RankRizz
JEE MAIN 2021 · 20 JUL S2+4EASYTRANSCRIBED

JEE Main 2021 Physics question — Zener diode, LED, photodiode and solar cell

A zener diode having zener voltage 8 V and power dissipation rating of 0.5 W is connected across a potential divider arranged with maximum potential drop across zener diode as shown in the diagram. The value of protective resistance RpR_p is ___ Ω\Omega.

Figure for JEE Main 2021 Physics question on Zener diode, LED, photodiode and solar cell
SOLUTION

We need to determine the value of the protective resistance RpR_p connected in series with a Zener diode under the maximum potential drop arrangement.

1. Extract Given Parameters from the Problem

  • Zener Voltage (VzV_z): 8 V8\text{ V}
  • Maximum Power Dissipation Rating (PmaxP_{\text{max}}): 0.5 W0.5\text{ W}
  • Total Supply Voltage (VsV_s): 20 V20\text{ V}

2. Find the Maximum Safe Zener Current (Iz,maxI_{z\text{,max}})

The maximum power dissipation inside a Zener diode occurs when it carries its peak breakdown current while maintaining its rated Zener voltage. The relation is expressed as:

Pmax=Vz×Iz,maxP_{\text{max}} = V_z \times I_{z\text{,max}}

Isolating the maximum current (Iz,maxI_{z\text{,max}}):

Iz,max=PmaxVz=0.5 W8 V=116 A=0.0625 AI_{z\text{,max}} = \frac{P_{\text{max}}}{V_z} = \frac{0.5\text{ W}}{8\text{ V}} = \frac{1}{16}\text{ A} = 0.0625\text{ A}


3. Determine the Voltage Across the Protective Resistor (VRpV_{Rp})

When the potential divider is set such that the maximum potential drop is applied across the Zener system, the Zener diode operates in its breakdown region, fixing the voltage across itself and any parallel load at exactly Vz=8 VV_z = 8\text{ V}.

By applying Kirchhoff's Voltage Law (KVL) around the main input loop, the voltage drop across the series protective resistance (RpR_p) is the remaining portion of the supply voltage:

VRp=Vs−VzV_{Rp} = V_s - V_z

VRp=20 V−8 V=12 VV_{Rp} = 20\text{ V} - 8\text{ V} = 12\text{ V}


4. Calculate the Value of Protective Resistance (RpR_p)

To ensure the Zener diode is safely protected and does not burn out under maximum potential conditions, the series resistor must limit the loop current to exactly the maximum safe Zener current (Iz,maxI_{z\text{,max}}). Using Ohm's law:

Rp=VRpIz,maxR_p = \frac{V_{Rp}}{I_{z\text{,max}}}

Substituting the values calculated above:

Rp=12 V(116 A)=12×16=192 ΩR_p = \frac{12\text{ V}}{\left(\frac{1}{16}\text{ A}\right)} = 12 \times 16 = 192\ \Omega


Final Answer: 192192

Tagged Zener diode, LED, photodiode and solar cell. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicZener diode, LED, photodiode and solar cell
TypeNumerical answer