RankRizz
JEE MAIN 2019 · 10 APR S2+4 / −1EASYTRANSCRIBED

JEE Main 2019 Physics question — Stress, strain, Hooke's law and Young's modulus

The elastic limit of brass is 379 MPa. The minimum diameter of a brass rod if it is to support a 400 N load without exceeding its elastic limit will be

SOLUTION

First, recall the definition of normal stress. We have the basic formula

σ=FA\sigma=\frac{F}{A}

where σ\sigma is the normal stress, FF is the axial load, and AA is the cross-sectional area on which the load acts.

The rod is circular, so its cross-sectional area is given by

A=πd24,A=\frac{\pi d^{2}}{4},

where dd is the diameter.

The material is brass with an elastic (safe) stress limit of σallow=379  MPa\sigma_{\text{allow}}=379\;\text{MPa}. Since 1  MPa=1  N/mm21\;\text{MPa}=1\;\text{N/mm}^2, we can write

σallow=379  N/mm2.\sigma_{\text{allow}} = 379\;\text{N/mm}^2.

The allowable stress must not be exceeded, so we set

σ≤σallow.\sigma \le \sigma_{\text{allow}}.

For the minimum diameter, we make the working stress exactly equal to the allowable value:

FA=σallow.\frac{F}{A}= \sigma_{\text{allow}}.

The load is F=400  NF = 400\;\text{N}, hence

400A=379⟹A=400379  mm2.\frac{400}{A}=379 \quad\Longrightarrow\quad A=\frac{400}{379}\;\text{mm}^2.

Carrying out the division gives

A≈1.055  mm2.A\approx 1.055\;\text{mm}^2.

Next, substitute this area into the circular area formula to get the diameter:

A=πd24⟹d2=4Aπ.A=\frac{\pi d^{2}}{4}\quad\Longrightarrow\quad d^{2}= \frac{4A}{\pi}.

Replacing AA by 1.055  mm21.055\;\text{mm}^2 gives

d2=4×1.055π.d^{2}= \frac{4\times 1.055}{\pi}.

First compute the numerator:

4×1.055=4.220.4\times 1.055 = 4.220.

Now divide by π\pi:

4.220π≈4.2203.1416≈1.343.\frac{4.220}{\pi}\approx \frac{4.220}{3.1416}\approx 1.343.

Taking the square root yields

d=1.343  mm≈1.159  mm.d = \sqrt{1.343}\;\text{mm}\approx 1.159\;\text{mm}.

Rounding to three significant figures, we obtain

d≈1.16  mm.d\approx 1.16\;\text{mm}.

Hence, the correct answer is Option C.

Tagged Stress, strain, Hooke's law and Young's modulus. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicStress, strain, Hooke's law and Young's modulus
TypeMultiple choice