RankRizz

Vernier calipers: least count and zero error — JEE Main Previous Year Questions

Every JEE Main question on Vernier calipers: least count and zero error, one of the ideas inside Experimental Skills: 31 questions from 2009–2026, 22 of them in the last five years. Newest first, answer key on every one. Free to read.

Questions

31

Years asked

11

Since

2009

Of the chapter

52%

When JEE Main asked it

Questions on Vernier calipers: least count and zero error in each year it was asked.

20264
20252
20249
20231
20226
20213
20201
20151
20141
20122
20091

Every Vernier calipers: least count and zero error question

1–20 OF 31 · NEWEST FIRST

JEE MAIN 2026 · 05 APR S1Vernier calipers: least count and zero errorTRANSCRIBED

In a Vernier calipers, when both jaws touch each other, zero of the Vernier scale is shifted to the right of zero of the main scale and 7th7^{th} Vernier division coincides with a main scale reading. If the value of 1 main scale division is 1 mm and there are 10 Vernier scale divisions, then the Vernier caliper has

  1. A

    0.07 cm negative zero error

  2. B

    0.7 cm negative zero error

  3. C

    0.07 cm positive zero error

  4. D

    0.7 cm positive zero error

JEE MAIN 2026 · 24 JAN S2Vernier calipers: least count and zero errorTRANSCRIBED

In a vernier callipers, 50 vernier scale divisions are equal to 48 main scale divisions. If one main scale division= 0.05 mm, then the least count of the vernier callipers is__________ mm.

  1. A

    0.05

  2. B

    0.02

  3. C

    0.002

  4. D

    0.005

JEE MAIN 2026 · 28 JAN S1Vernier calipers: least count and zero errorTRANSCRIBED

When both jaws of vernier callipers touch each other, zero mark of the vernier scale is right to zero mark of main scale 4th4^{th} mark on vernier scale coincides with certain mark on the main scale. while measuring the length of a cylinder, observer observes 15 divisions on main scale and 5th5^{th} division of vernier scale coincides with a main scale division. Measured length of cylinder is______mm.
(Least count of Vernier calliper= 0.1 mm)

  1. A

    15.5

  2. B

    15.1

  3. C

    15.9

  4. D

    15.4

JEE MAIN 2026 · 28 JAN S2Vernier calipers: least count and zero errorTRANSCRIBED

In an experiment, a set of reading are obtained as follows - 1.24 mm, 1.25 mm, 1.23 mm, 1.21 mm. The expected least count of the instrwnent used in recording these readings is ___ mm.

  1. A

    0.01

  2. B

    0.001

  3. C

    0.1

  4. D

    0.05

JEE MAIN 2025 · 04 APR S2Vernier calipers: least count and zero errorTRANSCRIBED

For the determination of refractive index of glass slab, a travelling microscope is used whose main scale contains 300 equal divisions equals to 15 cm. The vernier scale attached to the microscope has 25 divisions equals to 24 divisions of main scale. The least count (LC) of the travelling microscope is (in cm) :

  1. A

    0.001

  2. B

    0.002

  3. C

    0.0005

  4. D

    0.0025

JEE MAIN 2025 · 22 JAN S1Vernier calipers: least count and zero errorTRANSCRIBED

Given below are two statements : Statement I : In a vernier callipers, one vernier scale division is always smaller than one main scale division. Statement II : The vernier constant is given by one main scale division multiplied by the number of vernier scale divisions. In the light of the above statements, choose the correct answer from the options given below.

  1. A

    Statement I is true but Statement II is false

  2. B

    Statement I is false but Statement II is true

  3. C

    Both Statement I and Statement II are false

  4. D

    Both Statement I and Statement II are true

JEE MAIN 2024 · 06 APR S2Vernier calipers: least count and zero errorTRANSCRIBED

In finding out refractive index of glass slab the following observations were made through travelling microscope 50 vernier scale division =49= 49 MSD; 20 divisions on main scale in each cm. For mark on paper MSR =8.45 cm= 8.45 \text{ cm}, VC =26= 26. For mark on paper seen through slab MSR =7.12 cm= 7.12 \text{ cm}, VC =41= 41. For powder particle on the top surface of the glass slab MSR =4.05 cm= 4.05 \text{ cm}, VC =1= 1. (MSR = Main Scale Reading, VC = Vernier Coincidence) Refractive index of the glass slab is :

  1. A

    1.521.52

  2. B

    1.351.35

  3. C

    1.421.42

  4. D

    1.241.24

JEE MAIN 2024 · 08 APR S2Vernier calipers: least count and zero errorTRANSCRIBED

Least count of a vernier caliper is 120N\frac{1}{20N} cm. The value of one division on the main scale is 1 mm. Then the number of divisions of main scale that coincide with N divisions of vernier scale is :

  1. A

    (2N−1)(2N - 1)

  2. B

    (2N−12N)\left(\frac{2N-1}{2N}\right)

  3. C

    (2N−12)\left(\frac{2N-1}{2}\right)

  4. D

    (2N−120N)\left(\frac{2N-1}{20N}\right)

JEE MAIN 2024 · 01 FEB S1Vernier calipers: least count and zero errorTRANSCRIBED

1010 divisions on the main scale of a Vernier calliper coincide with 1111 divisions on the Vernier scale. If each division on the main scale is of 55 units, the least count of the instrument is :

  1. A

    12\frac{1}{2}

  2. B

    1011\frac{10}{11}

  3. C

    5011\frac{50}{11}

  4. D

    511\frac{5}{11}

JEE MAIN 2024 · 27 JAN S2Vernier calipers: least count and zero errorTRANSCRIBED

Given below are two statements : one is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A) : In Vernier calliper if positive zero error exists, then while taking measurements, the reading taken will be more than the actual reading.
Reason (R) : The zero error in Vernier Calliper might have happened due to manufacturing defect or due to rough handling.
In the light of the above statements, choose the correct answer from the options given below :

  1. A

    Both (A) and (R) are correct and (R) is the correct explanation of (A)

  2. B

    Both (A) and (R) are correct but (R) is not the correct explanation of (A)

  3. C

    (A) is true but (R) is false

  4. D

    (A) is false but (R) is true

JEE MAIN 2024 · 30 JAN S2Vernier calipers: least count and zero errorTRANSCRIBED

If 50 Vernier divisions are equal to 49 main scale divisions of a travelling microscope and one smallest reading of main scale is 0.5 mm, the Vernier constant of travelling microscope is:

  1. A

    0.1 mm

  2. B

    0.1 cm

  3. C

    0.01 cm

  4. D

    0.01 mm

JEE MAIN 2024 · 05 APR S2Vernier calipers: least count and zero errorTRANSCRIBED

A vernier callipers has 20 divisions on the vernier scale, which coincides with 19th19^{th} division on the main scale. The least count of the instrument is 0.10.1 mm. One main scale division is equal to ______ mm.

  1. A

    0.50.5

  2. B

    22

  3. C

    55

  4. D

    11

JEE MAIN 2024 · 06 APR S2Vernier calipers: least count and zero errorTRANSCRIBED

In a vernier calliper, when both jaws touch each other, zero of the vernier scale shifts towards left and its 4th4^{th} division coincides exactly with a certain division on main scale. If 50 vernier scale divisions equal to 49 main scale divisions and zero error in the instrument is 0.04 mm0.04 \text{ mm} then how many main scale divisions are there in 1 cm1 \text{ cm}?

  1. A

    1010

  2. B

    55

  3. C

    2020

  4. D

    4040

JEE MAIN 2024 · 08 APR S1Vernier calipers: least count and zero errorTRANSCRIBED

The diameter of a sphere is measured using a vernier caliper whose 9 divisions of main scale are equal to 10 divisions of vernier scale. The shortest division on the main scale is equal to 1 mm1 \text{ mm}. The main scale reading is 2 cm2 \text{ cm} and second division of vernier scale coincides with a division on main scale. If mass of the sphere is 8.635 g8.635 \text{ g}, the density of the sphere is:

  1. A

    2.0 g/cm32.0 \text{ g/cm}^3

  2. B

    1.7 g/cm31.7 \text{ g/cm}^3

  3. C

    2.2 g/cm32.2 \text{ g/cm}^3

  4. D

    2.5 g/cm32.5 \text{ g/cm}^3

JEE MAIN 2024 · 09 APR S1Vernier calipers: least count and zero errorTRANSCRIBED

One main scale division of a vernier caliper is equal to mm units. If nthn^{th} division of main scale coincides with (n+1)th(n+1)^{th} division of vernier scale, the least count of the vernier caliper is :

  1. A

    n(n+1)\frac{n}{(n+1)}

  2. B

    1(n+1)\frac{1}{(n+1)}

  3. C

    m(n+1)\frac{m}{(n+1)}

  4. D

    mn(n+1)\frac{m}{n(n+1)}

JEE MAIN 2023 · 10 APR S2Vernier calipers: least count and zero errorTRANSCRIBED

In an experiment with vernier callipers of least count 0.1 mm, when two jaws are joined together the zero of vernier scale lies right to the zero of the main scale and 6th^{th} division of vernier scale coincides with the main scale division. While measuring the diameter of a spherical bob, the zero of vernier scale lies in between 3.2 cm and 3.3 cm marks and 4th^{th} division of vernier scale coincides with the main scale division. The diameter of bob is measured as

  1. A

    3.22 cm

  2. B

    3.18 cm

  3. C

    3.26 cm

  4. D

    3.25 cm

JEE MAIN 2022 · 29 JUL S1Vernier calipers: least count and zero errorTRANSCRIBED

A travelling microscope has 20 divisions per cm on the main scale while its Vernier scale has total 50 divisions and 25 Vernier scale divisions are equal to 24 main scale divisions, what is the least count of the travelling microscope?

  1. A

    0.001 cm

  2. B

    0.002 mm

  3. C

    0.002 cm

  4. D

    0.005 cm

JEE MAIN 2022 · 26 JUL S2Vernier calipers: least count and zero errorTRANSCRIBED

In a Vernier Caliper 10 divisions of Vernier scale is equal to the 9 divisions of main scale. When both jaws of Vernier calipers touch each other, the zero of the Vernier scale is shifted to the left of zero of the main scale and 4th Vernier scale division exactly coincides with the main scale reading. One main scale division is equal to 1 mm1 \text{ mm}. While measuring diameter of a spherical body, the body is held between two jaws. It is now observed that zero of the Vernier scale lies between 30 and 31 divisions of main scale reading and 6th Vernier scale division exactly coincides with the main scale reading. The diameter of the spherical body will be:

  1. A

    3.02 cm3.02 \text{ cm}

  2. B

    3.06 cm3.06 \text{ cm}

  3. C

    3.10 cm3.10 \text{ cm}

  4. D

    3.20 cm3.20 \text{ cm}

JEE MAIN 2022 · 26 JUN S1Vernier calipers: least count and zero errorTRANSCRIBED

In a vernier callipers, each cm on the main scale is divided into 2020 equal parts. If tenth vernier scale division coincides with nineth main scale division. Then the value of vernier constant will be ______ ×10−2\times 10^{-2} mm

JEE MAIN 2022 · 26 JUN S2Vernier calipers: least count and zero errorTRANSCRIBED

A travelling microscope is used to determine the refractive index of a glass slab. If 4040 divisions are there in 11 cm on main scale and 5050 Vernier scale divisions are equal to 4949 main scale divisions, then least count of the travelling microscope is ______ ×10−6\times 10^{-6} m.