RankRizz
JEE MAIN 2016 · 03 APR OFFLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2016 Physics question — Screw gauge: pitch, least count and zero error

A screw gauge with a pitch of 0.5 mm and a circular scale with 50 divisions is used to measure the thickness of a thin sheet of aluminium. Before starting the measurement, it is found that when the two jaws of the screw gauge are brought in contact, the 45th division coincides with the main scale line and that the zero of the main scale is barely visible. What is the thickness of the sheet if the main scale reading is 0.5 mm and the 25th division coincides with the main scale line?

SOLUTION

We have a screw gauge whose pitch is given as 0.5 mm0.5\ \text{mm}. The circular scale is divided into 5050 equal parts.

First, we find the least count. The formula is

Least count (LC)=PitchNumber of circular-scale divisions.\text{Least count (LC)}=\frac{\text{Pitch}}{\text{Number of circular-scale divisions}}.

Substituting the values,

LC=0.5 mm50=0.01 mm.\text{LC}=\frac{0.5\ \text{mm}}{50}=0.01\ \text{mm}.

Now we determine the zero error of the screw gauge. When the two jaws are in contact, the question tells us that the 45th45^{\text{th}} circular-scale division coincides with the main-scale line and the zero of the main scale is just visible. This means the zero mark of the circular scale has travelled past the reference line by 55 divisions, because one full revolution would have taken the index from 4545 to 5050 divisions.

The displacement corresponding to these 55 divisions is

5×LC=5×0.01 mm=0.05 mm.5 \times \text{LC}=5 \times 0.01\ \text{mm}=0.05\ \text{mm}.

Since the zero of the circular scale has gone beyond the reference line, the instrument is reading less than the true length; this is termed a negative zero error. Hence

Zero error=−0.05 mm.\text{Zero error} = -0.05\ \text{mm}.

For future measurements we must therefore add 0.05 mm0.05\ \text{mm} (the zero correction) to every observed reading. Symbolically, if Z.E. is negative, then

Zero correction=−(Zero error)=+0.05 mm.\text{Zero correction} = -(\text{Zero error}) = +0.05\ \text{mm}.

Next we take the actual observation with the aluminium sheet in between the jaws. The main-scale reading is given as 0.5 mm0.5\ \text{mm} and the 25th25^{\text{th}} circular-scale division coincides with the main-scale line.

The observed reading is therefore

Observed reading=(Main-scale reading)+(Circular-scale division)×LC.\text{Observed reading} = (\text{Main-scale reading}) + (\text{Circular-scale division})\times\text{LC}.

Substituting,

Observed reading=0.5 mm+25×0.01 mm=0.5 mm+0.25 mm=0.75 mm.\text{Observed reading} = 0.5\ \text{mm} + 25 \times 0.01\ \text{mm} = 0.5\ \text{mm} + 0.25\ \text{mm} = 0.75\ \text{mm}.

To obtain the true thickness we add the zero correction:

True thickness=0.75 mm+0.05 mm=0.80 mm.\text{True thickness} = 0.75\ \text{mm} + 0.05\ \text{mm} = 0.80\ \text{mm}.

Hence, the correct answer is Option D.

Tagged Screw gauge: pitch, least count and zero error. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicScrew gauge: pitch, least count and zero error
TypeMultiple choice