RankRizz

Thermal Properties of Matter — JEE Main Previous Year Questions

Every Thermal Properties of Matter question JEE Main has set from 2004–2026, grouped by the idea it tests rather than the order of the syllabus. 116 questions across 6 distinct ideas. Free to read, answer key on every one.

Questions

116

Distinct ideas

6

Share of marks

1.6%

Difficulty

MEDIUM

The ideas inside Thermal Properties of Matter

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Thermal Properties of Matter questions actually test.

Every Thermal Properties of Matter question

41–60 OF 116 · NEWEST FIRST

JEE MAIN 2022 · 27 JUL S1Heat conduction and thermal resistanceTRANSCRIBED

If K1K_1 and K2K_2 are the thermal conductivities, L1L_1 and L2L_2 are the lengths and A1A_1 and A2A_2 are the cross sectional areas of steel and copper rods respectively such that K2K1=9\dfrac{K_2}{K_1} = 9, A1A2=2\dfrac{A_1}{A_2} = 2, L1L2=2\dfrac{L_1}{L_2} = 2. Then, for the arrangement as shown in the figure, the value of temperature TT of the steel-copper junction in the steady state will be

Figure for JEE Main 2022 Physics question on Heat conduction and thermal resistance
  1. A

    18°C18°C

  2. B

    14°C14°C

  3. C

    45°C45°C

  4. D

    150°C150°C

JEE MAIN 2022 · 24 JUN S1Heat conduction and thermal resistanceTRANSCRIBED

Two metallic blocks M1M_1 and M2M_2 of same area of cross-section are connected to each other (as shown in figure). If the thermal conductivity of M2M_2 is KK then the thermal conductivity of M1M_1 will be : [Assume steady state heat conduction]

Figure for JEE Main 2022 Physics question on Heat conduction and thermal resistance
  1. A

    10K10K

  2. B

    8K8K

  3. C

    12.5K12.5K

  4. D

    2K2K

JEE MAIN 2022 · 27 JUN S2Change of state and latent heatTRANSCRIBED

A lead bullet penetrates into a solid object and melts. Assuming that 40%40\% of its kinetic energy is used to heat it, the initial speed of bullet is
(Given, initial temperature of the bullet =127°= 127°C, Melting point of the bullet =327°= 327°C, Latent heat of fusion of lead =2.5×104= 2.5 \times 10^4 J kg−1^{-1}, Specific heat capacity of lead =125= 125 J kg−1^{-1} K−1^{-1})

  1. A

    125125 m s−1^{-1}

  2. B

    500500 m s−1^{-1}

  3. C

    250250 m s−1^{-1}

  4. D

    600600 m s−1^{-1}

JEE MAIN 2022 · 27 JUL S1Newton's law of coolingTRANSCRIBED

Read the following statements:
A. When small temperature difference between a liquid and its surrounding is doubled the rate of loss of heat of the liquid becomes twice.
B. Two bodies P and Q having equal surface areas are maintained at temperature 10°C10°C and 20°C20°C. The thermal radiation emitted in a given time by P and Q are in the ratio 1:1.151:1.15.
C. A Carnot Engine working between 100 K100 \text{ K} and 400 K400 \text{ K} has an efficiency of 75%75\%.
D. When small temperature difference between a liquid and its surrounding is quadrupled, the rate of loss of heat of the liquid becomes twice.
Choose the correct answer from the options given below:

  1. A

    A, B, C only

  2. B

    A, B only

  3. C

    A, C only

  4. D

    B, C, D only

JEE MAIN 2022 · 29 JUN S1Heat conduction and thermal resistanceTRANSCRIBED

As per the given figure, two plates AA and BB of thermal conductivity KK and 2K2K are joined together to form a compound plate. The thickness of plates are 4.0 cm and 2.5 cm respectively and the area of cross-section is 120 cm2^2 for each plate. The equivalent thermal conductivity of the compound plate is (1+5α)K\left(1 + \frac{5}{\alpha}\right)K, then the value of α\alpha will be ______.
Figure for JEE Main 2022 Physics question on Heat conduction and thermal resistance

JEE MAIN 2022 · 24 JUN S2Newton's law of coolingTRANSCRIBED

In an experiment to verify Newton's law of cooling, a graph is plotted between the temperature difference (ΔT)(\Delta T) of the water and surroundings and time as shown in figure. The initial temperature of water is taken as 80°80°C. The value of t2t_2 as mentioned in the graph will be ______

Figure for JEE Main 2022 Physics question on Newton's law of cooling
JEE MAIN 2022 · 25 JUL S2Change of state and latent heatTRANSCRIBED

A block of ice of mass 120 g120 \text{ g} at temperature 0°C0°C is put in 300 g300 \text{ g} of water at 25°C25°C. The xx g of ice melts as the temperature of the water reaches 0°C0°C. The value of xx is ______.
[Use: Specific heat capacity of water =4200 J kg−1 K−1= 4200 \text{ J kg}^{-1} \text{ K}^{-1}, Latent heat of ice =3.5×105 J kg−1= 3.5 \times 10^5 \text{ J kg}^{-1}]

JEE MAIN 2022 · 26 JUN S2Calorimetry and specific heat capacityTRANSCRIBED

A geyser heats water flowing at a rate of 2.02.0 kg per minute from 30°30°C to 70°70°C. If geyser operates on a gas burner, the rate of combustion of fuel will be ______ g min−1^{-1}.
[Heat of combustion =8×103= 8 \times 10^3 J g−1^{-1}, Specific heat of water =4.2= 4.2 J g−1^{-1} °C−1^{-1}]

JEE MAIN 2022 · 25 JUL S1Temperature scales and thermal expansionTRANSCRIBED

A unit scale is to be prepared whose length does not change with temperature and remains 20 cm20 \text{ cm}, using a bimetallic strip made of brass and iron each of different length. The length of both components would change in such a way that difference between their lengths remains constant. If length of brass is 40 cm40 \text{ cm} and length of iron will be ______ cm.
αiron=1.2×10−5 K−1\alpha_{\text{iron}} = 1.2 \times 10^{-5} \text{ K}^{-1} and αbrass=1.8×10−5 K−1\alpha_{\text{brass}} = 1.8 \times 10^{-5} \text{ K}^{-1}.

JEE MAIN 2022 · 25 JUN S1Change of state and latent heatTRANSCRIBED

A steam engine intakes 5050 g of steam at 100°100°C per minute and cools it down to 20°20°C. If latent heat of vaporization of steam is 540540 cal g−1^{-1}, then the heat rejected by the steam engine per minute is ______ ×103\times 10^3 cal
(Given : specific heat capacity of water : 11 cal g−1^{-1} °C−1^{-1})

JEE MAIN 2021 · 27 AUG S2Calorimetry and specific heat capacityTRANSCRIBED

The height of victoria's falls is 63 m. What is the difference in the temperature of water at the top and at the bottom of the fall? [Given 1 cal = 4.2 J and specific heat of water = 1 cal g−1^{-1} °C−1^{-1}]

  1. A

    14.76 °C

  2. B

    1.476 °C

  3. C

    0.147 °C

  4. D

    0.014 °C

JEE MAIN 2021 · 16 MAR S2Temperature scales and thermal expansionTRANSCRIBED

A bimetallic strip consists of metals AA and BB. It is mounted rigidly as shown. The metal AA has higher coefficient of expansion compared to that of metal BB. When the bimetallic strip is placed in a cold bath, it will:

Figure for JEE Main 2021 Physics question on Temperature scales and thermal expansion
  1. A

    Bend towards the right

  2. B

    Not bend but shrink

  3. C

    Neither bend nor shrink

  4. D

    Bend towards the left

JEE MAIN 2021 · 27 JUL S1Newton's law of coolingTRANSCRIBED

A body takes 4 min to cool from 61°C to 59°C. If the temperature of the surroundings is 30°C, the time taken by the body to cool from 51°C to 49°C is:

  1. A

    4 min.

  2. B

    3 min.

  3. C

    8 min.

  4. D

    6 min.

JEE MAIN 2021 · 17 MAR S1Heat conduction and thermal resistanceTRANSCRIBED

Two identical metal wires of thermal conductivities K1K_1 and K2K_2 respectively are connected in series. The effective thermal conductivity of the combination is:

  1. A

    2K1K2K1+K2\frac{2K_1 K_2}{K_1 + K_2}

  2. B

    K1+K22K1K2\frac{K_1 + K_2}{2K_1 K_2}

  3. C

    K1+K2K1K2\frac{K_1 + K_2}{K_1 K_2}

  4. D

    K1K2K1+K2\frac{K_1 K_2}{K_1 + K_2}

JEE MAIN 2021 · 25 JUL S1Calorimetry and specific heat capacityTRANSCRIBED

Two different metal bodies A and B of equal mass are heated at a uniform rate under similar conditions. The variation of temperature of the bodies is graphically represented as shown in the figure. The ratio of specific heat capacities is:

Figure for JEE Main 2021 Physics question on Calorimetry and specific heat capacity
  1. A

    83\frac{8}{3}

  2. B

    38\frac{3}{8}

  3. C

    34\frac{3}{4}

  4. D

    43\frac{4}{3}

JEE MAIN 2021 · 24 FEB S1Temperature scales and thermal expansionTRANSCRIBED

Each side of a box made of metal sheet in cubic shape is aa at room temperature TT, the coefficient of linear expansion of the metal sheet is α\alpha. The metal sheet is heated uniformly, by a small temperature ΔT\Delta T, so that its new temperature is T+ΔTT + \Delta T. Calculate the increase in the volume of the metal box.

  1. A

    4a3αΔT4a^3 \alpha \Delta T

  2. B

    3a3αΔT3a^3 \alpha \Delta T

  3. C

    4πa3αΔT4\pi a^3 \alpha \Delta T

  4. D

    43πa3αΔT\frac{4}{3}\pi a^3 \alpha \Delta T

JEE MAIN 2021 · 31 AUG S2Heat conduction and thermal resistanceTRANSCRIBED

Two thin metallic spherical shells of radii r1r_1 and r2r_2 (r1<r2r_1 < r_2) are placed with their centres coinciding. A material of thermal conductivity KK is filled in the space between the shells. The inner shell is maintained at temperature θ1\theta_1 and the outer shell at temperature θ2\theta_2 (θ1<θ2\theta_1 < \theta_2). The rate at which heat flows radially through the material is:

  1. A

    Kθ2−θ1r2−r1\frac{K\theta_2 - \theta_1}{r_2 - r_1}

  2. B

    K(θ2−θ1)r2r14πr1r2\frac{K(\theta_2 - \theta_1)r_2 r_1}{4\pi r_1 r_2}

  3. C

    πKr1r2(θ2−θ1)r2−r1\frac{\pi K r_1 r_2(\theta_2 - \theta_1)}{r_2 - r_1}

  4. D

    4πKr1r2(θ2−θ1)r2−r1\frac{4\pi K r_1 r_2(\theta_2 - \theta_1)}{r_2 - r_1}

JEE MAIN 2021 · 26 AUG S2Calorimetry and specific heat capacityTRANSCRIBED

The temperature of equal masses of three different liquids xx, yy and zz are 10°C, 20°C and 30°C respectively. The temperature of mixture when xx is mixed with yy is 16°C and that when yy is mixed with zz is 26°C. The temperature of mixture when xx and zz are mixed will be:

  1. A

    25.62°C

  2. B

    20.28°C

  3. C

    28.32°C

  4. D

    23.84°C

JEE MAIN 2021 · 27 AUG S1Heat conduction and thermal resistanceTRANSCRIBED

A rod CDCD of thermal resistance 10.010.0 KW−1^{-1} is joined at the middle of an identical rod ABAB as shown in figure. The ends AA, BB and DD are maintained at 200°C, 100°C and 125°C respectively. The heat current in CDCD is _________ P W. The value of PP is _________.

Figure for JEE Main 2021 Physics question on Heat conduction and thermal resistance
JEE MAIN 2021 · 22 JUL S1Newton's law of coolingTRANSCRIBED

In 5 minutes, a body cools from 75 ∘^\circC to 65 ∘^\circC at room temperature of 25 ∘^\circC. The temperature of body at the end of next 5 minutes is ___ ∘^\circC.