A steel wire (length 3.2 m, YS=2.0×1011 N/m2) and a copper wire (length 4.4 m, YC=1.1×1011 N/m2), both of radius 1.4 mm, are connected end to end. The net elongation is 1.4 mm. We wish to find the load required.
First, the radius of each wire is r=1.4 mm=1.4×10−3 m. Hence, the cross-sectional area is
A=πr2=722×(1.4×10−3)2=722×1.96×10−6
which simplifies to
A=22×0.28×10−6=6.16×10−6 m2.
Since the wires are in series, the same load F acts on both. Using the relation Δl=YAFl, we have
ΔlS=2.0×1011×6.16×10−6F×3.2
for the steel wire and
ΔlC=1.1×1011×6.16×10−6F×4.4
for the copper wire.
The total elongation is given by
ΔlS+ΔlC=1.4×10−3 m,
so that
F(2.0×1011×6.16×10−63.2+1.1×1011×6.16×10−64.4)=1.4×10−3.
Substituting and simplifying each term yields
2.0×1011×6.16×10−63.2=1.232×1063.2=2.597×10−6,
1.1×1011×6.16×10−64.4=6.776×1054.4=6.494×10−6,
and hence the sum is
2.597×10−6+6.494×10−6=9.091×10−6.
From the above, we solve for F:
F=9.091×10−61.4×10−3=9.0911400≈154 N.
Answer: Option D: 154