RankRizz
JEE MAIN 2019 · 08 APR S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2019 Physics question — Errors in measurement and significant figures

In a simple pendulum experiment for determination of acceleration due to gravity (g), time taken for 20 oscillations is measured by using a watch of 1 second least count. The mean value of time taken comes out to be 30 s. The length of the pendulum is measured by using a meter scale of least count 1 mm and the value obtained is 55.0 cm. The percentage error in the determination of g is close to:

SOLUTION

The period of a simple pendulum is connected with the acceleration due to gravity by the well-known formula T=2πlg.T = 2\pi\sqrt{\dfrac{l}{g}}.

This relation is usually rewritten to obtain g=4π2lT2.g = \dfrac{4\pi^{2}l}{T^{2}}.

Whenever a quantity such as gg is calculated from measured quantities, its percentage (or fractional) error is obtained by adding the fractional errors of the individual measurements, each multiplied by the power with which that measurement appears. In symbols, if g=k l 1T−2,g = k\,l^{\,1}T^{-2}, then

Δgg  =  Δll  +  2 ΔTT,\dfrac{\Delta g}{g} \;=\; \dfrac{\Delta l}{l} \;+\; 2\,\dfrac{\Delta T}{T},

where Δ\Delta denotes the absolute error in the corresponding quantity.

Step 1: Error in length. The length is measured with a metre scale whose least count is 1 mm=0.1 cm.1\ \text{mm}=0.1\ \text{cm}. We therefore take

Δl=0.1 cm,l=55.0 cm.\Delta l = 0.1\ \text{cm},\qquad l = 55.0\ \text{cm}.

So the fractional (percentage) error in length is

Δll=0.155.0=1.818×10−3  =  0.182%.\dfrac{\Delta l}{l} = \dfrac{0.1}{55.0} = 1.818\times10^{-3} \;=\; 0.182\%.

Step 2: Error in time period. The total time for 20 oscillations is measured with a watch whose least count is 1 s.1\ \text{s}. Thus

Δt=1 s,t=30 s  (for 20 oscillations).\Delta t = 1\ \text{s},\qquad t = 30\ \text{s}\;(\text{for }20\text{ oscillations}).

The time period is the time for one oscillation:

T=t20=3020=1.5 s.T = \dfrac{t}{20} = \dfrac{30}{20} = 1.5\ \text{s}.

Because the division by the exact number 20 introduces no further error, the fractional error in the single-period measurement equals that in the 20-period measurement:

ΔTT=Δtt=130=3.333%.\dfrac{\Delta T}{T} = \dfrac{\Delta t}{t} = \dfrac{1}{30} = 3.333\%.

Step 3: Combining the errors for gg. Substituting the two fractional errors into

Δgg=Δll+2 ΔTT,\dfrac{\Delta g}{g} = \dfrac{\Delta l}{l} + 2\,\dfrac{\Delta T}{T},

we get

Δgg=0.182%+2×3.333%.\dfrac{\Delta g}{g} = 0.182\% + 2 \times 3.333\%.

Now,

2×3.333%=6.666%.2 \times 3.333\% = 6.666\%.

Adding the length contribution:

Δgg=6.666%+0.182%=6.848%.\dfrac{\Delta g}{g} = 6.666\% + 0.182\% = 6.848\%.

Rounded to two significant figures, the percentage error is 6.8%.\boxed{6.8\%}.

Hence, the correct answer is Option B.

Tagged Errors in measurement and significant figures. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicErrors in measurement and significant figures
TypeMultiple choice