Two thin wires, Wire-1 of diameter and Wire-2 of unknown diameter are given. To obtain the value of , the diameters of the two wires are measured with a screw gauge. The screw gauge has a pitch of and there are divisions on the circular scale (CS). The smallest division on the linear scale (LS) is . The table shows the readings of LS and CS for the measurements. The value of (in ) is:
| Readings | ||
| LS (mm) | CS | |
| Wire-1 | 0.5 | 42 |
| Wire-2 | 1.5 | 95 |
A screw gauge measures small dimensions by converting rotational movement into linear along a main scale
(linear scale).
The Least Count (LC) is the smallest distance that can be measured accurately with the instrument. It represents
the linear distance by the screw when the circular scale is rotated through exactly one division:
When a screw gauge is clamped around an object, the total measured dimension (D) is combination of the
visible reading on the main linear scale with the fractional reading from the circular scale:
The pitch of given screw gauge is and the total circular scale divisions is 100.
So, the least count is
For Wire-1:
The linear scale reading is
The circular scale reading is
Using the measurement formula:
A positive zero error of means the instrument reads high because its circular zero mark has already
progressed past the linear index line before an object is inserted.
For Wire-2 the linear scale reading is and the circular scale reading is
So, the unknown diameter of second wire is
As
Therefore, the value of is 1915.
Tagged Dimensional formulae of physical quantities. Machine-assigned, so read it as a strong shortlist rather than a verdict.