEE Advanced 2014 Physics question on AC basics: rms and average values, phasors
  1. A

    Magnitude of the maximum charge on the capacitor before t=7π6ωt = \frac{7 \pi}{6 \omega} is 1×10−3C.1 \times 10^{-3} C.

  2. B

    The current in the left part of the circuit just before t=7π6ωt = \frac{7 \pi}{6 \omega} is clockwise.

  3. C

    Immediately after A is connected to D, the current in R is 10A

  4. D

    Q=2×10−3C.Q = 2 \times 10^{-3} C.

JEE ADVANCED 2013 · PAPER 2AC generator and transformerTRANSCRIBED

In the method using the transformers, assume that the ratio of the numberof turns in the primary to that in the secondary in the step-up transformeris 1 : 10. If the power to the consumers has to be supplied at 200 V, the ratio of the numberof turns in the primary to that in the secondary in the step-down transformer is

  1. A

    200 : 1

  2. B

    150 : 1

  3. C

    100 : 1

  4. D

    50 : 1

JEE ADVANCED 2012 · PAPER 2AC basics: rms and average values, phasorsTRANSCRIBED

In the given circuit, the AC source has ω=100\omega = 100 rad/s. considering the inductor and capacitor to be ideal, the correct choice (s) is(are)

Figure for JEE Advanced 2012 Physics question on AC basics: rms and average values, phasors
  1. A

    The current through the circuit, I is 0.3 A

  2. B

    The current through the circuit, I is 0.32A0.3 \sqrt{2} A.

  3. C

    The voltage across 100 Ω resistor =102= 10 \sqrt{2} V

  4. D

    The voltage across 50 Ω resistor = 10 V

JEE ADVANCED 2011 · PAPER 2AC basics: rms and average values, phasorsTRANSCRIBED

A series R-C circuit is connected to AC voltage source. Consider two cases; (A) when C is without a dielectric medium and (B) when C is filled with dielectric of constant 4. The
current IRI_R through the resistor and voltage VCV_C across the capacitor are comparedin the two cases. Whichof the following is/are true?

  1. A

    IRA>IRBI_{R}^{A} > I_{R}^{B}

  2. B

    IRA<IRBI_{R}^{A} < I_{R}^{B}

  3. C

    VCA>VCBV_{C}^{A} > V_{C}^{B}

  4. D

    VCA<VCBV_{C}^{A} < V_{C}^{B}

JEE ADVANCED 2011 · PAPER 2AC basics: rms and average values, phasorsTRANSCRIBED

A series R-C combination is connected to an AC voltage of angular frequency ω=500\omega = 500 radian/s. If the impedance of the R-C circuit is R1.25R\sqrt{1.25}, the time constant
(in millisecond) of the circuit is

JEE ADVANCED 2010 · PAPER 2AC basics: rms and average values, phasorsTRANSCRIBED

You are given many resistances, capacitors and inductors. These are connected to variable DC voltage source(the first two circuits) or an AC voltage source of 50 Hz frequency(the next three circuits) in different ways as shown in Column II. When a current (steady state for DC or rms for AC) flows through the circuit, the corresponding voltage V1V_1 and V2V_2. (indicated in circuits) are related as shown in column I. Match the two

Figure for JEE Advanced 2010 Physics question on AC basics: rms and average values, phasors
JEE ADVANCED 2010 · PAPER 1AC basics: rms and average values, phasorsTRANSCRIBED

An AC voltage source of variable angular frequency ω\omega and fixed amplitude V0V_0 is connected in series with a capacitance C and anelectric bulb of resistance R (inductance zero). When ω\omega is increased

  1. A

    the bulb glows dimmer

  2. B

    the bulb glows brighter

  3. C

    total impedance of the circuit is unchanged

  4. D

    total impedance of the circuit increases

JEE ADVANCED 2007 · PAPER 2AC basics: rms and average values, phasorsTRANSCRIBED

STATEMENT-1
A vertical iron rod has a coil of wire wound over it at the bottom end. An alternating current flows in the coil. The rod goes through a conducting ring as showing the figure. The ring can float at a certain height above the coil.
because
STATEMENT-2
In the above situation, a current is induced in the ring which interacts with the horizontal component of the magnetic field to produce an average force in the upward direction.

Figure for JEE Advanced 2007 Physics question on AC basics: rms and average values, phasors
  1. A

    Statement-1 is True, Statement-2 is True; Statement-2 is a correct explanation for Statement-1

  2. B

    Statement-1 is True, Statement-2 is True; Statement-2 is NOT a correct explanation for Statement-1

  3. C

    Statement-1 is True, Statement-2 is False

  4. D

    Statement-1 is False, Statement-2 is True