RankRizz

Units, Dimensions & Errors — JEE Main Previous Year Questions

Every Units, Dimensions & Errors question JEE Main has set from 2004–2026, grouped by the idea it tests rather than the order of the syllabus. 223 questions across 4 distinct ideas. Free to read, answer key on every one.

Questions

223

Distinct ideas

4

Share of marks

5.4%

Difficulty

EASY

The ideas inside Units, Dimensions & Errors

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Units, Dimensions & Errors questions actually test.

Every Units, Dimensions & Errors question

101–120 OF 223 · NEWEST FIRST

JEE MAIN 2023 · 24 JAN S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

The frequency (ν\nu) of an oscillating liquid drop may depend upon radius (rr) of the drop, density (ρ\rho) of liquid and the surface tension (ss) of the liquid as: ν=raρbsc\nu = r^a \rho^b s^c. The values of aa, bb and cc respectively are

  1. A

    (−32,−12,12)\left(-\frac{3}{2}, -\frac{1}{2}, \frac{1}{2}\right)

  2. B

    (−32,12,12)\left(-\frac{3}{2}, \frac{1}{2}, \frac{1}{2}\right)

  3. C

    (32,12,−12)\left(\frac{3}{2}, \frac{1}{2}, -\frac{1}{2}\right)

  4. D

    (32,−12,12)\left(\frac{3}{2}, -\frac{1}{2}, \frac{1}{2}\right)

JEE MAIN 2023 · 31 JAN S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

Match List I with List II
List I                                    List II
A. Angular momentum     I. [ML2^2T−2^{-2}]
B. Torque                         II. [ML−2^{-2}T−2^{-2}]
C. Stress                          III. [ML2^2T−1^{-1}]
D. Pressure gradient      IV. [ML−1^{-1}T−2^{-2}]
Choose the correct answer from the options given below:

  1. A

    A-I, B-IV, C-III, D-II

  2. B

    A-III, B-I, C-IV, D-II

  3. C

    A-II, B-III, C-IV, D-I

  4. D

    A-IV, B-II, C-I, D-III

JEE MAIN 2023 · 15 APR S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

The speed of a wave produced in water is given by v=λagbρcv = \lambda^a g^b \rho^c. Where λ\lambda, gg and ρ\rho are wavelength of wave, acceleration due to gravity and density of water respectively. The values of aa, bb and cc respectively, are

  1. A

    1,−1,01, -1, 0

  2. B

    12,0,12\frac{1}{2}, 0, \frac{1}{2}

  3. C

    1,1,01, 1, 0

  4. D

    12,12,0\frac{1}{2}, \frac{1}{2}, 0

JEE MAIN 2023 · 11 APR S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

If force (F), velocity (V) and time (T) are considered as fundamental physical quantity, then dimensional formula of density will be:

  1. A

    FV4T−6FV^4T^{-6}

  2. B

    FV−4T−2FV^{-4}T^{-2}

  3. C

    F2V−2T6F^2V^{-2}T^6

  4. D

    FV−2T2FV^{-2}T^2

JEE MAIN 2023 · 08 APR S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

Dimension of 1μ0ε0\dfrac{1}{\mu_0 \varepsilon_0} should be equal to

  1. A

    L T−1^{-1}

  2. B

    T2^2 L−2^{-2}

  3. C

    L2^2 T−2^{-2}

  4. D

    T L−1^{-1}

JEE MAIN 2023 · 13 APR S1Errors in measurement and significant figuresTRANSCRIBED

A body of mass (5±0.5)(5 \pm 0.5) kg is moving with a velocity of (20±0.4)(20 \pm 0.4) m s−1^{-1}. Its kinetic energy will be

  1. A

    (1000±0.14)(1000 \pm 0.14) J

  2. B

    (500±0.14)(500 \pm 0.14) J

  3. C

    (500±140)(500 \pm 140) J

  4. D

    (1000±140)(1000 \pm 140) J

JEE MAIN 2023 · 06 APR S2Errors in measurement and significant figuresTRANSCRIBED

A 2 meter long scale with least count of 0.2 cm is used to measure the locations of objects on an optical bench. While measuring the focal length of a convex lens, the object pin and the convex lens are placed at 80 cm mark and 1 m mark, respectively. The image of the object pin on the other side of lens coincides with image pin that is kept at 180 cm mark. The % error in the estimation of focal length is:

  1. A

    0.85

  2. B

    1.70

  3. C

    1.02

  4. D

    0.51

JEE MAIN 2023 · 30 JAN S1Errors in measurement and significant figuresTRANSCRIBED

In an experiment for estimating the value of focal length of converging mirror, image of an object placed at 4040 cm from the pole of the mirror is formed at distance 120120 cm from the pole of the mirror. These distances are measured with a modified scale in which there are 20 small divisions in 11 cm. The value of error in measurement of focal length of the mirror is 1K\frac{1}{K} cm. The value of KK is ______.

JEE MAIN 2022 · 24 JUN S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

Identify the pair of physical quantities which have different dimensions:

  1. A

    Wave number and Rydberg's constant

  2. B

    Stress and Coefficient of elasticity

  3. C

    Coercivity and Magnetisation

  4. D

    Specific heat capacity and Latent heat

JEE MAIN 2022 · 24 JUN S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

Identify the pair of physical quantities that have same dimensions:

  1. A

    Velocity gradient and decay constant

  2. B

    Angular frequency and angular momentum

  3. C

    Wave number and Avogadro number

  4. D

    Wein's constant and Stephan's constant

JEE MAIN 2022 · 25 JUN S1Errors in measurement and significant figuresTRANSCRIBED

If Z=A2B3C4Z = \frac{A^2 B^3}{C^4}, then the relative error in ZZ will be

  1. A

    2ΔAA+3ΔBB+4ΔCC\frac{2\Delta A}{A} + \frac{3\Delta B}{B} + \frac{4\Delta C}{C}

  2. B

    ΔAA+ΔBB+ΔCC\frac{\Delta A}{A} + \frac{\Delta B}{B} + \frac{\Delta C}{C}

  3. C

    2ΔAA+3ΔBB−4ΔCC\frac{2\Delta A}{A} + \frac{3\Delta B}{B} - \frac{4\Delta C}{C}

  4. D

    ΔAA+ΔBB−ΔCC\frac{\Delta A}{A} + \frac{\Delta B}{B} - \frac{\Delta C}{C}

JEE MAIN 2022 · 26 JUN S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

An expression for a dimensionless quantity PP is given by P=αβlog⁡e(kTβx)P = \frac{\alpha}{\beta} \log_e\left(\frac{kT}{\beta x}\right); where α\alpha and β\beta are constants, xx is distance; kk is Boltzmann constant and TT is the temperature. Then the dimensions of α\alpha will be

  1. A

    [M0L−1T0][M^0 L^{-1} T^0]

  2. B

    [ML0T−2][ML^0 T^{-2}]

  3. C

    [MLT−2][MLT^{-2}]

  4. D

    [ML2T−2][ML^2 T^{-2}]

JEE MAIN 2022 · 26 JUN S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

The dimension of mutual inductance is

  1. A

    ML2T−2A−1ML^2T^{-2}A^{-1}

  2. B

    ML2T−2A−2ML^2T^{-2}A^{-2}

  3. C

    ML2T−3A−1ML^2T^{-3}A^{-1}

  4. D

    ML2T−3A−2ML^2T^{-3}A^{-2}

JEE MAIN 2022 · 27 JUN S1Errors in measurement and significant figuresTRANSCRIBED

A silver wire has a mass (0.6±0.006)(0.6 \pm 0.006) g, radius (0.5±0.005)(0.5 \pm 0.005) mm and length (4±0.04)(4 \pm 0.04) cm. The maximum percentage error in the measurement of its density will be

  1. A

    7%7\%

  2. B

    3%3\%

  3. C

    4%4\%

  4. D

    6%6\%

JEE MAIN 2022 · 27 JUN S2Units: SI system, unit conversion and new systems of unitsTRANSCRIBED

The distance of the Sun from earth is 1.5×10111.5 \times 10^{11} m and its angular diameter is 2000′′2000'' when observed from the earth. The diameter of the Sun will be

  1. A

    2.45×10102.45 \times 10^{10} m

  2. B

    1.45×10101.45 \times 10^{10} m

  3. C

    1.45×1091.45 \times 10^{9} m

  4. D

    0.14×1090.14 \times 10^{9} m

JEE MAIN 2022 · 28 JUN S2Units: SI system, unit conversion and new systems of unitsTRANSCRIBED

Velocity (vv) and acceleration (aa) in two systems of units 1 and 2 are related as v2=nm2v1v_2 = \frac{n}{m^2} v_1 and a2=a1mna_2 = \frac{a_1}{mn} respectively. Here mm and nn are constants. The relations for distance and time in two systems respectively are

  1. A

    n3m3L1=L2\frac{n^3}{m^3} L_1 = L_2 and n2mT1=T2\frac{n^2}{m} T_1 = T_2

  2. B

    L1=n4m2L2L_1 = \frac{n^4}{m^2} L_2 and T1=n2mT2T_1 = \frac{n^2}{m} T_2

  3. C

    L1=n2mL2L_1 = \frac{n^2}{m} L_2 and T1=n4m2T2T_1 = \frac{n^4}{m^2} T_2

  4. D

    n2mL1=L2\frac{n^2}{m} L_1 = L_2 and n2m2T1=T2\frac{n^2}{m^2} T_1 = T_2

JEE MAIN 2022 · 25 JUL S2Errors in measurement and significant figuresTRANSCRIBED

The maximum error in the measurement of resistance, current and time for which current flows in an electrical circuit are 1%1\%, 2%2\% and 3%3\% respectively. The maximum percentage error in the detection of the dissipated heat will be:

  1. A

    22

  2. B

    44

  3. C

    66

  4. D

    88

JEE MAIN 2022 · 27 JUL S1Errors in measurement and significant figuresTRANSCRIBED

A torque meter is calibrated to reference standards of mass, length and time each with 5%5\% accuracy. After calibration, the measured torque with this torque meter will have net accuracy of

  1. A

    15%15\%

  2. B

    25%25\%

  3. C

    75%75\%

  4. D

    5%5\%

JEE MAIN 2022 · 27 JUL S2Dimensional analysis: deriving and checking relationsTRANSCRIBED

An expression of energy density is given by u=αβsin⁡(αxkt)u = \alpha \beta \sin\left(\frac{\alpha x}{kt}\right), where α,β\alpha, \beta are constants, xx is displacement, kk is Boltzmann constant and tt is the temperature. The dimensions of β\beta will be

  1. A

    [ML2T−2θ−1][ML^2T^{-2}\theta^{-1}]

  2. B

    [M0L2T−2][M^0L^2T^{-2}]

  3. C

    [M0L0T0][M^0L^0T^0]

  4. D

    [M0L−2T0][M^0L^-2T^0]

JEE MAIN 2022 · 28 JUL S1Dimensional analysis: deriving and checking relationsTRANSCRIBED

The dimensions of B2μ0\frac{B^2}{\mu_0} will be (if μ0\mu_0: permeability of free space and BB: magnetic field)

  1. A

    [ML2T−2][ML^2T^{-2}]

  2. B

    [MLT−2][MLT^{-2}]

  3. C

    [ML−1T−2][ML^{-1}T^{-2}]

  4. D

    [MLL−2A−1][MLL^{-2}A^{-1}]