RankRizz
JEE MAIN 2022 · 28 JUN S1+4 / −1EASYTRANSCRIBED

JEE Main 2022 Physics question — Logic gates and digital circuits

In the following circuit, the correct relation between output (YY) and inputs AA and BB will be

Figure for JEE Main 2022 Physics question on Logic gates and digital circuits
SOLUTION

To determine the logic operation of the given circuit, we analyze the behavior of the diodes and the NPN transistor for different input combinations:

1. Analysis of the Diode Section (Inputs A and B)

The first part of the circuit (diodes D1D_1 and D2D_2 connected to a −10 V-10\text{ V} source through resistor R) acts as an AND gate logic for the point X:

  • If either A or B is Low (0 V0\text{ V}): The corresponding diode becomes forward-biased by the −10 V-10\text{ V} supply. Point X remains at a low potential.
  • If both A and B are High (5 V5\text{ V}): Both diodes are reverse-biased. Point X rises to a high potential.

2. Analysis of the Transistor Section (Output Y)

The NPN transistor acts as a NOT gate (inverter):

  • When X is Low: The transistor is in cutoff. No current flows through RCR_C, so the output Y is pulled up to 5 V5\text{ V} (High).
  • When X is High: The transistor goes into saturation. Point Y is shorted to ground, making the output (Low).

3. Truth Table

Input AInput BPoint X (A ⋅ B)Output Y (X)
0001
1001
0101
1110

Conclusion

The output Y is the inverse of the AND operation of the inputs. This corresponds to a NAND gate.

Correct Relation:

Y=AB‾\boxed{Y = \overline{AB}}

Correct Option: (C)

Tagged Logic gates and digital circuits. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicLogic gates and digital circuits
TypeMultiple choice