RankRizz

Units, Dimensions & Errors — JEE Main Previous Year Questions

Every Units, Dimensions & Errors question JEE Main has set from 2004–2026, grouped by the idea it tests rather than the order of the syllabus. 223 questions across 4 distinct ideas. Free to read, answer key on every one.

Questions

223

Distinct ideas

4

Share of marks

5.4%

Difficulty

EASY

The ideas inside Units, Dimensions & Errors

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Units, Dimensions & Errors questions actually test.

Every Units, Dimensions & Errors question

81–100 OF 223 · NEWEST FIRST

JEE MAIN 2024 · 08 APR S1Errors in measurement and significant figuresTRANSCRIBED

Young's modulus is determined by the equation given by Y=49000mldyncm2Y = 49000 \frac{m}{l} \frac{dyn}{cm^2} where MM is the mass and ll is the extension of wire used in the experiment. Now error in Young modulus (Y)(Y) is estimated by taking data from M−lM - l plot in graph paper. The smallest scale divisions are 5 g5 \text{ g} and 0.02 cm0.02 \text{ cm} along load axis and extension axis respectively. If the value of MM and ll are 500 g500 \text{ g} and 2 cm2 \text{ cm} respectively then percentage error of YY is :

  1. A

    0.5%0.5\%

  2. B

    2%2\%

  3. C

    0.02%0.02\%

  4. D

    0.2%0.2\%

JEE MAIN 2024 · 05 APR S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

If GG be the gravitational constant and uu be the energy density then which of the following quantity have the dimensions as that of the uG\sqrt{uG} :

  1. A

    pressure gradient per unit mass

  2. B

    Gravitational potential

  3. C

    Energy per unit mass

  4. D

    Force per unit mass

JEE MAIN 2024 · 31 JAN S2Errors in measurement and significant figuresTRANSCRIBED

The measured value of the length of a simple pendulum is 20 cm with 2 mm accuracy. The time for 50 oscillations was measured to be 40 seconds with 1 second resolution. From these measurements, the accuracy in the measurement of acceleration due to gravity is NN%. The value of NN is:

  1. A

    4

  2. B

    8

  3. C

    6

  4. D

    5

JEE MAIN 2023 · 24 JAN S1Dimensional formulae of physical quantitiesTRANSCRIBED

Match List I with List II.

Figure for JEE Main 2023 Physics question on Dimensional formulae of physical quantities
  1. A

    A - III, B - I, C - II, D - IV

  2. B

    A - III, B - IV, C - I, D - II

  3. C

    A - II, B - IV, C - III, D - I

  4. D

    A - I, B - III, C - IV, D - II

JEE MAIN 2023 · 31 JAN S1Dimensional formulae of physical quantitiesTRANSCRIBED

If RR, XLX_L and XCX_C represent resistance, inductive reactance and capacitive reactance. Then which of the following is dimensionless:

  1. A

    R  XL  XCR \; X_L \; X_C

  2. B

    RXLXC\dfrac{R}{\sqrt{X_L X_C}}

  3. C

    RXLXC\dfrac{R}{X_L X_C}

  4. D

    RXLXCR \dfrac{X_L}{X_C}

JEE MAIN 2023 · 01 FEB S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

If the velocity of light cc, universal gravitational constant GG and planck's constant hh are chosen as fundamental quantities. The dimensions of mass in the new system is:

  1. A

    [h12c12G1]\left[h^{\frac{1}{2}}c^{\frac{1}{2}}G^{1}\right]

  2. B

    h1c1G−1h^{1}c^{1}G^{-1}

  3. C

    [h−12c12G12]\left[h^{-\frac{1}{2}}c^{\frac{1}{2}}G^{\frac{1}{2}}\right]

  4. D

    [h12c12G−12]\left[h^{\frac{1}{2}}c^{\frac{1}{2}}G^{-\frac{1}{2}}\right]

JEE MAIN 2023 · 29 JAN S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

Match List I with List II:

List-I (Physical Quantity)List-II (Dimensional Formula)
A. Pressure gradientI. [M0L2T−2][M^0L^2T^{-2}]
B. Energy densityII. [M1L−1T−2][M^1L^{-1}T^{-2}]
C. Electric FieldIII. [M1L−2T−2][M^1L^{-2}T^{-2}]
D. Latent heatIV. [M1L1T−3A−1][M^1L^1T^{-3}A^{-1}]


Choose the correct answer from the options given below:

  1. A

    A-III, B-II, C-I, D-IV

  2. B

    A-II, B-III, C-IV, D-I

  3. C

    A-III, B-II, C-IV, D-I

  4. D

    A-II, B-III, C-I, D-IV

JEE MAIN 2023 · 13 APR S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

In the equation X+aY2[Y−b]=RTX + \frac{a}{Y^2}\left[Y - b\right] = RT, XX is pressure, YY is volume, RR is universal gas constant and TT is temperature. The physical quantity equivalent to the ratio ab\frac{a}{b} is:

  1. A

    Pressure gradient

  2. B

    Energy

  3. C

    Impulse

  4. D

    Coefficient of viscosity

JEE MAIN 2023 · 25 JAN S1Units: SI system, unit conversion and new systems of unitsTRANSCRIBED

Match List I with List II
List - I                        List - II
A. Surface tension       I. kg m−1^{-1} s−1^{-1}
B. Pressure                 II. kg m s−1^{-1}
C. Viscosity                III. kg m−1^{-1} s−2^{-2}
D. Impulse                  IV. kg s−2^{-2}
Choose the correct answer from the options given below:

  1. A

    A-IV, B-III, C-II, D-I

  2. B

    A-IV, B-III, C-I, D-II

  3. C

    A-III, B-IV, C-I, D-II

  4. D

    A-II, B-I, C-III, D-IV

JEE MAIN 2023 · 29 JAN S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

The equation of a circle is given by x2+y2=a2x^2 + y^2 = a^2, where aa is the radius. If the equation is modified to change the origin other than (0,0)(0, 0), then find out the correct dimensions of AA and BB in a new equation: (x−At)2+(y−tB)2=a2(x - At)^2 + (y - \frac{t}{B})^2 = a^2
The dimensions of tt is given as [T−1][T^{-1}]

  1. A

    A=[L−1T],B=[LT−1]A = [L^{-1}T], B = [LT^{-1}]

  2. B

    A=[LT],B=[L−1T−1]A = [LT], B = [L^{-1}T^{-1}]

  3. C

    A=[L−1T−1],B=[LT−1]A = [L^{-1}T^{-1}], B = [LT^{-1}]

  4. D

    A=[L−1T−1],B=[LT]A = [L^{-1}T^{-1}], B = [LT]

JEE MAIN 2023 · 06 APR S1Errors in measurement and significant figuresTRANSCRIBED

Two resistances are given as R1=(10±0.5)R_1 = (10 \pm 0.5) Ω\Omega and R2=(15±0.5)R_2 = (15 \pm 0.5) Ω\Omega. The percentage error in the measurement of equivalent resistance when they are connected in parallel is

  1. A

    6.33

  2. B

    2.33

  3. C

    5.33

  4. D

    4.33

JEE MAIN 2023 · 25 JAN S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

Match List I with List II
         List I                                    List II
A. Young's Modulus (Y)                   I. [ML−1^{-1}T−1^{-1}]
B. Co-efficient of Viscosity (η\eta)      II. [ML2^2T−1^{-1}]
C. Planck's Constant (h)                III. [ML−1^{-1}T−2^{-2}]
D. Work Function (ϕ\phi)                      IV. [ML2^2T−2^{-2}]

  1. A

    A-II, B-III, C-IV, D-I

  2. B

    A-III, B-I, C-II, D-IV

  3. C

    A-I, B-III, C-IV, D-II

  4. D

    A-I, B-II, C-III, D-IV

JEE MAIN 2023 · 30 JAN S1Units: SI system, unit conversion and new systems of unitsTRANSCRIBED

Electric field in a certain region is given by E⃗=Ax2i^+By3j^\vec{E} = \frac{A}{x^2}\hat{i} + \frac{B}{y^3}\hat{j}. The SI unit of AA and BB are:

  1. A

    N m3^3 C−1^{-1}; N m2^2 C−1^{-1}

  2. B

    N m2^2 C−1^{-1}; N m3^3 C−1^{-1}

  3. C

    N m3^3 C; N m2^2 C

  4. D

    N m2^2 C; N m3^3 C

JEE MAIN 2023 · 08 APR S2Units: SI system, unit conversion and new systems of unitsTRANSCRIBED

Match List I with List II

List IList II
A.TorqueI.ML−2T−2M L^{-2} T^{-2}
B.StressII.ML2T−2M L^2 T^{-2}
C.Pressure gradientIII.ML−1T−1M L^{-1} T^{-1}
D.Coefficient of viscosityIV.ML−1T−2M L^{-1} T^{-2}


Choose the correct answer from the options given below:

  1. A

    A-II, B-I, C-IV, D-III

  2. B

    A-IV, B-II, C-III, D-I

  3. C

    A-II, B-IV, C-I, D-III

  4. D

    A-III, B-IV, C-I, D-II

JEE MAIN 2023 · 01 FEB S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

P+aV2(V−b)=RTP + \frac{a}{V^2}(V - b) = RT represents the equation of state of some gases. Where PP is the pressure, VV is the volume, TT is the temperature and a,b,Ra, b, R are the constants. The physical quantity, which has dimensional formula as that of b2a\frac{b^2}{a}, will be:

  1. A

    Bulk modulus

  2. B

    Modulus of rigidity

  3. C

    Compressibility

  4. D

    Energy density

JEE MAIN 2023 · 10 APR S1Errors in measurement and significant figuresTRANSCRIBED

A physical quantity PP is given as P=a2b3cdP = \frac{a^2 b^3}{c\sqrt{d}}. The percentage error in the measurement of aa, bb, cc and dd are 1%, 2%, 3% and 4% respectively. The percentage error in the measurement of quantity PP will be

  1. A

    13%

  2. B

    16%

  3. C

    12%

  4. D

    14%

JEE MAIN 2023 · 30 JAN S2Units: SI system, unit conversion and new systems of unitsTRANSCRIBED

Match List I with List II

List IList II
A. TorqueI. kg m−1^{-1} s−2^{-2}
B. Energy densityII. kg m s−1^{-1}
C. Pressure gradientIII. kg m−2^{-2} s−2^{-2}
D. ImpulseIV. kg m2^2 s−2^{-2}

Choose the correct answer from the options given below:
  1. A

    A-IV, B-III, C-I, D-II

  2. B

    A-I, B-IV, C-III, D-II

  3. C

    A-IV, B-I, C-II, D-III

  4. D

    A-IV, B-I, C-III, D-II

JEE MAIN 2023 · 08 APR S1Errors in measurement and significant figuresTRANSCRIBED

A cylindrical wire of mass (0.4±0.01)(0.4 \pm 0.01) g has length (8±0.04)(8 \pm 0.04) cm and radius (6±0.03)(6 \pm 0.03) mm. The maximum error in its density will be

  1. A

    3.5%

  2. B

    5%

  3. C

    1%

  4. D

    4%

JEE MAIN 2023 · 11 APR S1Units: SI system, unit conversion and new systems of unitsTRANSCRIBED

Given below are two statements:
Statement I: Astronomical unit (Au), Parsec (Pc) and Light year (ly) are units for measuring astronomical distances.
Statement II: Au < Parsec (Pc) < ly
In the light of the above statements, choose the most appropriate answer from the options given below:

  1. A

    Both Statements I and Statements II are incorrect

  2. B

    Statements I is correct but Statements II is incorrect

  3. C

    Both Statements I and Statements II are correct

  4. D

    Statements I is incorrect but Statements II is correct

JEE MAIN 2023 · 12 APR S1Units: SI system, unit conversion and new systems of unitsTRANSCRIBED

Match List I with List II

List-IList-II
ASpring constantI[T−1][T^{-1}]
BAngular speedII[MT−2][MT^{-2}]
CAngular momentumIII[ML2][ML^2]
DMoment of InertiaIV[ML2T−1][ML^2T^{-1}]

Choose the correct answer from the options given below:
  1. A

    A-I, B-III, C-II, D-IV

  2. B

    A-IV, B-I, C-III, D-II

  3. C

    A-II, B-I, C-IV, D-III

  4. D

    A-II, B-III, C-I, D-IV