RankRizz
JEE MAIN 2020 · 05 SEP S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2020 Physics question — Zener diode, LED, photodiode and solar cell

Two Zener diodes (AA and BB) having breakdown voltages of 6 V6\,\text{V} and 4 V4\,\text{V} respectively, are connected as shown in the circuit below. The output voltage V0V_0 variation with input voltage linearly increasing with time, is given by (Vinput=0VV_{input} = 0V at t=0t = 0):

Figure for JEE Main 2020 Physics question on Zener diode, LED, photodiode and solar cell
SOLUTION

A Zener diode in reverse breakdown maintains a fixed voltage across its terminals, acting as a constant voltage drop in series with any accompanying branch resistors.

For Vin<4 VV_{\text{in}} < 4\text{ V}:

Both Zener diodes AA and BB remain in the off-state (no breakdown). The output voltage tracks the input source directly:  Vo=VinV_o = V_{\text{in}}

For 4 V≤Vin<6 V4\text{ V} \le V_{\text{in}} < 6\text{ V}:

Zener diode BB enters its breakdown region, conducting current through its branch and dropping a fixed 4 V4\text{ V}. Because the branch introduces an additional load resistance of 100 Ω100\ \Omega in parallel with RLR_L, it alters the overall circuit impedance. The output voltage continues to rise linearly with time, but with a reduced slope.

For Vin≥6 VV_{\text{in}} \ge 6\text{ V}:

Zener diode AA reaches its breakdown threshold. Since it is connected directly across the main output rails without any series branch resistance, it successfully clamps the output to a constant maximum value: Vo=6 VV_o = 6\text{ V}

Tagged Zener diode, LED, photodiode and solar cell. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicZener diode, LED, photodiode and solar cell
TypeMultiple choice