RankRizz
JEE MAIN 2013 · 09 APR ONLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2013 Physics question — Stress, strain, Hooke's law and Young's modulus

If the ratio of lengths, radii and Young's moduli of steel and brass wires in the figure are a, b and c respectively, then the corresponding ratio of increase in their lengths is :

Figure for JEE Main 2013 Physics question on Stress, strain, Hooke's law and Young's modulus
SOLUTION

Tension in Brass wire (FbF_b): It supports only the bottom mass 2M2M, hence, Fb=2MgF_b = 2Mg
Tension in Steel wire (FsF_s): It supports both masses MM and 2M2M, hence, Fs=Mg+2Mg=3MgF_s = Mg + 2Mg = 3Mg

FsFb=3Mg2Mg=32\frac{F_s}{F_b} = \frac{3Mg}{2Mg} = \frac{3}{2}

ΔL=FLAY=FLπr2Y\Delta L = \frac{FL}{AY} = \frac{FL}{\pi r^2 Y}

ΔLsΔLb=(FsFb)×(LsLb)×(rbrs)2×(YbYs)\frac{\Delta L_s}{\Delta L_b} = \left( \frac{F_s}{F_b} \right) \times \left( \frac{L_s}{L_b} \right) \times \left( \frac{r_b}{r_s} \right)^2 \times \left( \frac{Y_b}{Y_s} \right)

ΔLsΔLb=(32)×(a)×(1b)2×(1c)\frac{\Delta L_s}{\Delta L_b} = \left( \frac{3}{2} \right) \times (a) \times \left( \frac{1}{b} \right)^2 \times \left( \frac{1}{c} \right)

ΔLsΔLb=3a2b2c\frac{\Delta L_s}{\Delta L_b} = \frac{3a}{2b^2c}

Tagged Stress, strain, Hooke's law and Young's modulus. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicStress, strain, Hooke's law and Young's modulus
TypeMultiple choice