RankRizzStart free

Mechanical Properties of Solids — JEE Main Previous Year Questions

Every Mechanical Properties of Solids question JEE Main has set, grouped by the idea it tests rather than the order of the syllabus. 126 questions across 6 distinct ideas. Free to read, answer key on every one.

Questions

126

Distinct ideas

6

Share of marks

3.4%

Difficulty

EASY

The ideas inside Mechanical Properties of Solids

A chapter is not one subject — it is a handful of procedures the examiner reuses. These are the ones Mechanical Properties of Solids questions actually test.

01Stress, strain, Hooke's law and Young's modulusset 70×
02Stress-strain curve and elastic behaviourset 5×
03Bulk modulus and compressibilityset 17×
04Modulus of rigidity and Poisson's ratioset 10×
05Elastic potential energy in stretched wiresset 10×
06Thermal stressset 14×

Every Mechanical Properties of Solids question

1–20 OF 126 · NEWEST FIRST

JEE MAIN 2026 · 28 JAN S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Two wires A and B made of different materials of lengths 6.0 cm and 5.4 cm, respectively and area of cross sections , respectively are stretched by the same magnitude under a given load. The ratio of the Young's modulus of A to that of B is x : 3. The value of x is ___ .

  1. A

    4

  2. B

    2

  3. C

    1

  4. D

    5

JEE MAIN 2026 · 04 APR S1Bulk modulus and compressibilityTRANSCRIBED

The increase in the pressure required to decrease the volume of water is N/m². The percentage decrease in the volume is _____. (Bulk modulus of water = N/m².)

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2026 · 06 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A lift of mass 1600 kg is supported by thick iron wire. If the maximum stress which the wire can withstand is N/m and its radius is 4 mm, then maximum acceleration the lift can take is _______ m/s.
(take g = 10 m/s and = 3.14)

  1. A

    2.56

  2. B

    3.89

  3. C

    4.32

  4. D

    5.16

JEE MAIN 2026 · 04 APR S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A metal string A is suspended from a rigid support and its free end is attached to a block of mass M. Second block having mass 2M is suspended at the bottom of the first block using a string B. The area of cross sections of strings A and B are same. The ratio of lengths of strings of A to B is 2 and the ratio of their Young's moduli is 0.5. The ratio of elongations in A to B is ______.

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2026 · 05 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The Young's modulus of steel wire of radius and length is . If the radius and length of the wire are doubled then the value of

  1. A

    increases two times

  2. B

    reduces to half

  3. C

    remains unchanged

  4. D

    becomes one-fourth

JEE MAIN 2026 · 06 APR S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Figure represents the extension () of a wire of length 1 meter, suspended from the ceiling of the room at one end with a load W connected to the other end. If the cross-sectional area of the wire is m then the Young's modulus of the wire is __________ N/m.

image
  1. A

  2. B

  3. C

  4. D

JEE MAIN 2026 · 04 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A string A of length 0.314 m and Young's modulus N/m² is connected to another string B of length and Young's modulus both twice of those of A. This series combination of strings is then suspended from a rigid support and its free end is fixed to a load of mass 0.8 kg. The net change in length of the combination is _____ mm.
(radius of both the strings is 0.2 mm and acceleration due to gravity = 10 ) 
(Mass of both strings is to be neglected as compared to the mass of load )

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2026 · 06 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

The two wires and of equal cross-section but of different materials are joined together. The ratio of Young's modulus of wire and wire is 20/11. When the joined wire is kept under certain tension the elongations in the wires and are equal. If the length of wire is 2.2 m, then the length of wire is _______ m.

  1. A

    1.1

  2. B

    2.22

  3. C

    1.21

  4. D

    4.44

JEE MAIN 2026 · 24 JAN S1Thermal stressTRANSCRIBED

A brass wire of length 2 m and radius 1 mm at 27 °C is held taut between two rigid supports. Initially, it was cooled to a temperature of -43 °C, creating a tension T in the wire. The temperature to which the wire has to be cooled in order to increase the tension in it to 1.4T, is ____ °C.

  1. A

    -80

  2. B

    -86

  3. C

    -65

  4. D

    -71

JEE MAIN 2026 · 05 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Two wires as shown in the figure below, made of steel and have breaking stress of N/m. Area of cross-section of upper wire is 0.008 cm and of lower wire is 0.004 cm. The maximum mass that can be added to pan without breaking any wire is _______ kg. (take m/s)

image
  1. A

     

  2. B

  3. C

  4. D

JEE MAIN 2026 · 23 JAN S1Stress-strain curve and elastic behaviourTRANSCRIBED

The strain-stress plot for materials A, B, C and D is shown in the figure. Which material has the largest Young's modulus?

45
  1. A

    B

  2. B

    A

  3. C

    D

  4. D

    C

JEE MAIN 2026 · 05 APR S2Elastic potential energy in stretched wiresTRANSCRIBED

A copper wire of length 3 m is stretched by 3 mm by applying an external force. The volume of the wire is m³. The elastic potential energy stored in the wire in stretched condition would be _______  J :
(Given Young's modulus of copper  N/m²)

JEE MAIN 2026 · 05 APR S1Modulus of rigidity and Poisson's ratioTRANSCRIBED

A cube has side length 5 cm and modulus of rigidity N/m. The displacement produced by a force of 10 N in the upper face of cube is _______ mm.

JEE MAIN 2026 · 02 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A uniform wire of length of weight w is suspended from the roof with a weight of W at the other end. The stress in the wire at distance from the top is , where A is the cross sectional area of the wire. The value of is __________.

JEE MAIN 2026 · 06 APR S1Bulk modulus and compressibilityTRANSCRIBED

A certain gas is isothermally compressed to of its initial volume ( litre) by applying required pressure. If the bulk modulus of the gas is N/m, the magnitude of work done on the gas is _______ J.

JEE MAIN 2025 · 08 APR S2Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

A 3 m long wire of radius 3 mm shows an extension of 0.1 mm when loaded vertically by a mass of 50 kg in an experiment to determine Young's modulus. The value of Young's modulus of the wire is Nm, where P is : (Take m/s)

  1. A

    5

  2. B

    10

  3. C

    25

  4. D

    2.5

JEE MAIN 2025 · 04 APR S2Modulus of rigidity and Poisson's ratioTRANSCRIBED

A cylindrical rod of length 1 m and radius 4 cm is mounted vertically. It is subjected to a shear force of N at the top. Considering infinitesimally small displacement in the upper edge, the angular displacement of the rod axis from its original position would be : (shear moduli, N/m)

  1. A

  2. B

  3. C

  4. D

JEE MAIN 2025 · 29 JAN S1Bulk modulus and compressibilityTRANSCRIBED

The fractional compression of water at the depth of 2.5 km below the sea level is ______%.Given, the Bulk modulus of water , density of water , acceleration due to gravity .

  1. A

    1.25

  2. B

    1.0

  3. C

    1.75

  4. D

    1.5

JEE MAIN 2025 · 07 APR S1Stress, strain, Hooke's law and Young's modulusTRANSCRIBED

Two wires A and B are made of same material having ratio of lengths and their diameters ratio . If both the wires are stretched using same force, what would be the ratio of their respective elongations?

  1. A

    1 : 6

  2. B

    1 : 12

  3. C

    3 : 4

  4. D

    1 : 3

JEE MAIN 2025 · 02 APR S1Elastic potential energy in stretched wiresTRANSCRIBED

A steel wire of length 2 m and Young's modulus Nm is stretched by a force. If Poisson ratio and transverse strain for the wire are 0.2 and respectively, then the elastic potential energy density of the wire is ______ (in SI units).