RankRizz
JEE MAIN 2021 · 31 AUG S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2021 Physics question — Heat conduction and thermal resistance

Two thin metallic spherical shells of radii r1r_1 and r2r_2 (r1<r2r_1 < r_2) are placed with their centres coinciding. A material of thermal conductivity KK is filled in the space between the shells. The inner shell is maintained at temperature θ1\theta_1 and the outer shell at temperature θ2\theta_2 (θ1<θ2\theta_1 < \theta_2). The rate at which heat flows radially through the material is:

SOLUTION

We begin with the well-known Fourier law of heat conduction in its differential form. For any medium, the instantaneous heat current dQ/dtdQ/dt (which we shall denote simply by QQ for convenience) is related to the temperature gradient by

Q=−KA dθdr,Q = -K A\,\frac{d\theta}{dr},

where KK is the thermal conductivity of the material, AA is the area normal to the direction of flow and dθdr\dfrac{d\theta}{dr} is the spatial rate of fall of temperature. Because we are dealing with a spherical geometry, every point at a distance rr from the common centre lies on a sphere of area

A=4πr2.A = 4\pi r^{2}.

So, for purely radial (i.e. spherically symmetric) flow we can write

Q=−K(4πr2) dθdr  =  − 4πKr2 dθdr.Q = -K(4\pi r^{2})\,\frac{d\theta}{dr} \;=\; -\,4\pi K r^{2}\,\frac{d\theta}{dr}.

Under steady-state conditions the same quantity of heat per unit time must cross every spherical surface, hence QQ is independent of rr. We now isolate the derivative:

dθdr  =  − Q4πK 1r2.\frac{d\theta}{dr} \;=\; -\,\frac{Q}{4\pi K}\,\frac{1}{r^{2}}.

Next, we integrate this relation from the inner radius r1r_1 (at temperature θ1\theta_1) to the outer radius r2r_2 (at temperature θ2\theta_2). Writing the integral explicitly, we have

∫θ1θ2dθ  =  − Q4πK ∫r1r2drr2.\int_{\theta_1}^{\theta_2} d\theta \;=\; -\,\frac{Q}{4\pi K}\,\int_{r_1}^{r_2} \frac{dr}{r^{2}}.

The left-hand side integrates to

θ2−θ1.\theta_2 - \theta_1.

For the right-hand side, we use the elementary integral ∫r−2dr=− 1r\displaystyle\int r^{-2}dr = -\,\dfrac{1}{r}, giving

− Q4πK  [−1r]r1r2  =  − Q4πK  (−1r2+1r1)  =  − Q4πK  (1r1−1r2).-\,\frac{Q}{4\pi K}\;\Bigl[-\frac{1}{r}\Bigr]_{r_1}^{r_2} \;=\; -\,\frac{Q}{4\pi K}\;\Bigl(-\frac{1}{r_2}+\frac{1}{r_1}\Bigr) \;=\; -\,\frac{Q}{4\pi K}\;\Bigl(\frac{1}{r_1}-\frac{1}{r_2}\Bigr).

Equating both results, we obtain

θ2−θ1  =  − Q4πK  (1r1−1r2).\theta_2 - \theta_1 \;=\; -\,\frac{Q}{4\pi K}\;\Bigl(\frac{1}{r_1}-\frac{1}{r_2}\Bigr).

Since r1<r2r_1 < r_2, the bracketed term (1r1−1r2)\Bigl(\dfrac{1}{r_1}-\dfrac{1}{r_2}\Bigr) is positive. For clarity we take the magnitude of the heat current (the direction being implicitly from the hotter to the colder surface) and remove the minus sign:

Q  =  4πK (θ2−θ1) 11r1−1r2.Q \;=\; 4\pi K\,(\theta_2 - \theta_1)\,\frac{1}{\dfrac{1}{r_1}-\dfrac{1}{r_2}}.

Combining the fractions in the denominator,

1r1−1r2=r2−r1r1r2.\frac{1}{r_1}-\frac{1}{r_2} = \frac{r_2 - r_1}{r_1 r_2}.

Substituting this back, we obtain

Q=4πK (θ2−θ1) r1r2 r2−r1 .Q = 4\pi K\,(\theta_2 - \theta_1)\, \frac{r_1 r_2}{\,r_2 - r_1\,}.

Thus the rate at which heat flows radially through the material separating the two concentric spherical shells is

Q=4πK r1r2 (θ2−θ1) r2−r1 .Q = \frac{4\pi K\,r_1 r_2\,(\theta_2 - \theta_1)}{\,r_2 - r_1\,}.

This expression exactly matches Option D.

Hence, the correct answer is Option D.

Tagged Heat conduction and thermal resistance. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicHeat conduction and thermal resistance
TypeMultiple choice