RankRizz
JEE MAIN 2020 · 09 JAN S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2020 Physics question — Elastic potential energy in stretched wires

Two steel wires having same length are suspended from a ceiling under the same load. If the ratio of their energy stored per unit volume is 1 : 4, the ratio of their diameters is:

SOLUTION

We begin with the expression for the elastic (strain) energy stored per unit volume in a stretched wire. For a material that obeys Hooke’s law the strain energy density is

u  =  12 σ εu \;=\; \frac12\,\sigma\,\varepsilon

where σ\sigma is the normal stress and ε\varepsilon is the linear strain. Because strain for an elastic material is related to stress through Young’s modulus EE by ε=σE\varepsilon = \dfrac{\sigma}{E}, we can substitute and obtain

u  =  12 σ(σE)  =  σ22E.u \;=\; \frac12\,\sigma \left(\frac{\sigma}{E}\right) \;=\; \frac{\sigma^{2}}{2E}.

Both wires are made of steel, so the Young’s modulus EE is the same for each. Hence, for comparison of the two wires, the factor 12E\dfrac{1}{2E} is common and the energy density is directly proportional to the square of the stress:

u  ∝  σ2.u \;\propto\; \sigma^{2}.

Each wire carries the same load FF, but because their diameters are different, their cross-sectional areas differ. For a circular cross-section of diameter dd, the area is

A  =  πd24.A \;=\; \frac{\pi d^{2}}{4}.

Stress is force divided by area, so

σ  =  FA  =  Fπd2/4  =  4Fπd2.\sigma \;=\; \frac{F}{A} \;=\; \frac{F}{\pi d^{2}/4} \;=\; \frac{4F}{\pi d^{2}}.

This shows that

σ  ∝  1d2.\sigma \;\propto\; \frac{1}{d^{2}}.

Substituting this proportionality into the proportionality for energy density, we get

u  ∝  σ2  ∝  (1d2)2  =  1d4.u \;\propto\; \sigma^{2} \;\propto\; \left(\frac{1}{d^{2}}\right)^{2} \;=\; \frac{1}{d^{4}}.

Therefore, for two wires (1) and (2) with diameters d1d_{1} and d2d_{2}, the ratio of their strain energies per unit volume is

u1u2  =  1/d141/d24  =  d24d14.\frac{u_{1}}{u_{2}} \;=\; \frac{1/d_{1}^{4}}{1/d_{2}^{4}} \;=\; \frac{d_{2}^{4}}{d_{1}^{4}}.

The problem states that this ratio is 1:41:4, i.e.

u1u2  =  14.\frac{u_{1}}{u_{2}} \;=\; \frac{1}{4}.

Equating the two expressions, we have

d24d14  =  14.\frac{d_{2}^{4}}{d_{1}^{4}} \;=\; \frac{1}{4}.

Cross-multiplying gives

4d24  =  d14.4d_{2}^{4} \;=\; d_{1}^{4}.

Taking the fourth root of both sides,

d1  =  2 d2.d_{1} \;=\; \sqrt{2}\,d_{2}.

Thus the ratio of the diameters is

d1:d2  =  2:1.d_{1}:d_{2} \;=\; \sqrt{2}:1.

Hence, the correct answer is Option A.

Tagged Elastic potential energy in stretched wires. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicElastic potential energy in stretched wires
TypeMultiple choice