RankRizz

Errors in measurement and significant figures — JEE Main Previous Year Questions

Every JEE Main question on Errors in measurement and significant figures, one of the ideas inside Units, Dimensions & Errors: 75 questions from 2008–2026, 42 of them in the last five years. Newest first, answer key on every one. Free to read.

Questions

75

Years asked

16

Since

2008

Of the chapter

34%

Every Errors in measurement and significant figures question

41–60 OF 75 · NEWEST FIRST

JEE MAIN 2022 · 28 JUL S2Errors in measurement and significant figuresTRANSCRIBED

In an experiment to find acceleration due to gravity gg using simple pendulum, time period of 0.5 s is measured from time of 100 oscillation with a watch of 1 s resolution. If measured value of length is 10 cm known to 1 mm accuracy. The accuracy in the determination of gg is found to be x%x\%. The value of xx is

JEE MAIN 2022 · 28 JUN S2Errors in measurement and significant figuresTRANSCRIBED

A student in the laboratory measures thickness of a wire using screw gauge. The readings are 1.22 mm, 1.23 mm, 1.19 mm and 1.20 mm. The percentage error is x121\frac{x}{121}%. The value of xx is ______.

JEE MAIN 2021 · 24 FEB S2Errors in measurement and significant figuresTRANSCRIBED

The period of oscillation of a simple pendulum is T=2πLgT = 2\pi\sqrt{\frac{L}{g}}. Measured value of LL is 1.0 m from meter scale having a minimum division of 1 mm and time of one complete oscillation is 1.95 s measured from stopwatch of 0.01 s resolution. The percentage error in the determination of gg will be:

  1. A

    1.03%

  2. B

    1.33%

  3. C

    1.30%

  4. D

    1.13%

JEE MAIN 2021 · 16 MAR S2Errors in measurement and significant figuresTRANSCRIBED

In order to determine the Young's Modulus of a wire of radius 0.2 cm (measured using a scale of least count = 0.001 cm) and length 1 m (measured using a scale of least count = 1 mm), a weight of mass 1 kg (measured using a scale of least count = 1 g) was hanged to get the elongation of 0.5 cm (measured using a scale of least count 0.001 cm). What will be the fractional error in the value of Young's Modulus determined by this experiment?

  1. A

    0.14%

  2. B

    0.9%

  3. C

    9%

  4. D

    1.4%

JEE MAIN 2021 · 27 JUL S2Errors in measurement and significant figuresTRANSCRIBED

A physical quantity yy is represented by the formula y=m2r−4gxl−32y = m^2 r^{-4} g^x l^{-\frac{3}{2}}. If the percentage errors found in yy, mm, rr, ll and gg are 18, 1, 0.5, 4 and pp respectively, then find the value of xx and pp.

  1. A

    5 and ±2\pm 2

  2. B

    4 and ±3\pm 3

  3. C

    163\frac{16}{3} and ±32\pm \frac{3}{2}

  4. D

    8 and ±2\pm 2

JEE MAIN 2021 · 01 SEP S2Errors in measurement and significant figuresTRANSCRIBED

A student determined Young's Modulus of elasticity using the formula Y=Mgl34bd3δY = \frac{Mgl^3}{4bd^3\delta}. The value of gg is taken to be 9.8 m s−2^{-2} without any significant error, his observations are as following.

Figure for JEE Main 2021 Physics question on Errors in measurement and significant figures

Then the fractional error in the measurement of YY is:

  1. A

    0.155

  2. B

    0.0083

  3. C

    0.083

  4. D

    0.0155

JEE MAIN 2021 · 26 AUG S2Errors in measurement and significant figuresTRANSCRIBED

If the length of the pendulum in pendulum clock increases by 0.1%, then the error in time per day is:

  1. A

    43.2 s

  2. B

    8.64 s

  3. C

    86.4 s

  4. D

    4.32 s

JEE MAIN 2021 · 01 SEP S2Errors in measurement and significant figuresTRANSCRIBED

Two resistors R1=(4±0.8)R_1 = (4 \pm 0.8) Ω\Omega and R2=(4±0.4)R_2 = (4 \pm 0.4) Ω\Omega are connected in parallel. The equivalent resistance of their parallel combination will be:

  1. A

    (4±0.4)(4 \pm 0.4) Ω\Omega

  2. B

    (2±0.4)(2 \pm 0.4) Ω\Omega

  3. C

    (4±0.3)(4 \pm 0.3) Ω\Omega

  4. D

    (2±0.3)(2 \pm 0.3) Ω\Omega

JEE MAIN 2021 · 16 MAR S1Errors in measurement and significant figuresTRANSCRIBED

The resistance R=VIR = \frac{V}{I}, where V=(50±2)V = (50 \pm 2) V and I=(20±0.2)I = (20 \pm 0.2) A. The percentage error in RR is xx%. The value of xx to the nearest integer is ________.

JEE MAIN 2021 · 18 MAR S2Errors in measurement and significant figuresTRANSCRIBED

The radius of a sphere is measured to be (7.50±0.85)(7.50 \pm 0.85) cm. Suppose the percentage error in its volume is xx. The value of xx, to the nearest integer x, is ___.

JEE MAIN 2021 · 26 AUG S2Errors in measurement and significant figuresTRANSCRIBED

The acceleration due to gravity is found up to an accuracy of 4% on a planet. The energy supplied to a simple pendulum of known mass mm to undertake oscillations of time period TT is being estimated. If time period is measured to an accuracy of 3%, the accuracy to which EE is known is _________ %

JEE MAIN 2021 · 22 JUL S1Errors in measurement and significant figuresTRANSCRIBED

Three students S1S_1, S2S_2 and S3S_3 perform an experiment for determining the acceleration due to gravity (g)(g) using a simple pendulum. They use different lengths of pendulum and record time for different number of oscillations. The observations are as shown in the table.

Figure for JEE Main 2021 Physics question on Errors in measurement and significant figures

(Least count of length = 0.1 m, least count for time = 0.1 s)
If E1E_1, E2E_2 and E3E_3 are the percentage errors in gg for students 1, 2 and 3, respectively, then the minimum percentage error is obtained by student no ___.

JEE MAIN 2020 · 05 SEP S1Errors in measurement and significant figuresTRANSCRIBED

A physical quantity zz depends on four observables aa, bb, cc and dd, as z=a2b2/3cd3z = \frac{a^2 b^{2/3}}{\sqrt{cd^3}}. The percentage of error in the measurement of aa, bb, cc and dd are 2%2\%, 1.5%1.5\%, 4%4\% and 2.5%2.5\% respectively. The percentage of error in zz is:

  1. A

    12.25%

  2. B

    16.5%

  3. C

    13.5%

  4. D

    14.5%

JEE MAIN 2020 · 09 JAN S2Errors in measurement and significant figuresTRANSCRIBED

For the four sets of three measured physical quantities as given below. Which of the following options is correct?
(i)(i) A1=24.36,B1=0.0724,C1=256.2A_1 = 24.36, B_1 = 0.0724, C_1 = 256.2
(ii)(ii) A2=24.44,B2=16.082,C2=240.2A_2 = 24.44, B_2 = 16.082, C_2 = 240.2
(iii)(iii) A3=25.2,B3=19.2812,C3=236.183A_3 = 25.2, B_3 = 19.2812, C_3 = 236.183
(iv)(iv) A4=25,B4=236.191,C4=19.5A_4 = 25, B_4 = 236.191, C_4 = 19.5

  1. A

    A4+B4+C4<A1+B1+C1<A3+B3+C3<A2+B2+C2A_4 + B_4 + C_4 < A_1 + B_1 + C_1 < A_3 + B_3 + C_3 < A_2 + B_2 + C_2

  2. B

    A1+B1+C1=A2+B2+C2=A3+B3+C3=A4+B4+C4A_1 + B_1 + C_1 = A_2 + B_2 + C_2 = A_3 + B_3 + C_3 = A_4 + B_4 + C_4

  3. C

    A1+B1+C1<A2+B2+C2=A3+B3+C3<A4+B4+C4A_1 + B_1 + C_1 < A_2 + B_2 + C_2 = A_3 + B_3 + C_3 < A_4 + B_4 + C_4

  4. D

    A1+B1+C1<A3+B3+C3<A2+B2+C2<A4+B4+C4A_1 + B_1 + C_1 < A_3 + B_3 + C_3 < A_2 + B_2 + C_2 < A_4 + B_4 + C_4

JEE MAIN 2020 · 08 JAN S2Errors in measurement and significant figuresTRANSCRIBED

A simple pendulum is being used to determine the value of gravitational acceleration gg at a certain place. The length of the pendulum is 25.0 cm and a stopwatch with 1 s resolution measures the time taken for 40 oscillations to be 50 s. The accuracy in g is:

  1. A

    5.40%

  2. B

    3.40%

  3. C

    4.40%

  4. D

    2.40%

JEE MAIN 2020 · 06 SEP S2Errors in measurement and significant figuresTRANSCRIBED

A student measuring the diameter of a pencil of circular cross-section with the help of a vernier scale records the following four readings 5.50 mm, 5.55 mm, 5.34 mm, 5.65 mm. The average of these four readings is 5.5375 mm and the standard deviation of the data is 0.07395 mm. The average diameter of the pencil should therefore be recorded as:

  1. A

    (5.5375±0.0739) mm(5.5375 \pm 0.0739)\,\text{mm}

  2. B

    (5.5375±0.0740) mm(5.5375 \pm 0.0740)\,\text{mm}

  3. C

    (5.538±0.074) mm(5.538 \pm 0.074)\,\text{mm}

  4. D

    (5.54±0.07) mm(5.54 \pm 0.07)\,\text{mm}

JEE MAIN 2020 · 06 SEP S1Errors in measurement and significant figuresTRANSCRIBED

The density of a solid metal sphere is diameter. The maximum error in the density of the sphere is (x100)%\left(\frac{x}{100}\right)\%. If the relative errors in measuring the mass and the diameter are 6.0%6.0\% and 1.5%1.5\% respectively, the value of xx is ___

JEE MAIN 2019 · 09 APR S1Errors in measurement and significant figuresTRANSCRIBED

In the density measurement of a cube, the mass and edge length are measured as (10.00±0.10)(10.00 \pm 0.10) kg and (0.10±0.01)(0.10 \pm 0.01) m, respectively. The error in the measurement of density is:

  1. A

    0.31

  2. B

    0.10

  3. C

    0.07

  4. D

    0.01

JEE MAIN 2019 · 10 JAN S2Errors in measurement and significant figuresTRANSCRIBED

The diameter and height of a cylinder are measured by a meter scale to be 12.6±0.112.6 \pm 0.1 cm and 34.2±0.134.2 \pm 0.1 cm, respectively. What will be the value of its volume in appropriate significant figures?

  1. A

    4264±814264 \pm 81 cm3^3

  2. B

    4264.4±81.04264.4 \pm 81.0 cm3^3

  3. C

    4260±804260 \pm 80 cm3^3

  4. D

    4300±804300 \pm 80 cm3^3

JEE MAIN 2019 · 09 APR S2Errors in measurement and significant figuresTRANSCRIBED

The area of a square is 5.29 cm2^2. The area of 7 such squares taking into account the significant figures is:

  1. A

    37.03 cm2^2

  2. B

    37.030 cm2^2

  3. C

    37.0 cm2^2

  4. D

    37 cm2^2