RankRizz
JEE MAIN 2020 · 08 JAN S2+4MEDIUMTRANSCRIBED

JEE Main 2020 Physics question — Calorimetry and specific heat capacity

Three containers C1C_1, C2C_2 and C3C_3 have water at different temperatures. The table below shows the final temperature T when different amounts of water (given in liters) are taken from each container and mixed (assume no loss of heat during the process)

Figure for JEE Main 2020 Physics question on Calorimetry and specific heat capacity

The value of θ\theta (in ∘^\circC to the nearest integer) is__________

SOLUTION

We begin by recalling the principle of calorimetry for ideal mixtures. When different masses (or, for a liquid of uniform density, different volumes) of water at temperatures T1, T2, T3T_1,\,T_2,\,T_3 are mixed and no heat is lost to the surroundings, the final equilibrium temperature is the weighted average:

Tfinal=m1T1+m2T2+m3T3m1+m2+m3,T_{\text{final}}=\frac{m_1T_1+m_2T_2+m_3T_3}{m_1+m_2+m_3},

where m1,m2,m3m_1,m_2,m_3 are the respective masses or volumes. Here each litre of water is taken to have the same mass, so we may write all equations directly in litres.

Let the unknown temperatures of the three containers be

T1  (for C1),T2  (for C2),T3  (for C3).T_1\;(\text{for }C_1),\qquad T_2\;(\text{for }C_2),\qquad T_3\;(\text{for }C_3).

Now we translate every piece of experimental data into an equation.

First mixture: 1 L from C1C_1 and 2 L from C2C_2 are mixed, giving a final temperature of 60∘C60^\circ\text{C}. Substituting in the formula,

1⋅T1+2⋅T21+2=60.\frac{1\cdot T_1+2\cdot T_2}{1+2}=60.

Multiplying both sides by 3, we obtain

T1+2T2=180−(1)T_1+2T_2=180 \quad -(1)

Second mixture: 1 L from C2C_2 and 2 L from C3C_3 are mixed, giving 30∘C30^\circ\text{C}. Thus,

1⋅T2+2⋅T31+2=30,\frac{1\cdot T_2+2\cdot T_3}{1+2}=30,

which simplifies, after multiplying by 3, to

T2+2T3=90−(2)T_2+2T_3=90 \quad -(2)

Third mixture: 2 L from C1C_1 and 1 L from C3C_3 are mixed, again giving 60∘C60^\circ\text{C}. Hence,

2⋅T1+1⋅T32+1=60,\frac{2\cdot T_1+1\cdot T_3}{2+1}=60,

and multiplying through by 3 yields

2T1+T3=180−(3)2T_1+T_3=180 \quad -(3)

We now have a system of three linear equations in the three unknowns T1,T2,T3T_1,T_2,T_3:

T1+2T2=180(1)T2+2T3=90(2)2T1+T3=180(3)\begin{aligned} T_1+2T_2 &= 180\qquad&(1)\\ T_2+2T_3 &= 90\qquad&(2)\\ 2T_1+T_3 &= 180\qquad&(3) \end{aligned}

From equation (1) we solve for T1T_1 in terms of T2T_2:

T1=180−2T2.−(4)T_1=180-2T_2. \quad -(4)

Substituting (4) in equation (3):

2(180−2T2)+T3=180.2(180-2T_2)+T_3=180.

Expanding the left side gives

360−4T2+T3=180.360-4T_2+T_3=180.

Isolating T3T_3 we find

T3=180+4T2−360=4T2−180.−(5)T_3=180+4T_2-360=4T_2-180. \quad -(5)

Now substitute (5) into equation (2):

T2+2(4T2−180)=90.T_2+2(4T_2-180)=90.

Simplifying the left-hand side,

T2+8T2−360=90,T_2+8T_2-360=90,

which combines to

9T2−360=90.9T_2-360=90.

Adding 360 to both sides gives

9T2=450,9T_2=450,

and dividing by 9 yields

T2=50∘C.T_2=50^\circ\text{C}.

Back-substitution: Using T2=50T_2=50 in equation (4),

T1=180−2(50)=180−100=80∘C.T_1=180-2(50)=180-100=80^\circ\text{C}.

Using T2=50T_2=50 in equation (5),

T3=4(50)−180=200−180=20∘C.T_3=4(50)-180=200-180=20^\circ\text{C}.

So the individual container temperatures are

T1=80∘C,T2=50∘C,T3=20∘C.T_1=80^\circ\text{C},\qquad T_2=50^\circ\text{C},\qquad T_3=20^\circ\text{C}.

Finally, we turn to the required mixture of 1 L from each container. The total volume is 1+1+1=31+1+1=3 litres, so

θ=1⋅T1+1⋅T2+1⋅T33=80+50+203=1503=50∘C.\theta=\frac{1\cdot T_1+1\cdot T_2+1\cdot T_3}{3} =\frac{80+50+20}{3} =\frac{150}{3} =50^\circ\text{C}.

So, the answer is 5050.

Tagged Calorimetry and specific heat capacity. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicCalorimetry and specific heat capacity
TypeNumerical answer