RankRizz

Mechanical Properties of Solids — JEE Main Previous Year Questions

Every Mechanical Properties of Solids question JEE Main has set from 2004–2026, grouped by the idea it tests rather than the order of the syllabus. 126 questions across 6 distinct ideas. Free to read, answer key on every one.

Questions

126

Distinct ideas

6

Share of marks

3.4%

Difficulty

EASY

The ideas inside Mechanical Properties of Solids

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Mechanical Properties of Solids questions actually test.

Every Mechanical Properties of Solids question

61–80 OF 126 · NEWEST FIRST

JEE MAIN 2022 · 28 JUL S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The force required to stretch a wire of cross-section 1 cm2^2 to double its length will be: (Given Young's modulus of the wire =2×1011= 2 \times 10^{11} N m−2^{-2})

  1. A

    1×1071 \times 10^7 N

  2. B

    1.5×1071.5 \times 10^7 N

  3. C

    2×1072 \times 10^7 N

  4. D

    2.5×1072.5 \times 10^7 N

JEE MAIN 2022 · 24 JUN S1Bulk modulus and compressibilityTRANSCRIBED

The bulk modulus of a liquid is 3×10103 \times 10^{10} Nm−2^{-2}. The pressure required to reduce the volume of liquid by 2%2\% is :

  1. A

    3×1083 \times 10^{8} N m−2^{-2}

  2. B

    6×1086 \times 10^{8} N m−2^{-2}

  3. C

    9×1089 \times 10^{8} N m−2^{-2}

  4. D

    12×10812 \times 10^{8} N m−2^{-2}

JEE MAIN 2022 · 27 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A steel wire of length 3.2 m (YS=2.0×1011 Nm−2)(Y_S = 2.0 \times 10^{11} \ N m^{-2}) and a copper wire of length 4.4 m (YC=1.1×1011 Nm−2)(Y_C = 1.1 \times 10^{11} \ N m^{-2}), both of radius 1.4 mm are connected end to end. When stretched by a load, the net elongation is found to be 1.4 mm. The load applied, in Newton, will be: (Given π=227\pi = \frac{22}{7})

  1. A

    360

  2. B

    180

  3. C

    1080

  4. D

    154

JEE MAIN 2022 · 29 JUL S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

If the length of a wire is made double and radius is halved of its respective values. Then, the Young's modulus of the material of the wire will:

  1. A

    Remain same

  2. B

    Become 8 times its initial value

  3. C

    Become 1th4\frac{1^{th}}{4} of its initial value

  4. D

    Become 4 times its initial value

JEE MAIN 2022 · 29 JUN S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A wire of length LL is hanging from a fixed support. The length changes to L1L_1 and L2L_2 when masses 1 kg and 2 kg are suspended respectively from its free end. Then the value of LL is equal to

  1. A

    L1L2\sqrt{L_1 L_2}

  2. B

    L1+L22\frac{L_1 + L_2}{2}

  3. C

    2L1−L22L_1 - L_2

  4. D

    3L1−L23L_1 - L_2

JEE MAIN 2022 · 29 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A metal wire of length 0.5 m and cross-sectional area 10−410^{-4} m2^2 has breaking stress 5×1085 \times 10^8 N m−2^{-2}. A block of 10 kg is attached at one end of the string and is rotating in a horizontal circle. The maximum linear velocity of block will be _____ m s−1^{-1}

JEE MAIN 2022 · 26 JUN S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The elongation of a wire on the surface of the earth is 10−410^{-4} m. The same wire of same dimensions is elongated by 6×10−56 \times 10^{-5} m on another planet. The acceleration due to gravity on the planet will be ______ m s−2^{-2}. (Take acceleration due to gravity on the surface of earth =10= 10 m s−2^{-2})

JEE MAIN 2022 · 25 JUL S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A wire of length LL and radius rr is clamped rigidly at one end. When the other end of the wire is pulled by a force FF, its length increases by 5 cm5 \text{ cm}. Another wire of the same material of length 4L4L and radius 4r4r is pulled by a force 4F4F under same conditions. The increase in length of this wire is ______ cm.

JEE MAIN 2022 · 26 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A uniform heavy rod of mass 20 kg20 \text{ kg}, cross sectional area 0.4 m20.4 \text{ m}^2 and length 20 m20 \text{ m} is hanging from a fixed support. Neglecting the lateral contraction, the elongation in the rod due to its own weight is x×10−9 mx \times 10^{-9} \text{ m}. The value of xx is ______. (Given: Young's modulus Y=2×1011 N m−2Y = 2 \times 10^{11} \text{ N m}^{-2} and g=10 m s−2g = 10 \text{ m s}^{-2})

JEE MAIN 2022 · 27 JUL S1Modulus of rigidity and Poisson's ratioTRANSCRIBED

A square aluminium (shear modulus is 25×109 N m−225 \times 10^9 \text{ N m}^{-2}) slab of side 60 cm60 \text{ cm} and thickness 15 cm15 \text{ cm} is subjected to a shearing force (on its narrow face) of 18.0×104 N18.0 \times 10^4 \text{ N}. The lower edge is riveted to the floor. The displacement of the upper edge is ______ μm\mu m.

JEE MAIN 2022 · 27 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

In an experiment to determine the Young's modulus, steel wires of five different lengths (1, 2, 3, 4 and 5 m) but of same cross-section area (2 mm2)(2 \ mm^2) were taken and the curves between extension and load were obtained. The slope (extension/load) of the curves were plotted with the wire length and the following graph was obtained. If the Young's modulus of the given steel wire is x×1011 Nm−2x \times 10^{11} \ N m^{-2}, then the value of xx is _____

Figure for JEE Main 2022 Physics question on Stress, strain, Hooke's law and Young's modulus
JEE MAIN 2022 · 26 JUN S1Elastic potential energy in stretched wiresTRANSCRIBED

The elastic behaviour of material for linear stress and linear strain, is shown in the figure. The energy density for a linear strain of 5×10−45 \times 10^{-4} is ______ kJ m−3^{-3}. Assume that material is elastic upto the linear strain of 5×10−45 \times 10^{-4}.

Figure for JEE Main 2022 Physics question on Elastic potential energy in stretched wires
JEE MAIN 2022 · 28 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A string of area of cross-section 4 mm2^2 and length 0.5 is connected with a rigid body of mass 2 kg. The body is rotated in a vertical circular path of radius 0.5 m. The body acquires a speed of 5 m s−1^{-1} at the bottom of the circular path. Strain produced in the string when the body is at the bottom of the circle is _____ ×10−5\times 10^{-5}. (Use Young's modulus 101110^{11} N m−2^{-2} and g=10 ms−2g = 10 \ m s^{-2})

JEE MAIN 2022 · 29 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The speed of a transverse wave passing through a string of length 50 cm and mass 10 g is 60 m s−1^{-1}. The area of cross-section of the wire is 2.0 mm2^2 and its Young's modulus is 1.2×10111.2 \times 10^{11} N m−2^{-2}. The extension of the wire over its natural length due to its tension will be x×10−5x \times 10^{-5} m. The value of x is _____

JEE MAIN 2021 · 20 JUL S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The value of tension in a long thin metal wire has been changed from T1T_1 to T2T_2. The lengths of the metal wire at two different values of tension T1T_1 and T2T_2 are ℓ1\ell_1 and ℓ2\ell_2, respectively. The actual length of the metal wire is:

  1. A

    T1ℓ2−T2ℓ1T1−T2\frac{T_1\ell_2 - T_2\ell_1}{T_1 - T_2}

  2. B

    T1ℓ1−T2ℓ2T1−T2\frac{T_1\ell_1 - T_2\ell_2}{T_1 - T_2}

  3. C

    ℓ1+ℓ22\frac{\ell_1 + \ell_2}{2}

  4. D

    T1T2ℓ1ℓ2\sqrt{T_1 T_2 \ell_1 \ell_2}

JEE MAIN 2021 · 17 MAR S2Bulk modulus and compressibilityTRANSCRIBED

An object is located at 2 km beneath the surface of the water. If the fractional compression ΔVV\frac{\Delta V}{V} is 1.36%, the ratio of hydraulic stress to the corresponding hydraulic strain will be ________. [Given: density of water is 1000 kg m−3^{-3} and g=9.8g = 9.8 m s−2^{-2}].

  1. A

    1.96×1071.96 \times 10^{7} N m−2^{-2}

  2. B

    1.44×1071.44 \times 10^{7} N m−2^{-2}

  3. C

    2.26×1092.26 \times 10^{9} N m−2^{-2}

  4. D

    1.44×1091.44 \times 10^{9} N m−2^{-2}

JEE MAIN 2021 · 25 JUL S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Two wires of same length and radius are joined end to end and loaded. The Young's moduli of the materials of the two wires are Y1Y_1 and Y2Y_2. The combination behaves as a single wire then its Young's modulus is:

  1. A

    Y=2Y1Y23Y1+Y2Y = \frac{2Y_1Y_2}{3Y_1 + Y_2}

  2. B

    Y=2Y1Y2Y1+Y2Y = \frac{2Y_1Y_2}{Y_1 + Y_2}

  3. C

    Y=Y1Y22Y1+Y2Y = \frac{Y_1Y_2}{2Y_1 + Y_2}

  4. D

    Y=Y1Y2Y1+Y2Y = \frac{Y_1Y_2}{Y_1 + Y_2}

JEE MAIN 2021 · 24 FEB S1Modulus of rigidity and Poisson's ratioTRANSCRIBED

If YY, KK and η\eta are the values of Young's modulus, bulk modulus and modulus of rigidity of any material respectively. Choose the correct relation for these parameters.

  1. A

    Y=9Kη3K−ηY = \frac{9K\eta}{3K - \eta} N m−2^{-2}

  2. B

    η=3YK9K+Y\eta = \frac{3YK}{9K + Y} N m−2^{-2}

  3. C

    K=Yη9η−3YK = \frac{Y\eta}{9\eta - 3Y} N m−2^{-2}

  4. D

    Y=9Kη2η+3KY = \frac{9K\eta}{2\eta + 3K} N m−2^{-2}

JEE MAIN 2021 · 25 FEB S1Thermal stressTRANSCRIBED

Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R.
Assertion A: When a rod lying freely is heated, no thermal stress is developed in it.
Reason R: On heating, the length of the rod increases.
In the light of the above statements, choose the correct answer from the options given below:

  1. A

    Both A and R are true and R is the correct explanation of A

  2. B

    A is false but R is true

  3. C

    Both A and R are true but R is NOT the correct explanation of A

  4. D

    A is true but R is false

JEE MAIN 2021 · 31 AUG S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A uniform heavy rod of weight 10 kg m s−2^{-2}, cross-sectional area 100 cm2^2 and length 20 cm is hanging from a fixed support. Young modulus of the material of the rod is 2×10112 \times 10^{11} N m−2^{-2}. Neglecting the lateral contraction, find the elongation of rod due to its own weight:

  1. A

    5×10−105 \times 10^{-10} m

  2. B

    4×10−84 \times 10^{-8} m

  3. C

    5×10−85 \times 10^{-8} m

  4. D

    2×10−92 \times 10^{-9} m