RankRizz
JEE MAIN 2014 · 06 APR OFFLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2014 Physics question — Heat conduction and thermal resistance

Three rods of Copper, Brass and Steel are welded together to form a Y-shaped structure. Area of cross-section of each rod is 4 cm2^2. End of copper rod is maintained at 100 °C. Where as ends of brass and steel are kept at 0 °C. Lengths of the copper, brass and steel rods are 46, 13 and 12 cms respectively. The rods are thermally insulated from surroundings except at ends. Thermal conductivities of copper, brass and steel are 0.92, 0.26 and 0.12 CGS units respectively. Rate of heat flow through copper rod is:

SOLUTION

In steady-state heat conduction, the heat current through a uniform rod is given by the formula

Q  =  k A (θ1−θ2)L,Q \;=\; \dfrac{k\,A\,(\theta_1-\theta_2)}{L},

where kk is the thermal conductivity, AA the cross-sectional area, LL the length of the rod and (θ1−θ2)(\theta_1-\theta_2) the temperature difference between its ends.

All three rods have the same cross-section A=4 cm2A = 4\ \text{cm}^2. The given data are

kCu=0.92,LCu=46 cm,θhot=100∘C,kBr=0.26,LBr=13 cm,θcold=0∘C,kSt=0.12,LSt=12 cm.\begin{aligned} k_{\text{Cu}} &= 0.92, & L_{\text{Cu}} &= 46\ \text{cm}, & \theta_{\text{hot}} &= 100^\circ\text{C},\\[2mm] k_{\text{Br}} &= 0.26, & L_{\text{Br}} &= 13\ \text{cm}, & \theta_{\text{cold}} &= 0^\circ\text{C},\\[2mm] k_{\text{St}} &= 0.12, & L_{\text{St}} &= 12\ \text{cm}. & \end{aligned}

Let the common junction temperature be T∘CT^\circ\text{C}. Because the system is insulated elsewhere and has reached steady state,

(heat entering through copper)  =  (heat leaving through brass)  +  (heat leaving through steel).\text{(heat entering through copper)}\;=\;\text{(heat leaving through brass)}\;+\;\text{(heat leaving through steel)}.

First we calculate the thermal conductance of each rod, G=kALG = \dfrac{kA}{L}.

For copper:

GCu  =  0.92×446  =  3.6846  =  0.08 (cal/s)/∘C.G_{\text{Cu}} \;=\; \dfrac{0.92 \times 4}{46} \;=\; \dfrac{3.68}{46} \;=\; 0.08\ \text{(cal/s)}/^\circ\text{C}.

For brass:

GBr  =  0.26×413  =  1.0413  =  0.08 (cal/s)/∘C.G_{\text{Br}} \;=\; \dfrac{0.26 \times 4}{13} \;=\; \dfrac{1.04}{13} \;=\; 0.08\ \text{(cal/s)}/^\circ\text{C}.

For steel:

GSt  =  0.12×412  =  0.4812  =  0.04 (cal/s)/∘C.G_{\text{St}} \;=\; \dfrac{0.12 \times 4}{12} \;=\; \dfrac{0.48}{12} \;=\; 0.04\ \text{(cal/s)}/^\circ\text{C}.

Now we write the heat-balance equation:

GCu (100−T)  =  GBr T  +  GSt T.G_{\text{Cu}}\,(100 - T) \;=\; G_{\text{Br}}\,T \;+\; G_{\text{St}}\,T.

Substituting the conductances,

0.08 (100−T)  =  0.08 T  +  0.04 T.0.08\,(100 - T) \;=\; 0.08\,T \;+\; 0.04\,T.

Combining the terms on the right:

0.08 (100−T)  =  0.12 T.0.08\,(100 - T) \;=\; 0.12\,T.

Expanding the left side:

8  −  0.08 T  =  0.12 T.8 \;-\; 0.08\,T \;=\; 0.12\,T.

Bringing like terms together:

8  =  0.12 T+0.08 T  =  0.20 T.8 \;=\; 0.12\,T + 0.08\,T \;=\; 0.20\,T.

Hence

T  =  80.20  =  40∘C.T \;=\; \dfrac{8}{0.20} \;=\; 40^\circ\text{C}.

We now find the required heat current through the copper rod:

QCu  =  GCu (100−T)  =  0.08 (100−40)  =  0.08×60  =  4.8 cal s−1.Q_{\text{Cu}} \;=\; G_{\text{Cu}}\,(100 - T) \;=\; 0.08\,(100 - 40) \;=\; 0.08 \times 60 \;=\; 4.8\ \text{cal}\,\text{s}^{-1}.

Hence, the correct answer is Option C.

Tagged Heat conduction and thermal resistance. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicHeat conduction and thermal resistance
TypeMultiple choice