RankRizz
JEE MAIN 2015 · 11 APR ONLINE+4 / −1EASYTRANSCRIBED

JEE Main 2015 Physics question — Change of state and latent heat

An experiment takes 10 min to raise the temperature of water in a container from 0∘^\circC to 100∘^\circC and another 55 min to convert it totally into steam by a heater supplying heat at a uniform rate. Neglecting the specific heat of the container and taking specific heat of the water to be 1 cal (g∘^\circC)−1^{-1}, the heat of vaporization according to this experiment will come out to be:

SOLUTION

Let the mass of water present in the container be mm grams. The heater supplies heat at a perfectly uniform rate, so the amount of heat given to the water is proportional to the time for which the heater operates.

First, the water is heated from 0∘C0^\circ{\rm C} to 100∘C100^\circ{\rm C}. We use the basic formula for heat absorbed during a temperature change:

Q=mcΔT,Q = mc\Delta T,

where QQ is the heat absorbed, mm is the mass, cc is the specific heat capacity and ΔT\Delta T is the rise in temperature. Here, c=1  cal (g∘C)−1c = 1\;{\rm cal}\,( {\rm g}^\circ{\rm C} )^{-1} and ΔT=100∘C−0∘C=100∘C\Delta T = 100^\circ{\rm C} - 0^\circ{\rm C} = 100^\circ{\rm C}. Hence the heat needed for this stage is

Q1=m×1×100=100m  cal.Q_1 = m \times 1 \times 100 = 100m\;{\rm cal}.

This stage takes 10 minutes. Because the heater’s power is constant, the heat supplied per minute is the same throughout the whole experiment. Denote this unknown constant rate by PP (cal per minute). Then, for the first stage,

Q1=P×(time for stage 1)=P×10.Q_1 = P \times (\text{time for stage 1}) = P \times 10.

Equating the two expressions for Q1Q_1 gives us

P×10=100m→P=100m10=10m  cal  min−1.P \times 10 = 100m \quad\rightarrow\quad P = \frac{100m}{10} = 10m\;{\rm cal\;min^{-1}}.

Next, the entire mass of water at 100∘C100^\circ{\rm C} is converted into steam at the same temperature. The heat required for a complete change of state is the latent heat:

Q2=mL,Q_2 = mL,

where LL is the heat of vaporization per gram, which we wish to find. The time taken for this stage is 55 minutes, so by the same constant-power reasoning,

Q2=P×(time for stage 2)=P×55.Q_2 = P \times (\text{time for stage 2}) = P \times 55.

Substituting the value of PP obtained earlier,

mL=(10m)×55.mL = (10m)\times 55.

Now we divide both sides by mm to eliminate the mass (since it is the same in both stages and non-zero):

L=10×55=550  cal g−1.L = 10 \times 55 = 550\;{\rm cal\,g^{-1}}.

Hence, the measured heat of vaporization from this experiment is 550  cal g−1550\;{\rm cal\,g^{-1}}.

Hence, the correct answer is Option B.

Tagged Change of state and latent heat. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicChange of state and latent heat
TypeMultiple choice