RankRizz
JEE MAIN 2021 · 31 AUG S1+4 / −1EASYTRANSCRIBED

JEE Main 2021 Physics question — p-n junction diode and its characteristics

Choose the correct waveform that can represent the voltage across RR of the following circuit, assuming the diode is ideal one:

Figure for JEE Main 2021 Physics question on p-n junction diode and its characteristics
SOLUTION

1. Circuit Parameters

  • Input Voltage: vi=10sin⁡(ωt)v_i = 10 \sin(\omega t)
  • Diode (DD): Ideal, pointing to the right (forward-biased when Anode potential VA>V_A > Cathode potential VKV_K).
  • DC Battery Reference: +3 V+3\text{ V} (positive terminal facing upward toward the resistor).

2. Operational States of the Circuit

Case A: When vi>3 Vv_i > 3\text{ V} (Diode is ON)

When the input signal rises above the reference battery voltage (+3 V+3\text{ V}), the diode becomes forward-biased and acts as a short circuit (closed switch).

Applying Kirchhoff's Voltage Law (KVL) around the conducting loop:

vi−VR−3=0  ⟹  VR=vi−3v_i - V_R - 3 = 0 \implies V_R = v_i - 3

  • The waveform across the resistor tracks the input voltage but is shifted down by 3 V3\text{ V}.
  • At the positive peak (vi=+10 Vv_i = +10\text{ V}), the output voltage reaches maximum:

    VR=10−3=+7 VV_R = 10 - 3 = +7\text{ V}

Case B: When vi≤3 Vv_i \le 3\text{ V} (Diode is OFF)

When the input voltage drops below or equals the reference battery level (≤+3 V\le +3\text{ V}), the diode is reverse-biased and acts as an open circuit (open switch).

  • With the loop broken, zero current flows through the circuit (I=0I = 0).
  • Therefore, the output voltage across the resistor drops flat to baseline:

    VR=0 VV_R = 0\text{ V}


3. Waveform Identification

The resulting voltage waveform across the load resistor (VRV_R) must satisfy two visual rules:

  1. It stays perfectly flat at **0 V0\text{ V}** for any input voltage value below +3 V+3\text{ V} (clipping the entire negative half-cycle and parts of the positive half-cycle).
  2. It projects a smooth sinusoidal peak reaching up to **+7 V+7\text{ V}** only when the input waveform crosses above the +3 V+3\text{ V} reference threshold.

This exact profile—clipping flat at 0 V0\text{ V} and tracking only the upper peak relative to the shifted reference axis—corresponds to the first choice on the page layout.


Correct Option: A

Tagged p-n junction diode and its characteristics. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
Topicp-n junction diode and its characteristics
TypeMultiple choice