A resistance of is connected to a source of alternating current rated V, Hz. Find the time taken by the current to change from its maximum value to the rms value :
- A
2.5 ms
- B
1.25 ms
- C
2.5 s
- D
0.25 s
Every Alternating Current question JEE Main has set, grouped by the idea it tests rather than the order of the syllabus. 165 questions across 7 distinct ideas. Free to read, answer key on every one.
Questions
165
Distinct ideas
7
Share of marks
2%
Difficulty
EASY
A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Alternating Current questions actually test.
81–100 OF 165 · NEWEST FIRST
A resistance of is connected to a source of alternating current rated V, Hz. Find the time taken by the current to change from its maximum value to the rms value :
2.5 ms
1.25 ms
2.5 s
0.25 s
For a series circuit, vs curve is shown
(a) To the left of , the circuit is mainly capacitive.
(b) To the left of , the circuit is mainly inductive.
(c) At , impedance of the circuit is equal to the resistance of the circuit.
(d) At , impedance of the circuit is 0.
Choose the most appropriate answer from the options given below.
(a) and (d) only
(b) and (d) only
(a) and (c) only
(b) and (c) only
A circuit element X when connected to an AC supply of peak voltage 100 V gives a peak current of 5 A which is in phase with the voltage. A second element Y when connected to the same AC supply also gives the same value of peak current which lags behind the voltage by . If X and Y are connected in series to the same supply, what will be the rms value of the current in ampere?
Given below are two statements :
Statement-I: The reactance of an ac circuit is zero. It is possible that the circuit contains a capacitor and an inductor.
Statement-II: In ac circuit, the average power delivered by the source never becomes zero.
In the light of the above statements, choose the correct answer from the options given below
Both Statement I and Statement II are true.
Both Statement I and Statement II are false.
Statement I is true but Statement II is false.
Statement I is false but Statement II is true.
A V, Hz AC source is connected to a V, W lamp and an additional resistance in series (as shown in figure) to run the lamp at its peak brightness, then the value of (in ohm) will be

As shown in the figure an inductor of inductance mH is connected to an AC source of emf V and frequency Hz. The instantaneous voltage of the source is V when the peak value of current is A. The value of is ______.

An inductor of 0.5 mH, a capacitor of 200 F and a resistor of 2 are connected in series with a 220 V ac source. If the current is in phase with the emf, the frequency of ac source will be ______ Hz.
A V, Hz, AC source is connected in the circuit (as shown in figure). The current through the resistance , at resonance in the circuit, will be ______ A.
In the given circuit, the magnitude of and are twice that of . Given that Hz, the inductance of the coil is mH. The value of is ______.

The effective current in the given circuit at very high frequencies will be ______ A.

To light, a , lamp is connected, in series with a capacitor of capacitance , with , AC source. The value of will be ______.
The frequencies at which the current amplitude in an LCR series circuit becomes times its maximum value, are 212 rad s and 232 rad s. The value of resistance in the circuit is . The self inductance in the circuit is _____ mH.
In a series LCR circuit, the inductance, capacitance and resistance are mH, F and respectively. They are connected to an AC source of voltage V and frequency of Hz. The approximate value of current in the circuit will be ______ A.

An AC source is connected to an inductance of mH, a capacitance of F and a resistance of as shown in figure. The time in which the resistance having a thermal capacity J °C will get heated by C is ______ s.

A telegraph line of length km has a capacity of F km and it carries an alternating current at kilo cycle per second. If minimum impedance is required, then the value of the inductance that needs to be introduced in series is ______ mH. (If )
For the given circuit, comment on the type of transformer used:

Auxiliary transformer
Auto transformer
Step-up transformer
Step down transformer
The current (i) at time and respectively for the given circuit is:

An L.C.R. circuit contains resistance of 110 and a supply of 220 V at 300 rad s angular frequency. If only capacitance is removed from the circuit, current lags behind the voltage by 45°. If on the other hand, only the inductor is removed the current leads by 45° with the applied voltage. The R.M.S. current flowing in the circuit will be:
2.5 A
2 A
1 A
1.5 A
A series LCR circuit driven by 300 V at a frequency of 50 Hz contains a resistance R = 3 k, an inductor of inductive reactance and an unknown capacitor. The value of capacitance to maximise the average power should be: (take )
400 F
4 F
40 F
25 F
In a circuit consisting of a capacitance and a generator with alternating emf, , and are the voltage and current. Correct phasor diagram for such circuit is:





OTHER PHYSICS CHAPTERS