RankRizz
JEE MAIN 2014 · 06 APR OFFLINE+4 / −1EASYTRANSCRIBED

JEE Main 2014 Physics question — Thermal stress

The pressure that has to be applied to the ends of a steel wire of length 10 cm to keep its length constant when its temperature is raised by 100 °C is: (For steel, Young's modulus is 2×10112 \times 10^{11} N m−2^{-2} and coefficient of thermal expansion is 1.1×10−51.1 \times 10^{-5} K−1^{-1})

SOLUTION

We are told that a steel wire is heated through a temperature rise of ΔT=100  ∘C\Delta T = 100\;^{\circ}\mathrm{C}, but its length must remain unchanged. Normally, heating would make the wire expand. The thermal (free) linear strain that tries to develop is given by the well-known relation

Thermal strain=α ΔT,\text{Thermal strain} = \alpha \,\Delta T,

where α\alpha is the coefficient of linear thermal expansion. For steel we have α=1.1×10−5  K−1\alpha = 1.1 \times 10^{-5}\;\mathrm{K^{-1}}. Substituting the given temperature rise, the thermal strain would be

α ΔT=(1.1×10−5)×100=1.1×10−3.\alpha \,\Delta T = \left(1.1 \times 10^{-5}\right)\times 100 = 1.1 \times 10^{-3}.

To keep the length actually constant, an equal and opposite mechanical (compressive) strain must be produced. According to Hooke’s law for a linear elastic solid, the mechanical strain produced by an applied stress σ\sigma is

Mechanical strain=σY,\text{Mechanical strain} = \frac{\sigma}{Y},

where Y=2×1011  N m−2Y = 2 \times 10^{11}\;\mathrm{N\,m^{-2}} is Young’s modulus for steel. Setting the mechanical strain equal in magnitude to the unwanted thermal strain, we write

σY=α ΔT.\frac{\sigma}{Y} = \alpha \,\Delta T.

Solving for the required stress σ\sigma (which will be equal to the necessary external pressure PP because stress and pressure have the same dimensions), we obtain

σ=Y α ΔT.\sigma = Y \, \alpha \,\Delta T.

Now we substitute all the numerical values step by step:

σ=(2×1011  N m−2)(1.1×10−5)(100).\sigma = \left(2 \times 10^{11}\;\mathrm{N\,m^{-2}}\right) \left(1.1 \times 10^{-5}\right) \left(100\right).

First multiply the powers of ten:

1011×10−5×100=1011×10−5×102=1011×10−3=108.10^{11}\times 10^{-5}\times 100 = 10^{11}\times 10^{-5}\times 10^{2} = 10^{11}\times 10^{-3} = 10^{8}.

Next multiply the numerical coefficients:

2×1.1=2.2.2 \times 1.1 = 2.2.

Combining these two results, the stress (and therefore the pressure) required is

σ=2.2×108  N m−2=2.2×108  Pa.\sigma = 2.2 \times 10^{8}\;\mathrm{N\,m^{-2}} = 2.2 \times 10^{8}\;\mathrm{Pa}.

This matches exactly the value in Option A.

Hence, the correct answer is Option A.

Tagged Thermal stress. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicThermal stress
TypeMultiple choice