RankRizz
JEE MAIN 2012TRANSCRIBED

JEE Main 2012 Physics question — Heat conduction and thermal resistance

A large cylindrical rod of length LL is made by joining two identical rods of copper and steel of length (L2)\left(\frac{L}{2}\right) each. The rods are completely insulated from the surroundings. If the free end of copper rod is maintained at 100∘C100^\circ C and that of steel at 0∘C0^\circ C then the temperature of junction is (Thermal conductivity of copper is 99 times that of steel)

SOLUTION

Solution & Explanation

1. Understand the Setup and Heat Flow Rate

Since the two identical rods (copper and steel) are joined end-to-end and completely insulated from the surroundings, the heat transfer takes place under a steady-state condition. This implies that the rate of heat flow (HH) through the copper rod must be exactly equal to the rate of heat flow through the steel rod:

Hcopper=HsteelH_{\text{copper}} = H_{\text{steel}}


2. Apply the Formula for Thermal Conduction

The rate of heat conduction is given by Fourier's law:

H=KA(ΔT)lH = \frac{KA(\Delta T)}{l}

Where:

  • KK = Thermal conductivity of the material
  • AA = Cross-sectional area (identical for both rods)
  • ll = Length of each rod (L2\frac{L}{2}, which is identical for both rods)
  • ΔT\Delta T = Temperature difference across the individual rod

Let θ\theta be the temperature at the junction. We are given:

  • Free end of copper temperature = 100∘C100^\circ\text{C}
  • Free end of steel temperature = 0∘C0^\circ\text{C}
  • Thermal conductivity relationship: Kcopper=9KsteelK_{\text{copper}} = 9K_{\text{steel}}

3. Equate Heat Flows and Solve for θ\theta

Equating the heat flow rates for both segments:

Kcopper⋅A⋅(100−θ)l=Ksteel⋅A⋅(θ−0)l\frac{K_{\text{copper}} \cdot A \cdot (100 - \theta)}{l} = \frac{K_{\text{steel}} \cdot A \cdot (\theta - 0)}{l}

Since the physical dimensions AA and ll are identical, they cancel out from both sides:

Kcopper(100−θ)=Ksteel(θ)K_{\text{copper}}(100 - \theta) = K_{\text{steel}}(\theta)

Substitute Kcopper=9KsteelK_{\text{copper}} = 9K_{\text{steel}} into the simplified equation:

9Ksteel(100−θ)=Ksteel(θ)9K_{\text{steel}}(100 - \theta) = K_{\text{steel}}(\theta)

Divide both sides by KsteelK_{\text{steel}}:

9(100−θ)=θ9(100 - \theta) = \theta

900−9θ=θ900 - 9\theta = \theta

10θ=900  ⟹  θ=90∘C10\theta = 900 \implies \theta = 90^\circ\text{C}

Concept Check: Because copper has a much higher thermal conductivity than steel (99 times higher), it requires a significantly smaller temperature drop (10∘C10^\circ\text{C}) to transfer the exact same amount of heat that steel transfers over a much larger temperature drop (90∘C90^\circ\text{C}).


Correct Option Key: Option A (90∘C90^\circ\text{C})

Tagged Heat conduction and thermal resistance. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicHeat conduction and thermal resistance
TypeMultiple choice