RankRizz
JEE MAIN 2017 · 08 APR ONLINE+4 / −1EASYTRANSCRIBED

JEE Main 2017 Physics question — Thermal stress

A compressive force, FF is applied at the two ends of a long thin steel rod. It is heated, simultaneously, such that its temperature increases by ΔT\Delta T. The net change in its length is zero. Let ll be the length of the rod, AA its area of cross-section, YY its Young's modulus, and α\alpha its coefficient of linear expansion. Then, FF is equal to:

SOLUTION

We are told that a long, thin steel rod of initial length ll and cross-sectional area AA is subjected simultaneously to two different actions. One action is purely mechanical: a compressive force FF is applied axially at its ends. The other action is purely thermal: the rod is heated so that its temperature rises by ΔT\Delta T. Experimentally, we observe that the combined effect of these two actions leaves the overall length of the rod unchanged. Mathematically, this means that the total, or net, linear strain is zero.

We first recall the definition of linear strain. Whenever a body undergoes a fractional change in length, that fraction is called the strain: strain=Δll.\text{strain} = \dfrac{\Delta l}{l}. If two kinds of strain act simultaneously, we simply add them (with the proper algebraic signs) to get the net strain.

We therefore identify the two individual strains acting on the rod:

1. Thermal strain due to heating. The coefficient of linear expansion of the material is α\alpha. By definition, the fractional change in length produced solely by a temperature rise ΔT\Delta T is

thermal strain  =  α ΔT.\text{thermal strain} \;=\; \alpha \,\Delta T.

This strain is positive because heating tends to elongate the rod.

2. Mechanical strain due to the compressive force. We start with the relation between stress, strain and Young’s modulus. Young’s modulus YY of a material is defined by the formula

Y  =  stressstrain.Y \;=\; \dfrac{\text{stress}}{\text{strain}}.

Here the axial stress caused by the applied force FF is simply the force divided by the area of cross-section:

stress  =  FA.\text{stress} \;=\; \dfrac{F}{A}.

Substituting this stress into the defining equation of Young’s modulus, we get the mechanical strain:

strainmech  =  stressY  =  F/AY  =  FA Y.\text{strain}_{\text{mech}} \;=\; \dfrac{\text{stress}}{Y} \;=\; \dfrac{F/A}{Y} \;=\; \dfrac{F}{A\,Y}.

Because the applied force is compressive, it attempts to shorten the rod. Hence this mechanical strain is negative with respect to the original length. To indicate the sign explicitly, we may write it as −FA Y.-\dfrac{F}{A\,Y}.

Adding the two strains and imposing the zero-net-strain condition. The net strain is the algebraic sum of the thermal strain and the mechanical strain. Setting their sum to zero gives

thermal strain  +  mechanical strain  =  0,\text{thermal strain} \;+\; \text{mechanical strain} \;=\; 0,

α ΔT  −  FA Y  =  0.\alpha \,\Delta T \;-\; \dfrac{F}{A\,Y} \;=\; 0.

Now we solve this equation step by step for the unknown force FF. First, move the mechanical-strain term to the right-hand side:

α ΔT  =  FA Y.\alpha \,\Delta T \;=\; \dfrac{F}{A\,Y}.

Next, multiply both sides by A YA\,Y to isolate FF:

F  =  A Y α ΔT.F \;=\; A\,Y \, \alpha \,\Delta T.

Thus the compressive force necessary to counteract the expansion produced by the temperature rise and leave the rod’s length unchanged is

F  =  AYαΔT.F \;=\; A Y \alpha \Delta T.

We compare this result with the given options. It matches Option B.

Hence, the correct answer is Option B.

Tagged Thermal stress. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicThermal stress
TypeMultiple choice