RankRizz
JEE MAIN 2026 · 04 APR S2+4 / −1EASYTRANSCRIBED

JEE Main 2026 Physics question — Zener diode, LED, photodiode and solar cell

A diode has Zener voltage of 10 V and maximum power dissipation of 0.5 W, then the minimum resistance to be used in series with this diode for safety when it is connected to a 25 V power supply is ______ Ω\Omega.

SOLUTION

The Zener diode will operate in its breakdown (regulating) region when the voltage across it is VZ=10 VV_Z = 10\text{ V}.

Its maximum power dissipation is Pmax=0.5 WP_{\text{max}} = 0.5\text{ W}.
Using the power formula P=VIP = VI, the maximum permissible current through the Zener is

IZ(max)=PmaxVZ=0.5 W10 V=0.05 A=50 mA.I_{\text{Z(max)}} = \frac{P_{\text{max}}}{V_Z} = \frac{0.5\text{ W}}{10\text{ V}} = 0.05\text{ A} = 50\text{ mA}.

The supply voltage is VS=25 VV_S = 25\text{ V}. A series resistor RSR_S is placed so that, at the worst case (no external load, all current through the Zener), the current does not exceed IZ(max)I_{\text{Z(max)}}.

Applying Kirchhoff’s Voltage Law:

VS=IZ RS+VZ.V_S = I_{\text{Z}}\,R_S + V_Z.

At the limiting condition, IZ=IZ(max)I_{\text{Z}} = I_{\text{Z(max)}}. Hence

RS=VS−VZIZ(max)=25 V−10 V0.05 A=15 V0.05 A=300 Ω.R_S = \frac{V_S - V_Z}{I_{\text{Z(max)}}} = \frac{25\text{ V} - 10\text{ V}}{0.05\text{ A}} = \frac{15\text{ V}}{0.05\text{ A}} = 300\ \Omega.

Therefore, the minimum series resistance required is 300 Ω.

Tagged Zener diode, LED, photodiode and solar cell. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicZener diode, LED, photodiode and solar cell
TypeNumerical answer