RankRizz

Errors in measurement and significant figures — JEE Main Previous Year Questions

Every JEE Main question on Errors in measurement and significant figures, one of the ideas inside Units, Dimensions & Errors: 75 questions from 2008–2026, 42 of them in the last five years. Newest first, answer key on every one. Free to read.

Questions

75

Years asked

16

Since

2008

Of the chapter

34%

Every Errors in measurement and significant figures question

61–75 OF 75 · NEWEST FIRST

JEE MAIN 2019 · 08 APR S2Errors in measurement and significant figuresTRANSCRIBED

In a simple pendulum experiment for determination of acceleration due to gravity (g), time taken for 20 oscillations is measured by using a watch of 1 second least count. The mean value of time taken comes out to be 30 s. The length of the pendulum is measured by using a meter scale of least count 1 mm and the value obtained is 55.0 cm. The percentage error in the determination of g is close to:

  1. A

    0.2%

  2. B

    6.8%

  3. C

    3.5%

  4. D

    0.7%

JEE MAIN 2018 · 15 APR S1Errors in measurement and significant figuresTRANSCRIBED

The relative error in the determination of the surface area of a sphere is α\alpha. Then the relative error in the determination of its volume is:

  1. A

    23⋅α\frac{2}{3} \cdot \alpha

  2. B

    23α\frac{2}{3}\alpha

  3. C

    32α\frac{3}{2}\alpha

  4. D

    α\alpha

JEE MAIN 2018 · 16 APR ONLINEErrors in measurement and significant figuresTRANSCRIBED

The percentage errors in quantities P, Q, R and S are 0.5%, 1%, 3% and 1.5% respectively in the measurement of a physical quantity A=P3Q2RSA = \frac{P^3 Q^2}{\sqrt{RS}}. The maximum percentage error in the value of A will be:

  1. A

    6.5%

  2. B

    7.5%

  3. C

    6.0%

  4. D

    8.5%

JEE MAIN 2018 · 16 APR ONLINEErrors in measurement and significant figuresTRANSCRIBED

The relative uncertainty in the period of a satellite orbiting around the earth is 10−210^{-2}. If the relative uncertainty in the radius of the orbit is negligible, the relative uncertainty in the mass of the earth is:

  1. A

    2×10−22 \times 10^{-2}

  2. B

    6×10−26 \times 10^{-2}

  3. C

    3×10−23 \times 10^{-2}

  4. D

    10−210^{-2}

JEE MAIN 2017 · 02 APR OFFLINEErrors in measurement and significant figuresTRANSCRIBED

The following observations were taken for determining surface tension TT of water by capillary method:
diameter of capillary, D=1.25×10−2D = 1.25 \times 10^{-2} m
rise of water, h=1.45×10−2h = 1.45 \times 10^{-2} m
Using g=9.80g = 9.80 m s−2^{-2} and the simplified relation T=rhg2×103T = \frac{rhg}{2} \times 10^{3} N m−1^{-1}, the possible error in surface tension is closest to:

  1. A

    10%

  2. B

    0.15%

  3. C

    1.5%

  4. D

    2.4%

JEE MAIN 2017 · 09 APR ONLINEErrors in measurement and significant figuresTRANSCRIBED

A physical quantity PP is described by the relation P=a12b2c3d−4P = a^{\frac{1}{2}} b^2 c^3 d^{-4}. If the relative errors in the measurement of a,b,ca, b, c and dd respectively, are 2%, 1%, 3% and 5%. Then the relative error in PP will be:

  1. A

    12%

  2. B

    8%

  3. C

    25%

  4. D

    32%

JEE MAIN 2016 · 03 APR OFFLINEErrors in measurement and significant figuresTRANSCRIBED

A student measures the time period of 100 oscillations of a simple pendulum four times. The data set is 90 s, 91 s, 95 s and 92 s. If the minimum division in the measuring clock is 1 s, then the reported mean time should be:

  1. A

    92±1.892 \pm 1.8 s

  2. B

    92±392 \pm 3 s

  3. C

    92±5.092 \pm 5.0 s

  4. D

    92±292 \pm 2 s

JEE MAIN 2016 · 10 APR ONLINEErrors in measurement and significant figuresTRANSCRIBED

A thin 1 m long rod has a radius of 5 mm. A force of 50π×10350\pi \times 10^3 N is applied at one end to determine its Young's modulus. Assume that the force is exactly known. If the least count in the measurement of all lengths is 0.01 mm, which of the following statements is false?

  1. A

    The maximum value of Y that can be determined is 2×10142 \times 10^{14} N m−2^{-2}

  2. B

    ΔYY\frac{\Delta Y}{Y} gets minimum contribution from the uncertainty in the length.

  3. C

    ΔYY\frac{\Delta Y}{Y} gets its minimum contribution from the uncertainty in strain.

  4. D

    The figure of merit is the largest for the length of the rod.

JEE MAIN 2015 · 04 APR OFFLINEErrors in measurement and significant figuresTRANSCRIBED

The period of oscillation of a simple pendulum is T=2πLgT = 2\pi\sqrt{\frac{L}{g}}. Measured value of ll is 20.0 cm, known to 1 mm accuracy and time for 100 oscillations of the pendulum is found to be 90 s using a wristwatch of 1 s resolution. The accuracy in the determination of gg is

  1. A

    5%

  2. B

    4%

  3. C

    3%

  4. D

    1%

JEE MAIN 2014 · 09 APR ONLINEErrors in measurement and significant figuresTRANSCRIBED

An experiment is performed to obtain the value of acceleration due to gravity g by using a simple pendulum of length L. In this experiment time for 100 oscillations is measured by using a watch of 1 second least count and the value is 90.0 seconds. The length L is measured by using a meter scale of least count 1 mm and the value is 20.0 cm. The error in the determination of g would be:

  1. A

    4.4%

  2. B

    2.27%

  3. C

    1.7%

  4. D

    2.7%

JEE MAIN 2012Errors in measurement and significant figuresTRANSCRIBED

Resistance of a given wire is obtained by measuring the current flowing in it and the voltage difference applied across it. If the percentage errors in the measurement of the current and the voltage difference are 3%3\% each, then error in the value of resistance of the wire is

  1. A

    6%6\%

  2. B

    zero

  3. C

    1%1\%

  4. D

    3%3\%

JEE MAIN 2012Errors in measurement and significant figuresTRANSCRIBED

The amount of heat produced in an electric circuit depends upon the current (II), resistance (RR) and time (tt). If the error made in the measurements of the above quantities are 2%2\%, 1%1\% and 1%1\% respectively then the maximum possible error in the total heat produced will be

  1. A

    1%1\%

  2. B

    2%2\%

  3. C

    6%6\%

  4. D

    3%3\%

JEE MAIN 2012Errors in measurement and significant figuresTRANSCRIBED

A student measured the diameter of a wire using a screw gauge with the least count 0.0010.001 cm and listed the measurements. The measured value should be recorded as

  1. A

    5.32005.3200 cm

  2. B

    5.35.3 cm

  3. C

    5.325.32 cm

  4. D

    5.3205.320 cm

JEE MAIN 2010Errors in measurement and significant figuresTRANSCRIBED

The respective number of significant figures for the numbers 23.02323.023, 0.00030.0003 and 2.1×10−32.1 \times 10^{-3} are

  1. A

    5, 1, 2

  2. B

    5, 1, 5

  3. C

    5, 5, 2

  4. D

    4, 4, 2

JEE MAIN 2008Errors in measurement and significant figuresTRANSCRIBED

A body of mass m=3.513m = 3.513 kg is moving along the xx-axis with a speed of 5.00 ms−15.00\ ms^{-1}. The magnitude of its momentum is recorded as

  1. A

    17.6 kg ms−117.6\ kg\ ms^{-1}

  2. B

    17.565 kg ms−117.565\ kg\ ms^{-1}

  3. C

    17.56 kg ms−117.56\ kg\ ms^{-1}

  4. D

    17.57 kg ms−117.57\ kg\ ms^{-1}