RankRizz

Mechanical Properties of Solids — JEE Main Previous Year Questions

Every Mechanical Properties of Solids question JEE Main has set from 2004–2026, grouped by the idea it tests rather than the order of the syllabus. 126 questions across 6 distinct ideas. Free to read, answer key on every one.

Questions

126

Distinct ideas

6

Share of marks

3.4%

Difficulty

EASY

The ideas inside Mechanical Properties of Solids

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Mechanical Properties of Solids questions actually test.

Every Mechanical Properties of Solids question

41–60 OF 126 · NEWEST FIRST

JEE MAIN 2023 · 24 JAN S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A 100 m long wire having cross-sectional area 6.25×10−46.25 \times 10^{-4} m2^2 and Young's modulus is 101010^{10} N m−2^{-2} is subjected to a load of 250 N, then the elongation in the wire will be:

  1. A

    6.25×10−36.25 \times 10^{-3} m

  2. B

    4×10−44 \times 10^{-4} m

  3. C

    6.25×10−66.25 \times 10^{-6} m

  4. D

    4×10−34 \times 10^{-3} m

JEE MAIN 2023 · 01 FEB S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The Young's modulus of a steel wire of length 66 m and cross-sectional area 33 mm2^2, is 2×10112 \times 10^{11} N/m2^2. The wire is suspended from its support on a given planet. A block of mass 44 kg is attached to the free end of the wire. The acceleration due to gravity on the planet is 14\frac{1}{4} of its value on the earth. The elongation of wire is (Take gg on the earth =10= 10 m/s2^2):

  1. A

    11 cm

  2. B

    11 mm

  3. C

    0.10.1 mm

  4. D

    0.10.1 cm

JEE MAIN 2023 · 31 JAN S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Under the same load, wire A having length 5.0 m and cross section 2.5×10−52.5 \times 10^{-5} m2^2 stretches uniformly by the same amount as another wire B of length 6.0 m and a cross section of 3.0×10−53.0 \times 10^{-5} m2^2 stretches. The ratio of the Young's modulus of wire A to that of wire B will be:

  1. A

    1 : 4

  2. B

    1 : 1

  3. C

    1 : 10

  4. D

    1 : 2

JEE MAIN 2023 · 30 JAN S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A force is applied to a steel wire AA, rigidly clamped at one end. As a result elongation in the wire is 0.20.2 mm. If same force is applied to another steel wire BB of double the length and a diameter 2.42.4 times that of the wire AA, the elongation in the wire BB will be (wires having uniform circular cross sections)

  1. A

    6.06×10−26.06 \times 10^{-2} mm

  2. B

    2.77×10−22.77 \times 10^{-2} mm

  3. C

    3.0×10−23.0 \times 10^{-2} mm

  4. D

    6.9×10−26.9 \times 10^{-2} mm

JEE MAIN 2023 · 10 APR S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Young's moduli of the material of wires AA and BB are in the ratio of 1 : 4, while its area of cross sections are in the ratio of 1 : 3. If the same amount of load is applied to both the wires, the amount of elongation produced in the wires A and B will be in the ratio of [Assume length of wires A and B are same]

  1. A

    12 : 1

  2. B

    1 : 36

  3. C

    36 : 1

  4. D

    1 : 12

JEE MAIN 2023 · 30 JAN S1Modulus of rigidity and Poisson's ratioTRANSCRIBED

Choose the correct relationship between Poisson ratio σ\sigma, bulk modulus (K)(K) and modulus of rigidity η\eta of a given solid object:

  1. A

    σ=3K−2η6K+2η\sigma = \frac{3K - 2\eta}{6K + 2\eta}

  2. B

    σ=6K+2η3K−2η\sigma = \frac{6K + 2\eta}{3K - 2\eta}

  3. C

    σ=3K+2η6K+2η\sigma = \frac{3K + 2\eta}{6K + 2\eta}

  4. D

    σ=6K−2η3K−2η\sigma = \frac{6K - 2\eta}{3K - 2\eta}

JEE MAIN 2023 · 15 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A wire of length LL and radius rr is clamped rigidly at one end. When the other end of the wire is pulled by a force ff, its length increases by ll. Another wire of same material of length 2L2L and radius 2r2r is pulled by a force 2f2f. Then the increase in its length will be:

  1. A

    4l4l

  2. B

    l2\frac{l}{2}

  3. C

    2l2l

  4. D

    ll

JEE MAIN 2023 · 24 JAN S2Stress-strain curve and elastic behaviourTRANSCRIBED

Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R
Assertion (A): Steel is used in the construction of buildings and bridges.
Reason (R): Steel is more elastic and its elastic limit is high.
In the light of above statements, choose the most appropriate answer from the options given below

  1. A

    Both AA and RR are correct and RR is the correct explanation of AA

  2. B

    Both AA and RR are correct but RR is NOT the correct explanation of AA

  3. C

    AA is correct but RR is not correct

  4. D

    AA is not correct but RR is correct

JEE MAIN 2023 · 13 APR S1Bulk modulus and compressibilityTRANSCRIBED

Under isothermal condition, the pressure of a gas is given by P=aV−3P = aV^{-3}, where aa is a constant and VV is the volume of the gas. The bulk modulus at constant temperature is equal to

  1. A

    3P3P

  2. B

    PP

  3. C

    2P2P

  4. D

    P2\frac{P}{2}

JEE MAIN 2023 · 08 APR S1Elastic potential energy in stretched wiresTRANSCRIBED

An aluminium rod with Young's modulus Y=7.0×1010Y = 7.0 \times 10^{10} N m−2^{-2} undergoes elastic strain of 0.04%. The energy per unit volume stored in the rod in SI unit

  1. A

    2800

  2. B

    11200

  3. C

    5600

  4. D

    8400

JEE MAIN 2023 · 13 APR S1Elastic potential energy in stretched wiresTRANSCRIBED

The elastic potential energy stored in a steel wire of length 2020 m stretched through 22 cm is 8080 J. The cross sectional area of the wire is _____ mm2^2. (Given, Y=2.0×1011Y = 2.0 \times 10^{11} N m−2^{-2})

JEE MAIN 2023 · 08 APR S2Thermal stressTRANSCRIBED

A steel rod of length 1 m and cross-sectional area 10−410^{-4} m2^2 is heated from 0∘^\circC to 200∘^\circC without being allowed to extend or bend. The compressive tension produced in the rod is _______ ×104\times 10^4 N. (Given Young's modulus of steel =2×1011= 2 \times 10^{11} N m−2^{-2}, coefficient of linear expansion =10−5= 10^{-5} K−1^{-1})

JEE MAIN 2023 · 06 APR S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A metal block of mass mm is suspended from a rigid support through a metal wire of diameter 14 mm. The tensile stress developed in the wire under equilibrium state is 7×1057 \times 10^5 N m−2^{-2}. The value of mass mm is ______ kg.
(Take g=9.8g = 9.8 m s−2^{-2} and π=227\pi = \dfrac{22}{7})

JEE MAIN 2023 · 01 FEB S1Bulk modulus and compressibilityTRANSCRIBED

A certain pressure 'P' is applied to 1 litre of water and 2 litre of a liquid separately. Water gets compressed to 0.01% whereas the liquid gets compressed to 0.03%. The ratio of Bulk modulus of water to that of the liquid is 3x\frac{3}{x}. The value of xx is _____.

JEE MAIN 2023 · 10 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Two wires each of radius 0.2 cm and negligible mass, one made of steel and the other made of brass are loaded as shown in the figure. The elongation of the steel wire is _______ ×10−6\times 10^{-6} m. [Young's modulus for steel =2×1011= 2 \times 10^{11} N m−2^{-2} and g=10g = 10 m s−2^{-2}]

Figure for JEE Main 2023 Physics question on Stress, strain, Hooke's law and Young's modulus
JEE MAIN 2023 · 31 JAN S1Thermal stressTRANSCRIBED

A thin rod having a length of 1 m and area of cross-section 3×10−63 \times 10^{-6} m2^2 is suspended vertically from one end. The rod is cooled from 210°C to 160°C. After cooling, a mass MM is attached at the lower end of the rod such that the length of rod again becomes 1 m. Young's modulus and coefficient of linear expansion of the rod are 2×10112 \times 10^{11} N m−2^{-2} and 2×10−52 \times 10^{-5} K−1^{-1}, respectively. The value of MM is ______ kg. (Take g=10g = 10 m s−2^{-2})

JEE MAIN 2023 · 25 JAN S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

As shown in the figure, in an experiment to determine Young's modulus of a wire, the extension-load curve is plotted. The curve is a straight line passing through the origin and makes an angle of 45° with the load axis. The length of the wire is 62.8 cm and its diameter is 4 mm. The Young's modulus is found to be x×104x \times 10^4 N m−2^{-2}. The value of xx is _____.

Figure for JEE Main 2023 Physics question on Stress, strain, Hooke's law and Young's modulus
JEE MAIN 2023 · 06 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A steel rod has a radius of 20 mm and a length of 2.0 m. A force of 62.8 kN stretches it along its length. Young's modulus of steel is 2.0×10112.0 \times 10^{11} N m−2^{-2}. The longitudinal strain produced in the wire is ______ ×10−5\times 10^{-5}.

JEE MAIN 2023 · 11 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The length of a wire becomes l1l_1 and l2l_2 when 100 N and 120 N tension are applied respectively. If 10l2=11l110l_2 = 11l_1, then the natural length of wire will be 1xl1\frac{1}{x}l_1. Here the value of xx is _______

JEE MAIN 2022 · 26 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The area of cross section of the rope used to lift a load by a crane is 2.5×10−4 m22.5 \times 10^{-4} \text{ m}^2. The maximum lifting capacity of the crane is 10 metric tons. To increase the lifting capacity of the crane to 25 metric tons, the required area of cross section of the rope should be (take g=10 m s−2g = 10 \text{ m s}^{-2})

  1. A

    6.25×10−4 m26.25 \times 10^{-4} \text{ m}^2

  2. B

    10×10−4 m210 \times 10^{-4} \text{ m}^2

  3. C

    1×10−4 m21 \times 10^{-4} \text{ m}^2

  4. D

    1.67×10−4 m21.67 \times 10^{-4} \text{ m}^2