RankRizz

Screw gauge: pitch, least count and zero error — JEE Main Previous Year Questions

Every JEE Main question on Screw gauge: pitch, least count and zero error, one of the ideas inside Experimental Skills: 24 questions from 2008–2026, 11 of them in the last five years. Newest first, answer key on every one. Free to read.

Questions

24

Years asked

12

Since

2008

Of the chapter

40%

Every Screw gauge: pitch, least count and zero error question

21–24 OF 24 · NEWEST FIRST

JEE MAIN 2018 · 15 APR S1Screw gauge: pitch, least count and zero errorTRANSCRIBED

In a screw gauge, 5 complete rotations of the screw cause it to move a linear distance of 0.25 cm. There are 100 circular scale divisions. The thickness of a wire measured by this screw gauge gives a reading of 4 main scale divisions and 30 circular scale divisions. Assuming negligible zero error, the thickness of the wire is:

  1. A

    0.0430 cm

  2. B

    0.3150 cm

  3. C

    0.4300 cm

  4. D

    0.2150 cm

JEE MAIN 2016 · 03 APR OFFLINEScrew gauge: pitch, least count and zero errorTRANSCRIBED

A screw gauge with a pitch of 0.5 mm and a circular scale with 50 divisions is used to measure the thickness of a thin sheet of aluminium. Before starting the measurement, it is found that when the two jaws of the screw gauge are brought in contact, the 45th division coincides with the main scale line and that the zero of the main scale is barely visible. What is the thickness of the sheet if the main scale reading is 0.5 mm and the 25th division coincides with the main scale line?

  1. A

    0.70 mm

  2. B

    0.50 mm

  3. C

    0.75 mm

  4. D

    0.80 mm

JEE MAIN 2011Screw gauge: pitch, least count and zero errorTRANSCRIBED

A screw gauge gives the following reading when used to measure the diameter of a wire. Main scale reading: 0 mm0 \, \text{mm}. Circular scale reading: 52 divisions. Given that 1 mm1 \, \text{mm} on main scale corresponds to 100 divisions of the circular scale. The diameter of wire from the above data is:

  1. A

    0.052 cm0.052 \, \text{cm}

  2. B

    0.026 cm0.026 \, \text{cm}

  3. C

    0.005 cm0.005 \, \text{cm}

  4. D

    0.52 cm0.52 \, \text{cm}

JEE MAIN 2008Screw gauge: pitch, least count and zero errorTRANSCRIBED

Two full turns of the circular scale of a screw gauge cover a distance of 1 mm on its main scale. The total number of divisions on the circular scale is 50. Further, it is found that the screw gauge has a zero error of −0.03-0.03 mm while measuring the diameter of a thin wire, a student notes the main scale reading of 3 mm and the number of circular scale divisions in line with the main scale as 35. The diameter of the wire is

  1. A

    3.32 mm

  2. B

    3.73 mm

  3. C

    3.67 mm

  4. D

    3.38 mm