RankRizz

Mechanical Properties of Solids — JEE Main Previous Year Questions

Every Mechanical Properties of Solids question JEE Main has set from 2004–2026, grouped by the idea it tests rather than the order of the syllabus. 126 questions across 6 distinct ideas. Free to read, answer key on every one.

Questions

126

Distinct ideas

6

Share of marks

3.4%

Difficulty

EASY

The ideas inside Mechanical Properties of Solids

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Mechanical Properties of Solids questions actually test.

Every Mechanical Properties of Solids question

21–40 OF 126 · NEWEST FIRST

JEE MAIN 2025 · 04 APR S1Modulus of rigidity and Poisson's ratioTRANSCRIBED

Two slabs with square cross section of different materials (1, 2) with equal sides (ll) and thickness d1d_1 and d2d_2 such that d2=2d1d_2 = 2d_1 and l>d2l \gt d_2. Considering lower edges of these slabs are fixed to the floor, we apply equal shearing force on the narrow faces. The angle of deformation is θ2=2θ1\theta_2 = 2\theta_1. If the shear moduli of material 1 is 4×1094 \times 10^9 N/m2^2, then shear moduli of material 2 is x×109x \times 10^9, where value of x is ________.

JEE MAIN 2025 · 08 APR S2Bulk modulus and compressibilityTRANSCRIBED

A sample of a liquid is kept at 1 atm. It is compressed to 5 atm which leads to change of volume of 0.8 cm3^3. If the bulk modulus of the liquid is 2 GPa, the initial volume of the liquid was _____ litre. (Take 1 atm = 10510^5 Pa)

JEE MAIN 2025 · 24 JAN S2Bulk modulus and compressibilityTRANSCRIBED

The increase in pressure required to decrease the volume of a water sample by  0.20.2%  is  P×105 Nm−2.P \times10^5\,Nm^{-2}. Bulk modulus of water is  2.15×109 Nm−2.2.15\times10^9\,Nm^{-2}.  The value of  PP  is  ‾.\underline{\hspace{2cm}}.

JEE MAIN 2025 · 02 APR S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The length of a light string is 1.4 m when the tension on it is 5 N. If the tension increases to 7 N, the length of the string is 1.56 m. The original length of the string is _________ m.

JEE MAIN 2025 · 28 JAN S2Bulk modulus and compressibilityTRANSCRIBED

The volume contraction of a solid copper cube of edge length 10 cm , when subjected to a hydraulic pressure of 7×106Pa7 \times 10^{6}Pa, would be ____ mm3mm^{3}. (Given bulk modulus of copper =1.4×1011Nm−2= 1.4 \times 10^{11} Nm^{-2})

JEE MAIN 2024 · 27 JAN S2Stress-strain curve and elastic behaviourTRANSCRIBED

Given below are two statements : one is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A) : The property of body, by virtue of which it tends to regain its original shape when the external force is removed, is Elasticity.
Reason (R) : The restoring force depends upon the bonded inter atomic and inter molecular force of solid.
In the light of the above statements, choose the correct answer from the options given below :

  1. A

    (A) is false but (R) is true

  2. B

    (A) is true but (R) is false

  3. C

    Both (A) and (R) are true and (R) is the correct explanation (A)

  4. D

    Both (A) and (R) are true but (R) is not the correct explanation of (A)

JEE MAIN 2024 · 29 JAN S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A wire of length LL and radius rr is clamped at one end. If its other end is pulled by a force FF, its length increases by ll. If the radius of the wire and the applied force both are reduced to half of their original values keeping original length constant, the increase in length will become:

  1. A

    33 times

  2. B

    32\frac{3}{2} times

  3. C

    44 times

  4. D

    22 times

JEE MAIN 2024 · 30 JAN S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Young's modulus of material of a wire of length LL and cross-sectional area AA is YY. If the length of the wire is doubled and cross-sectional area is halved then Young's modulus will be:

  1. A

    Y4\frac{Y}{4}

  2. B

    4Y4Y

  3. C

    YY

  4. D

    2Y2Y

JEE MAIN 2024 · 01 FEB S1Stress-strain curve and elastic behaviourTRANSCRIBED

With rise in temperature, the Young's modulus of elasticity

  1. A

    changes erratically

  2. B

    decreases

  3. C

    increases

  4. D

    remains unchanged

JEE MAIN 2024 · 04 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

An elastic spring under tension of 3 N has a length a. Its length is b under tension 2 N. For its length (3a − 2b), the value of tension will be ______ N.

JEE MAIN 2024 · 01 FEB S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

One end of a metal wire is fixed to a ceiling and a load of 2 kg hangs from the other end. A similar wire is attached to the bottom of the load and another load of 1 kg hangs from this lower wire. Then the ratio of longitudinal strain of upper wire to that of the lower wire will be [Area of cross section of wire = 0.005 cm20.005 \text{ cm}^2, Y=2×1011 N m−2Y = 2 \times 10^{11} \text{ N m}^{-2} and g=10 m s−2g = 10 \text{ m s}^{-2}]

JEE MAIN 2024 · 27 JAN S1Bulk modulus and compressibilityTRANSCRIBED

If average depth of an ocean is 40004000 m and the bulk modulus of water is 2×109 N m−22 \times 10^9 \text{ N m}^{-2}, then fractional compression ΔVV\frac{\Delta V}{V} of water at the bottom of ocean is α×10−2\alpha \times 10^{-2}. The value of α\alpha is _______, (Given, g=10 m s−2,ρ=1000 kg m−3g = 10 \text{ m s}^{-2}, \rho = 1000 \text{ kg m}^{-3})

JEE MAIN 2024 · 29 JAN S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Two metallic wires PP and QQ have same volume and are made up of same material. If their area of cross sections are in the ratio 4:14 : 1 and force F1F_1 is applied to PP, an extension of Δl\Delta l is produced. The force which is required to produce same extension in QQ is F2F_2. The value of F1F2\frac{F_1}{F_2} is ______.

JEE MAIN 2024 · 30 JAN S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Each of the three blocks PP, QQ and RR shown in the figure has a mass of 3 kg3 \text{ kg}. Each of the wire AA and BB has a cross-sectional area 0.005 cm20.005 \text{ cm}^2 and a Young's modulus 2×1011 N m−22 \times 10^{11} \text{ N m}^{-2}. Neglecting friction, the longitudinal strain on wire BB is ____×10−4\_\_\_\_ \times 10^{-4}. (Take g=10 m s−2g = 10 \text{ m s}^{-2})

Figure for JEE Main 2024 Physics question on Stress, strain, Hooke's law and Young's modulus
JEE MAIN 2024 · 31 JAN S1Bulk modulus and compressibilityTRANSCRIBED

The depth below the surface of sea to which a rubber ball be taken so as to decrease its volume by 0.02%0.02\% is _____ m. (Take density of sea water =103 kg m−3= 10^3 \text{ kg m}^{-3}, Bulk modulus of rubber =9×108 N m−2= 9 \times 10^8 \text{ N m}^{-2}, and g=10 m s−2g = 10 \text{ m s}^{-2})

JEE MAIN 2024 · 31 JAN S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Two blocks of mass 2 kg and 4 kg are connected by a metal wire going over a smooth pulley as shown in figure. The radius of wire is 4.0×10−54.0 \times 10^{-5} m and Young's modulus of the metal is 2.0×10112.0 \times 10^{11} N m−2^{-2}. The longitudinal strain developed in the wire is 1απ\frac{1}{\alpha\pi}. The value of α\alpha is [Use g=10g = 10 m s−2^{-2}]

Figure for JEE Main 2024 Physics question on Stress, strain, Hooke's law and Young's modulus
JEE MAIN 2024 · 05 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The density and breaking stress of a wire are 6×104 kg/m36 \times 10^4 \text{ kg/m}^3 and 1.2×108 N/m21.2 \times 10^8 \text{ N/m}^2 respectively. The wire is suspended from a rigid support on a planet where acceleration due to gravity is 13rd\frac{1}{3}^{rd} of the value on the surface of earth. The maximum length of the wire with breaking is ______ m (take, g=10 m/s2g = 10 \text{ m/s}^2).

JEE MAIN 2024 · 06 APR S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A wire of cross sectional area A, modulus of elasticity 2×1011 Nm−22 \times 10^{11} \text{ Nm}^{-2} and length 2 m2 \text{ m} is stretched between two vertical rigid supports. When a mass of 2 kg2 \text{ kg} is suspended at the middle, it sags lower from its original position making an angle θ=1100\theta = \frac{1}{100} radian on the points of support. The value of A is ___________ ×10−4 m2\times 10^{-4} \text{ m}^2 (consider x<<Lx << L). (given : g=10 m/s2g = 10 \text{ m/s}^2)

Figure for JEE Main 2024 Physics question on Stress, strain, Hooke's law and Young's modulus
JEE MAIN 2024 · 09 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Two persons pull a wire towards themselves. Each person exerts a force of 200200 N on the wire. Young's modulus of the material of wire is 1×10111 \times 10^{11} N m−2^{-2}. Original length of the wire is 22 m and the area of cross section is 22 cm2^2. The wire will extend in length by ______ μ\mum.

JEE MAIN 2023 · 24 JAN S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A 100 m long wire having cross-sectional area 6.25×10−4 m26.25 \times 10^{-4} \text{ m}^2 and Young's modulus is 1010 N m−210^{10} \text{ N m}^{-2} is subjected to a load of 250 N, then the elongation in the wire will be :

  1. A

    6.25×10−36.25 \times 10^{-3} m

  2. B

    4×10−44 \times 10^{-4} m

  3. C

    6.25×10−66.25 \times 10^{-6} m

  4. D

    4×10−34 \times 10^{-3} m