We have to use the principle of calorimetry, namely that in an isolated system
Heat lost by the hot body=Heat gained by the cold bodies.
The heat absorbed or released by any body is given by the well-known formula
Q=mcΔT,
where m is the mass, c is the specific heat capacity and ΔT is the change in temperature.
Data for the aluminium sphere
Mass m1=0.20kg, initial temperature T1=150∘C, final temperature Tf=40∘C.
So the temperature fall is
ΔT1=T1−Tf=150∘C−40∘C=110∘C.
Data for the water in the calorimeter
Volume given is 150cc. Because the density of water is 1g cm−3, the mass is
m2=150g=0.150kg.
Initial temperature T2=27∘C, final temperature Tf=40∘C; hence
ΔT2=Tf−T2=40∘C−27∘C=13∘C.
Data for the calorimeter itself
The water equivalent is 0.025kg. This means its heat capacity is the same as that of 0.025kg of water. Therefore we can treat it as additional water of mass
m3=0.025kg,
with the same temperature rise
ΔT3=ΔT2=13∘C.
Specific heat of water
For water we use cw=4200J kg−1∘C−1. (The conversion given, 4.2J=1cal, is equivalent to this value.)
Heat gained by water
Q2=m2cwΔT2=0.150kg×4200J kg−1∘C−1×13∘C.
First multiply the mass and specific heat:
0.150×4200=630J∘C−1.
Then multiply by the temperature rise:
630×13=8190J.
Heat gained by the calorimeter
Q3=m3cwΔT3=0.025kg×4200J kg−1∘C−1×13∘C.
Calculating similarly:
0.025×4200=105J∘C−1,
and
105×13=1365J.
Total heat gained by water plus calorimeter
Qgained=Q2+Q3=8190J+1365J=9555J.
Heat lost by the aluminium sphere
Let c be the specific heat capacity of aluminium (in J kg−1∘C−1). Then
Qlost=m1cΔT1=0.20kg×c×110∘C.
Multiplying the numerical factors first:
0.20×110=22,
so
Qlost=22c.
Applying the heat balance
Because no heat escapes the system,
Qlost=Qgained.
Therefore
22c=9555.
Solving for c
c=229555J kg−1∘C−1.
Carrying out the division:
c=434.318J kg−1∘C−1(approximately).
Rounding to three significant figures gives
c≈434J kg−1∘C−1.
Hence, the correct answer is Option A.