RankRizz
JEE MAIN 2026 · 02 APR S1+4 / −1MEDIUMTRANSCRIBED

JEE Main 2026 Physics question — Errors in measurement and significant figures

The diameter of a wire measured by a screw gauge of least count 0.001 cm is 0.08 cm. The length measured by a scale of least count 0.1 cm is 150 cm. When a weight of 100 N is applied to the wire, the extension in length is 0.5 cm, measured by a micrometer of least count 0.001 cm. The error in the measured Young's modulus is α×109\alpha \times 10^9 N/m2^2. The value of α\alpha is __________ . (Ignore the contribution of the load to Young's modulus error calculation)

SOLUTION

For a uniform wire, Young’s modulus is defined as
Y=F LA ΔLY=\frac{F\,L}{A\,\Delta L}
where
  FF = applied force,
  LL = original length of the wire,
  ΔL\Delta L = extension in length, and
  AA = cross-sectional area =πd24=\dfrac{\pi d^{2}}{4}.

The measurements given are

Diameter   d=0.08 cm=0.0008 md = 0.08\ \text{cm}=0.0008\ \text{m}, least count 0.001 cm0.001\ \text{cm}
Length    L=150 cm=1.5 mL = 150\ \text{cm}=1.5\ \text{m}, least count 0.1 cm0.1\ \text{cm}
Extension ΔL=0.5 cm=0.005 m\Delta L = 0.5\ \text{cm}=0.005\ \text{m}, least count 0.001 cm0.001\ \text{cm}
Force       F=100 NF = 100\ \text{N} (taken to be exact as per question)

First calculate YY (all quantities in SI units):

Area,
A=πd24=π(0.0008)24=5.027×10−7 m2A=\frac{\pi d^{2}}{4}= \frac{\pi (0.0008)^{2}}{4}=5.027\times 10^{-7}\ \text{m}^{2}

Young’s modulus,
Y=100×1.55.027×10−7×0.005Y = \frac{100 \times 1.5}{5.027\times 10^{-7}\times 0.005} Y=5.97×1010 N m−2Y = 5.97\times 10^{10}\ \text{N m}^{-2}

The absolute instrumental errors (taken equal to the least count) are

Δd=0.001 cm=1×10−5 m\Delta d = 0.001\ \text{cm}=1\times 10^{-5}\ \text{m}
ΔL=0.1 cm=1×10−3 m\Delta L = 0.1\ \text{cm}=1\times 10^{-3}\ \text{m}
Δ(ΔL)=0.001 cm=1×10−5 m\Delta(\Delta L) = 0.001\ \text{cm}=1\times 10^{-5}\ \text{m}

Relative (fractional) errors:

Δdd=0.0010.08=0.0125\frac{\Delta d}{d}=\frac{0.001}{0.08}=0.0125
ΔLL=0.1150=6.67×10−4\frac{\Delta L}{L}=\frac{0.1}{150}=6.67\times 10^{-4}
Δ(ΔL)ΔL=0.0010.5=0.002\frac{\Delta(\Delta L)}{\Delta L}=\frac{0.001}{0.5}=0.002

The relation Y∝Ld2 ΔLY\propto \dfrac{L}{d^{2}\,\Delta L} gives, on differentiating,

ΔYY=ΔLL+2Δdd+Δ(ΔL)ΔL\frac{\Delta Y}{Y}= \frac{\Delta L}{L}+2\frac{\Delta d}{d}+\frac{\Delta(\Delta L)}{\Delta L}

Substituting the relative errors:

ΔYY=6.67×10−4+2(0.0125)+0.002\frac{\Delta Y}{Y}= 6.67\times 10^{-4}+2(0.0125)+0.002 ΔYY=0.000667+0.025+0.002\frac{\Delta Y}{Y}=0.000667+0.025+0.002 ΔYY=0.027667\frac{\Delta Y}{Y}=0.027667

Therefore the absolute error in YY is

ΔY=Y×0.027667=5.97×1010×0.027667\Delta Y = Y \times 0.027667 = 5.97\times 10^{10} \times 0.027667 ΔY≈1.65×109 N m−2\Delta Y \approx 1.65 \times 10^{9}\ \text{N m}^{-2}

Comparing with α×109 N m−2\alpha \times 10^{9}\ \text{N m}^{-2}, we get α=1.65\alpha = 1.65.

Hence, the correct choice is
Option B which is: 1.651.65

Tagged Errors in measurement and significant figures. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicErrors in measurement and significant figures
TypeMultiple choice