RankRizz

Stress, strain, Hooke's law and Young's modulus — JEE Main Previous Year Questions

Every JEE Main question on Stress, strain, Hooke's law and Young's modulus, one of the ideas inside Mechanical Properties of Solids: 70 questions from 2006–2026, 46 of them in the last five years. Newest first, answer key on every one. Free to read.

Questions

70

Years asked

14

Since

2006

Of the chapter

56%

Every Stress, strain, Hooke's law and Young's modulus question

41–60 OF 70 · NEWEST FIRST

JEE MAIN 2022 · 26 JUN S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The elongation of a wire on the surface of the earth is 10−410^{-4} m. The same wire of same dimensions is elongated by 6×10−56 \times 10^{-5} m on another planet. The acceleration due to gravity on the planet will be ______ m s−2^{-2}. (Take acceleration due to gravity on the surface of earth =10= 10 m s−2^{-2})

JEE MAIN 2022 · 25 JUL S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A wire of length LL and radius rr is clamped rigidly at one end. When the other end of the wire is pulled by a force FF, its length increases by 5 cm5 \text{ cm}. Another wire of the same material of length 4L4L and radius 4r4r is pulled by a force 4F4F under same conditions. The increase in length of this wire is ______ cm.

JEE MAIN 2022 · 26 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A uniform heavy rod of mass 20 kg20 \text{ kg}, cross sectional area 0.4 m20.4 \text{ m}^2 and length 20 m20 \text{ m} is hanging from a fixed support. Neglecting the lateral contraction, the elongation in the rod due to its own weight is x×10−9 mx \times 10^{-9} \text{ m}. The value of xx is ______. (Given: Young's modulus Y=2×1011 N m−2Y = 2 \times 10^{11} \text{ N m}^{-2} and g=10 m s−2g = 10 \text{ m s}^{-2})

JEE MAIN 2022 · 27 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

In an experiment to determine the Young's modulus, steel wires of five different lengths (1, 2, 3, 4 and 5 m) but of same cross-section area (2 mm2)(2 \ mm^2) were taken and the curves between extension and load were obtained. The slope (extension/load) of the curves were plotted with the wire length and the following graph was obtained. If the Young's modulus of the given steel wire is x×1011 Nm−2x \times 10^{11} \ N m^{-2}, then the value of xx is _____

Figure for JEE Main 2022 Physics question on Stress, strain, Hooke's law and Young's modulus
JEE MAIN 2022 · 28 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A string of area of cross-section 4 mm2^2 and length 0.5 is connected with a rigid body of mass 2 kg. The body is rotated in a vertical circular path of radius 0.5 m. The body acquires a speed of 5 m s−1^{-1} at the bottom of the circular path. Strain produced in the string when the body is at the bottom of the circle is _____ ×10−5\times 10^{-5}. (Use Young's modulus 101110^{11} N m−2^{-2} and g=10 ms−2g = 10 \ m s^{-2})

JEE MAIN 2022 · 29 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The speed of a transverse wave passing through a string of length 50 cm and mass 10 g is 60 m s−1^{-1}. The area of cross-section of the wire is 2.0 mm2^2 and its Young's modulus is 1.2×10111.2 \times 10^{11} N m−2^{-2}. The extension of the wire over its natural length due to its tension will be x×10−5x \times 10^{-5} m. The value of x is _____

JEE MAIN 2021 · 20 JUL S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The value of tension in a long thin metal wire has been changed from T1T_1 to T2T_2. The lengths of the metal wire at two different values of tension T1T_1 and T2T_2 are ℓ1\ell_1 and ℓ2\ell_2, respectively. The actual length of the metal wire is:

  1. A

    T1ℓ2−T2ℓ1T1−T2\frac{T_1\ell_2 - T_2\ell_1}{T_1 - T_2}

  2. B

    T1ℓ1−T2ℓ2T1−T2\frac{T_1\ell_1 - T_2\ell_2}{T_1 - T_2}

  3. C

    ℓ1+ℓ22\frac{\ell_1 + \ell_2}{2}

  4. D

    T1T2ℓ1ℓ2\sqrt{T_1 T_2 \ell_1 \ell_2}

JEE MAIN 2021 · 25 JUL S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Two wires of same length and radius are joined end to end and loaded. The Young's moduli of the materials of the two wires are Y1Y_1 and Y2Y_2. The combination behaves as a single wire then its Young's modulus is:

  1. A

    Y=2Y1Y23Y1+Y2Y = \frac{2Y_1Y_2}{3Y_1 + Y_2}

  2. B

    Y=2Y1Y2Y1+Y2Y = \frac{2Y_1Y_2}{Y_1 + Y_2}

  3. C

    Y=Y1Y22Y1+Y2Y = \frac{Y_1Y_2}{2Y_1 + Y_2}

  4. D

    Y=Y1Y2Y1+Y2Y = \frac{Y_1Y_2}{Y_1 + Y_2}

JEE MAIN 2021 · 31 AUG S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A uniform heavy rod of weight 10 kg m s−2^{-2}, cross-sectional area 100 cm2^2 and length 20 cm is hanging from a fixed support. Young modulus of the material of the rod is 2×10112 \times 10^{11} N m−2^{-2}. Neglecting the lateral contraction, find the elongation of rod due to its own weight:

  1. A

    5×10−105 \times 10^{-10} m

  2. B

    4×10−84 \times 10^{-8} m

  3. C

    5×10−85 \times 10^{-8} m

  4. D

    2×10−92 \times 10^{-9} m

JEE MAIN 2021 · 31 AUG S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Four identical hollow cylindrical columns of mild steel support a big structure of mass 50×10350 \times 10^3 kg. The inner and outer radii of each column are 50 cm and 100 cm respectively. Assuming uniform local distribution, calculate the compression strain of each column.
[use Y=2.0×1011Y = 2.0 \times 10^{11} Pa, g=9.8g = 9.8 m s−2^{-2}]

  1. A

    1.87×10−31.87 \times 10^{-3}

  2. B

    2.60×10−72.60 \times 10^{-7}

  3. C

    3.60×10−83.60 \times 10^{-8}

  4. D

    7.07×10−47.07 \times 10^{-4}

JEE MAIN 2021 · 26 AUG S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Two blocks of masses 3 kg and 5 kg are connected by a metal wire going over a smooth pulley. The breaking stress of the metal is 24π×102\frac{24}{\pi} \times 10^2 N m−2^{-2}. What is the minimum radius of the wire?

Figure for JEE Main 2021 Physics question on Stress, strain, Hooke's law and Young's modulus


(take g = 10 m s−2^{-2})

  1. A

    1250 cm

  2. B

    1.25 cm

  3. C

    125 cm

  4. D

    12.5 cm

JEE MAIN 2021 · 26 FEB S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The length of metallic wire is l1l_1 when tension in it is T1T_1. It is l2l_2 when the tension is T2T_2. The original length of the wire will be:

  1. A

    T2l1+T1l2T1+T2\frac{T_2 l_1 + T_1 l_2}{T_1 + T_2}

  2. B

    l1+l22\frac{l_1 + l_2}{2}

  3. C

    T2l1−T1l2T2−T1\frac{T_2 l_1 - T_1 l_2}{T_2 - T_1}

  4. D

    T1l1−T2l2T2−T1\frac{T_1 l_1 - T_2 l_2}{T_2 - T_1}

JEE MAIN 2021 · 20 JUL S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The length of a metal wire is ℓ1\ell_1, when the tension in it is T1T_1 and is ℓ2\ell_2 when the tension is T2T_2. The natural length of the wire is:

  1. A

    ℓ1ℓ2\sqrt{\ell_1 \ell_2}

  2. B

    ℓ1T2−ℓ2T1T2−T1\frac{\ell_1 T_2 - \ell_2 T_1}{T_2 - T_1}

  3. C

    ℓ1T2+ℓ2T1T2+T1\frac{\ell_1 T_2 + \ell_2 T_1}{T_2 + T_1}

  4. D

    ℓ1+ℓ22\frac{\ell_1 + \ell_2}{2}

JEE MAIN 2021 · 27 AUG S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Wires W1W_1 and W2W_2 are made of same material having the breaking stress of 1.25×1091.25 \times 10^9 N m−2^{-2}. W1W_1 and W2W_2 have cross-sectional area of 8×10−78 \times 10^{-7} m2^2 and 4×10−74 \times 10^{-7} m2^2, respectively. Masses of 20 kg and 10 kg hang from them as shown in the figure. The maximum mass that can be placed in the pan without breaking the wires is _________ kg (Use g = 10 m s−2^{-2})

Figure for JEE Main 2021 Physics question on Stress, strain, Hooke's law and Young's modulus
JEE MAIN 2021 · 24 FEB S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A uniform metallic wire is elongated by 0.04 m when subjected to a linear force FF. The elongation, if its length and diameter is doubled and subjected to the same force will be ______ cm.

JEE MAIN 2020 · 06 SEP S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

An object of mass mm is suspended at the end of a massless wire of length LL and area of cross-section, A. Young modulus of the material of the wire is YY. If the mass is pulled down slightly its frequency of oscillation along the vertical direction is:

  1. A

    f=12πmLYAf = \frac{1}{2\pi}\sqrt{\frac{mL}{YA}}

  2. B

    f=12πYAmLf = \frac{1}{2\pi}\sqrt{\frac{YA}{mL}}

  3. C

    f=12πmAYLf = \frac{1}{2\pi}\sqrt{\frac{mA}{YL}}

  4. D

    f=12πYLmAf = \frac{1}{2\pi}\sqrt{\frac{YL}{mA}}

JEE MAIN 2020 · 09 JAN S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A body of mass m=10m = 10 kg is attached to one end of a wire of length 0.30.3 m. What is the maximum angular speed (in rad s−1s^{-1}) with which it can be rotated about its other end in a space station without breaking the wire?
[Breaking stress of wire (σ)=4.8×107(\sigma) = 4.8 \times 10^7 N m−2m^{-2} and area of cross-section of the wire =10−2= 10^{-2} cm2cm^2]

JEE MAIN 2019 · 08 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A steel wire having a radius of 2.0 mm, carrying a load of 4 kg, is hanging from a ceiling. Given that g = 3.1π\pi m s−2^{-2}, what will be the tensile stress that would be developed in the wire?

  1. A

    5.2×1065.2 \times 10^{6} N m−2^{-2}

  2. B

    6.2×1066.2 \times 10^{6} N m−2^{-2}

  3. C

    4.8×1064.8 \times 10^{6} N m−2^{-2}

  4. D

    3.1×1063.1 \times 10^{6} N m−2^{-2}

JEE MAIN 2019 · 10 APR S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The elastic limit of brass is 379 MPa. The minimum diameter of a brass rod if it is to support a 400 N load without exceeding its elastic limit will be

  1. A

    1.00 mm

  2. B

    1.36 mm

  3. C

    1.16 mm

  4. D

    0.90 mm

JEE MAIN 2019 · 08 APR S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Young's moduli of two wires A and B are in the ratio 7:4. Wire A is 2 m long and has radius R. Wire B is 1.5 m long and has radius 2 mm. If the two wires stretch by the same length for a given load, the value of R is close to:

  1. A

    1.3 mm

  2. B

    1.9 mm

  3. C

    1.5 mm

  4. D

    1.7 mm