RankRizz
JEE MAIN 2022 · 27 JUL S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2022 Physics question — Stress, strain, Hooke's law and Young's modulus

In an experiment to determine the Young's modulus, steel wires of five different lengths (1, 2, 3, 4 and 5 m) but of same cross-section area (2 mm2)(2 \ mm^2) were taken and the curves between extension and load were obtained. The slope (extension/load) of the curves were plotted with the wire length and the following graph was obtained. If the Young's modulus of the given steel wire is x×1011 Nm−2x \times 10^{11} \ N m^{-2}, then the value of xx is _____

Figure for JEE Main 2022 Physics question on Stress, strain, Hooke's law and Young's modulus
SOLUTION

Y=StressStrain=F/AΔL/LY = \frac{\text{Stress}}{\text{Strain}} = \frac{F/A}{\Delta L/L}

ΔLF=(1AY)⋅L\frac{\Delta L}{F} = \left( \frac{1}{AY} \right) \cdot L

This is a linear equation (y=m⋅xaxisy = m \cdot x_{axis}) where the slope is 1AY\frac{1}{AY}.

At L=4 mL = 4\text{ m}, the value on the yy-axis is 1.0×10−5 N−1 m1.0 \times 10^{-5} \text{ N}^{-1} \text{ m}.

Slope=Extension/LoadLength=1.0×10−54=0.25×10−5 N−1Slope = \frac{\text{Extension/Load}}{\text{Length}} = \frac{1.0 \times 10^{-5}}{4} = 0.25 \times 10^{-5} \text{ N}^{-1}

Y=1A⋅SlopeY = \frac{1}{A \cdot Slope}

Y=1(2×10−6)×(0.25×10−5)Y = \frac{1}{(2 \times 10^{-6}) \times (0.25 \times 10^{-5})}

Y=10.5×10−11=2×1011 N m−2Y = \frac{1}{0.5 \times 10^{-11}} = 2 \times 10^{11} \text{ N m}^{-2}

x=2x = 2

Tagged Stress, strain, Hooke's law and Young's modulus. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicStress, strain, Hooke's law and Young's modulus
TypeNumerical answer