RankRizz
JEE MAIN 2019 · 09 JAN S1+4 / −1EASYTRANSCRIBED

JEE Main 2019 Physics question — Thermal stress

A rod, of length LL at room temperature and uniform area of cross section AA, is made of a metal having coefficient of linear expansion α\alpha /∘^{\circ}C. It is observed that an external compressive force FF is applied on each of its ends, prevents any change in the length of the rod when its temperature rises by ΔT\Delta T K. Young's modulus, YY for this metal is:

SOLUTION

We begin by recalling that when the temperature of a free rod rises by ΔT\Delta T, its natural tendency is to increase its length. The linear thermal expansion formula is first stated:

ΔLthermal=αLΔT,\Delta L_{\text{thermal}} = \alpha L \Delta T,

where α\alpha is the coefficient of linear expansion, LL is the original length and ΔT\Delta T is the rise in temperature.

This change of length produces a thermal strain (fractional change in length) given by

εthermal=ΔLthermalL=αΔT.\varepsilon_{\text{thermal}} = \frac{\Delta L_{\text{thermal}}}{L} = \alpha \Delta T.

In the problem, however, a compressive force FF is applied at both ends so that the rod is not allowed to change its length at all. Therefore, the total strain in the rod must be zero:

εtotal=εthermal+εmechanical=0.\varepsilon_{\text{total}} = \varepsilon_{\text{thermal}} + \varepsilon_{\text{mechanical}} = 0.

We have already written εthermal=αΔT.\varepsilon_{\text{thermal}} = \alpha \Delta T. Next, we write the mechanical strain caused by the external compressive force. Young’s modulus YY is defined by the relation

Y=stressstrain⟹strain=stressY.Y = \frac{\text{stress}}{\text{strain}} \quad \Longrightarrow \quad \text{strain} = \frac{\text{stress}}{Y}.

The compressive stress produced by the force FF over the cross-sectional area AA is

σ=FA.\sigma = \frac{F}{A}.

Because the force is compressive, the corresponding mechanical strain is also compressive (negative):

εmechanical=−σY=−FA Y.\varepsilon_{\text{mechanical}} = -\frac{\sigma}{Y} = -\frac{F}{A\,Y}.

Now we impose the condition that the rod’s length does not change, i.e. εtotal=0\varepsilon_{\text{total}} = 0. Substituting the expressions for the two strains, we get

αΔT  +  (−FA Y)=0.\alpha \Delta T \;+\; \left(-\frac{F}{A\,Y}\right) = 0.

Simplifying,

αΔT=FA Y.\alpha \Delta T = \frac{F}{A\,Y}.

We now solve for Young’s modulus YY by cross-multiplying:

Y=FA α ΔT.Y = \frac{F}{A\,\alpha \,\Delta T}.

This expression matches Option C in the given list.

Hence, the correct answer is Option C.

Tagged Thermal stress. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicThermal stress
TypeMultiple choice