RankRizz
JEE MAIN 2021 · 27 JUL S1+4MEDIUMTRANSCRIBED

JEE Main 2021 Physics question — Elastic potential energy in stretched wires

A stone of mass 20 g is projected from a rubber catapult of length 0.1 m and area of cross section 10−610^{-6} m2^2 stretched by an amount 0.04 m. The velocity of the projected stone is _________ m s−1^{-1}. (Young's modulus of rubber = 0.5×1090.5 \times 10^9 N m−2^{-2})

SOLUTION

We are given a stone of mass m=20 gm = 20\ \text{g}. First we convert this mass into SI units, because all our formulae use kilograms:

m=20 g=20×10−3 kg=0.02 kg.m = 20\ \text{g} = 20 \times 10^{-3}\ \text{kg} = 0.02\ \text{kg}.

The rubber catapult has an original (unstretched) length L=0.1 m,L = 0.1\ \text{m}, a cross-sectional area A=10−6 m2,A = 10^{-6}\ \text{m}^2, and it is stretched by an amount x=0.04 m.x = 0.04\ \text{m}. We are also supplied the Young’s modulus of the rubber,

Y=0.5×109 N m−2.Y = 0.5 \times 10^{9}\ \text{N m}^{-2}.

Young’s modulus connects stress and strain through the relation

Y=StressStrain=F/Ax/L,Y = \dfrac{\text{Stress}}{\text{Strain}} = \dfrac{F/A}{x/L},

where FF is the stretching force produced in the rubber. Rearranging, we obtain the magnitude of this force:

F=Y A xL.F = Y\,A\,\dfrac{x}{L}.

When the catapult is released, the elastic potential energy stored in the stretched rubber is converted into the kinetic energy of the stone. The elastic potential energy stored in a stretched rod is found by integrating the work done, or more directly by the spring-energy-like expression

U=12Fx.U = \dfrac{1}{2} F x.

Substituting the expression for FF that we have just obtained, we write

U=12(YAxL)x=12 Y A x2L.U = \dfrac{1}{2} \left(Y A \dfrac{x}{L}\right) x = \dfrac{1}{2}\,Y\,A\,\dfrac{x^{2}}{L}.

Now we insert the numerical values step by step:

First evaluate the product in the numerator:

Y A=0.5×109 N m−2×10−6 m2=0.5×103 N=500 N.Y \, A = 0.5 \times 10^{9}\ \text{N m}^{-2} \times 10^{-6}\ \text{m}^{2} = 0.5 \times 10^{3}\ \text{N} = 500\ \text{N}.

However, since we will have an extra factor of 12\tfrac{1}{2} outside, let us proceed carefully, keeping all factors explicit:

U=12×(0.5×109)×(10−6)×(0.04)20.1.U = \dfrac{1}{2}\times (0.5 \times 10^{9}) \times (10^{-6}) \times \dfrac{(0.04)^2}{0.1}.

Multiply the first two numerical factors:

12×0.5=0.25,\dfrac{1}{2} \times 0.5 = 0.25,

and combine the powers of ten:

0.25×109×10−6=0.25×103=250.0.25 \times 10^{9} \times 10^{-6} = 0.25 \times 10^{3} = 250.

So the expression becomes

U=250×(0.04)20.1 J.U = 250 \times \dfrac{(0.04)^2}{0.1}\ \text{J}.

Next square the extension:

(0.04)2=0.0016.(0.04)^2 = 0.0016.

Multiply this with 250:

250×0.0016=0.4.250 \times 0.0016 = 0.4.

Finally divide by the original length L=0.1 m:L = 0.1\ \text{m}:

U=0.40.1=4 J.U = \dfrac{0.4}{0.1} = 4\ \text{J}.

This 4 J4\ \text{J} of elastic potential energy becomes the kinetic energy of the stone. By the work-energy principle we therefore set

12mv2=U.\dfrac{1}{2} m v^{2} = U.

Substituting m=0.02 kgm = 0.02\ \text{kg} and U=4 J:U = 4\ \text{J}:

12 (0.02) v2=4.\dfrac{1}{2}\,(0.02)\,v^{2} = 4.

First multiply the left-hand constants:

12×0.02=0.01.\dfrac{1}{2}\times 0.02 = 0.01.

So we have

0.01 v2=4,0.01\,v^{2} = 4,

which gives

v2=40.01=400.v^{2} = \dfrac{4}{0.01} = 400.

Taking the positive square root (since speed is positive) we find

v=400=20 m s−1.v = \sqrt{400} = 20\ \text{m s}^{-1}.

So, the answer is 2020.

Tagged Elastic potential energy in stretched wires. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicElastic potential energy in stretched wires
TypeNumerical answer