RankRizz
JEE MAIN 2026 · 28 JAN S1+4 / −1EASYTRANSCRIBED

JEE Main 2026 Physics question — Vernier calipers: least count and zero error

When both jaws of vernier callipers touch each other, zero mark of the vernier scale is right to zero mark of main scale 4th4^{th} mark on vernier scale coincides with certain mark on the main scale. while measuring the length of a cylinder, observer observes 15 divisions on main scale and 5th5^{th} division of vernier scale coincides with a main scale division. Measured length of cylinder is______mm.
(Least count of Vernier calliper= 0.1 mm)

SOLUTION

The reading shown by a vernier calliper has two parts:
  • Main-scale reading (MSR) = value at the mark just left of the vernier zero.
  • Vernier-scale reading (VSR) = (coinciding vernier division) ×\times least count (LC).
Total reading == MSR ++ VSR.

Case 1: Determining the zero error (jaws closed)

When the jaws are in contact, the vernier zero is to the right of the main-scale zero; this is a positive zero error.
Here the 4th4^{\text{th}} vernier division coincides with a main-scale mark.

MSR = 0 mm0 \text{ mm} because the vernier zero has not crossed the first main-scale division.
VSR =4×LC=4×0.1 mm=0.4 mm= 4 \times LC = 4 \times 0.1 \text{ mm} = 0.4 \text{ mm}.

Observed zero reading =0+0.4=0.4 mm= 0 + 0.4 = 0.4 \text{ mm}, so
zero error =+0.4 mm= +0.4 \text{ mm} and the zero correction (to be applied later) is −0.4 mm-0.4 \text{ mm}.

Case 2: Measuring the cylinder

The observer notes:
  • MSR = 15 mm15 \text{ mm} (15 main-scale divisions lie to the left of the vernier zero).
  • The 5th5^{\text{th}} vernier division coincides with a main-scale mark.

VSR =5×0.1 mm=0.5 mm= 5 \times 0.1 \text{ mm} = 0.5 \text{ mm}.

Raw reading (uncorrected) =15+0.5=15.5 mm= 15 + 0.5 = 15.5 \text{ mm}.

Applying the zero correction
True length =15.5 mm−0.4 mm=15.1 mm= 15.5 \text{ mm} - 0.4 \text{ mm} = 15.1 \text{ mm}.

Therefore, the measured length of the cylinder is 15.1 mm\mathbf{15.1 \text{ mm}} (Option B).

Tagged Vernier calipers: least count and zero error. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicVernier calipers: least count and zero error
TypeMultiple choice