RankRizz
JEE MAIN 2026 · 06 APR S1+4 / −1MEDIUMTRANSCRIBED

JEE Main 2026 Physics question — Zener diode, LED, photodiode and solar cell

The maximum rated power of the LED is 2 mW and it is used in the circuit with input voltage of 5 V as shown in the figure below. The current through resistance RSR_S is 0.5 mA.
The minimum value of the resistance of RSR_S, to ensure that the LED is not damaged is _______ kΩ\Omega.

Figure for JEE Main 2026 Physics question on Zener diode, LED, photodiode and solar cell
SOLUTION

The Middle Diode: It points upwards against the 5 V5\text{ V} downward current flow. It is reverse-biased (acts as an open circuit, carrying 0 mA0\text{ mA}).

The LED: It points downwards with the current flow. It is forward-biased and carries the entire current from RSR_S.

    Therefore, ILED=IS=0.5 mA\text{Therefore, } I_{\text{LED}} = I_S = 0.5\text{ mA}

    VLED=PLEDILED=2 mW0.5 mA=4 VV_{\text{LED}} = \frac{P_{\text{LED}}}{I_{\text{LED}}} = \frac{2\text{ mW}}{0.5\text{ mA}} = 4\text{ V}

    Vin=VRS+VLEDV_{\text{in}} = V_{R_S} + V_{\text{LED}}

    5 V=(IS⋅RS)+4 V5\text{ V} = (I_S \cdot R_S) + 4\text{ V}

    1 V=0.5 mA×RS1\text{ V} = 0.5\text{ mA} \times R_S

    RS=1 V0.5×10−3 A=2000 Ω=2 kΩR_S = \frac{1\text{ V}}{0.5 \times 10^{-3}\text{ A}} = 2000\ \Omega = 2\ \text{k}\Omega

    Tagged Zener diode, LED, photodiode and solar cell. Machine-assigned, so read it as a strong shortlist rather than a verdict.

    SubjectPhysics
    TopicZener diode, LED, photodiode and solar cell
    TypeMultiple choice