RankRizz
JEE MAIN 2019 · 12 APR S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2019 Physics question — Change of state and latent heat

1 kg of water, at 20°C is heated in an electric kettle whose heating element has a mean (temperature averaged) resistance of 20 Ω. The rms voltage in the mains is 200 V. Ignoring heat loss from the kettle, time taken for water to evaporate fully is close to
[Specific heat of water = 4200 J kg−1^{-1} °C−1^{-1} Latent heat of water = 2260 kJ kg−1^{-1}]

SOLUTION

We have m=1 kgm = 1\ \text{kg} of water whose initial temperature is 20∘C20^\circ\text{C}. To evaporate it completely, two distinct amounts of heat are required:

1. Heat to raise the temperature from 20∘C20^\circ\text{C} to the boiling point 100∘C100^\circ\text{C}.
2. Heat to convert the water at 100∘C100^\circ\text{C} into steam at the same temperature (latent heat of vaporisation).

First, we evaluate the sensible heat needed for the temperature rise. We state the formula for heat absorbed when there is a temperature change:

Q1=mcΔTQ_1 = mc\Delta T

Here c=4200 J kg−1∘C−1c = 4200\ \text{J kg}^{-1}{}^\circ\text{C}^{-1} and ΔT=100∘C−20∘C=80∘C\Delta T = 100^\circ\text{C} - 20^\circ\text{C} = 80^\circ\text{C}. Substituting the values,

Q1=(1 kg)(4200 J kg−1∘C−1)(80∘C)Q_1 = (1\ \text{kg})(4200\ \text{J kg}^{-1}{}^\circ\text{C}^{-1})(80^\circ\text{C})

Q1=4200×80 JQ_1 = 4200 \times 80\ \text{J}

Q1=336000 JQ_1 = 336000\ \text{J}

Next, we compute the latent heat required for the phase change. The latent heat of vaporisation is given as L=2260 kJ kg−1=2260×103 J kg−1L = 2260\ \text{kJ kg}^{-1} = 2260 \times 10^{3}\ \text{J kg}^{-1}. The formula for the heat of phase change is

Q2=mLQ_2 = mL

For m=1 kgm = 1\ \text{kg},

Q2=1×2260×103 JQ_2 = 1 \times 2260 \times 10^{3}\ \text{J}

Q2=2260000 JQ_2 = 2260000\ \text{J}

The total heat required is the sum of these two quantities:

Qtotal=Q1+Q2Q_{\text{total}} = Q_1 + Q_2

Qtotal=336000 J+2260000 JQ_{\text{total}} = 336000\ \text{J} + 2260000\ \text{J}

Qtotal=2596000 JQ_{\text{total}} = 2596000\ \text{J}

Now we determine the rate at which the electric kettle can supply energy. The kettle is connected to a mains supply of rms voltage Vrms=200 VV_{\text{rms}} = 200\ \text{V}, and the heating element has an average resistance R=20 ΩR = 20\ \Omega. We recall Joule’s law for electrical power:

P=Vrms2RP = \dfrac{V_{\text{rms}}^{2}}{R}

Substituting the given values,

P=(200 V)220 ΩP = \dfrac{(200\ \text{V})^{2}}{20\ \Omega}

P=40000 V220 ΩP = \dfrac{40000\ \text{V}^2}{20\ \Omega}

P=2000 WP = 2000\ \text{W}

So the kettle delivers 2000 J s−12000\ \text{J s}^{-1} of energy. The time required to supply the total heat is obtained from

t=QtotalPt = \dfrac{Q_{\text{total}}}{P}

t=2596000 J2000 J s−1t = \dfrac{2596000\ \text{J}}{2000\ \text{J s}^{-1}}

t=1298 st = 1298\ \text{s}

We convert this time into minutes for easier comprehension:

t=1298 s60 s min−1t = \dfrac{1298\ \text{s}}{60\ \text{s min}^{-1}}

t≈21.6 mint \approx 21.6\ \text{min}

This value is closest to the option stating 22 min22\ \text{min}.

Hence, the correct answer is Option C.

Tagged Change of state and latent heat. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicChange of state and latent heat
TypeMultiple choice