RankRizz
JEE MAIN 2013 · 23 APR ONLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2013 Physics question — Stress, strain, Hooke's law and Young's modulus

A copper wire of length 1.0 m and a steel wire of length 0.5 m having equal cross-sectional areas are joined end to end. The composite wire is stretched by a certain load which stretches the copper wire by 1 mm. If the Young's modulii of copper and steel are respectively 1.0×10111.0 \times 10^{11} Nm−2^{-2} and 2.0×10112.0 \times 10^{11} Nm−2^{-2}, the total extension of the composite wire is :

SOLUTION

We have a composite wire made of copper and steel joined end to end. The copper wire is 1.0 m long and the steel wire is 0.5 m long, both with the same cross-sectional area. The composite wire is stretched by a load that causes the copper wire to extend by 1 mm. We need to find the total extension of the composite wire.

Given:

  • Length of copper wire, Lc=1.0mL_c = 1.0 \text{m}
  • Length of steel wire, Ls=0.5mL_s = 0.5 \text{m}
  • Extension of copper wire, ΔLc=1mm=0.001m\Delta L_c = 1 \text{mm} = 0.001 \text{m}
  • Young's modulus of copper, Yc=1.0×1011Nm−2Y_c = 1.0 \times 10^{11} \text{Nm}^{-2}
  • Young's modulus of steel, Ys=2.0×1011Nm−2Y_s = 2.0 \times 10^{11} \text{Nm}^{-2}

Since the wires are joined end to end, the same force FF acts on both wires. The cross-sectional area AA is the same for both.

Using Hooke's law for the copper wire:

Yc=F⋅LcA⋅ΔLcY_c = \frac{F \cdot L_c}{A \cdot \Delta L_c}

Solving for the force FF:

F=Yc⋅A⋅ΔLcLcF = \frac{Y_c \cdot A \cdot \Delta L_c}{L_c}

Substituting the values:

F=(1.0×1011)⋅A⋅(0.001)1.0F = \frac{(1.0 \times 10^{11}) \cdot A \cdot (0.001)}{1.0}

F=(1.0×1011)⋅A⋅0.001F = (1.0 \times 10^{11}) \cdot A \cdot 0.001

F=1.0×1011×10−3⋅AF = 1.0 \times 10^{11} \times 10^{-3} \cdot A

F=1.0×108A NewtonsF = 1.0 \times 10^{8} A \text{ Newtons}

Now, for the steel wire, the same force FF is applied. Using Hooke's law:

Ys=F⋅LsA⋅ΔLsY_s = \frac{F \cdot L_s}{A \cdot \Delta L_s}

Solving for the extension of steel ΔLs\Delta L_s:

ΔLs=F⋅LsA⋅Ys\Delta L_s = \frac{F \cdot L_s}{A \cdot Y_s}

Substituting the values:

ΔLs=(1.0×108A)⋅(0.5)A⋅(2.0×1011)\Delta L_s = \frac{(1.0 \times 10^{8} A) \cdot (0.5)}{A \cdot (2.0 \times 10^{11})}

The AA cancels out:

ΔLs=1.0×108⋅0.52.0×1011\Delta L_s = \frac{1.0 \times 10^{8} \cdot 0.5}{2.0 \times 10^{11}}

ΔLs=5.0×1072.0×1011\Delta L_s = \frac{5.0 \times 10^{7}}{2.0 \times 10^{11}}

ΔLs=5.02.0×107−11\Delta L_s = \frac{5.0}{2.0} \times 10^{7-11}

ΔLs=2.5×10−4m\Delta L_s = 2.5 \times 10^{-4} \text{m}

Converting to millimeters (since 1 m = 1000 mm):

ΔLs=2.5×10−4×1000=0.25mm\Delta L_s = 2.5 \times 10^{-4} \times 1000 = 0.25 \text{mm}

The total extension of the composite wire is the sum of the extensions of the copper and steel parts:

ΔLtotal=ΔLc+ΔLs=1mm+0.25mm=1.25mm\Delta L_{\text{total}} = \Delta L_c + \Delta L_s = 1 \text{mm} + 0.25 \text{mm} = 1.25 \text{mm}

Hence, the correct answer is Option D.

Tagged Stress, strain, Hooke's law and Young's modulus. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicStress, strain, Hooke's law and Young's modulus
TypeMultiple choice