RankRizz
JEE MAIN 2006TRANSCRIBED

JEE Main 2006 Physics question — Stress, strain, Hooke's law and Young's modulus

A wire elongates by ℓ mm\ell\,mm when a load WW is hanged from it. If the wire goes over a pulley and two weights WW each are hung at the two ends, the elongation of the wire will be (in mmmm)

SOLUTION

Case 1: Wire fixed at one support and loaded with WW

Let the original length of the wire be LL, its cross-sectional area be AA, and the Young's modulus of its material be YY

In this setup, the tension TT in the wire is uniform and equal to the applied load WW.

According to Hooke's Law, the initial elongation ℓ\ell is given by:

ℓ=TLAY=WLAY\ell = \frac{T L}{A Y} = \frac{W L}{A Y}

Case 2: Wire over a smooth pulley with weights WW at both ends

T′=WT' = W.

Even though the wire is bent over the pulley, the total length subjected to this tension is still LL. Since the tension T′T' is exactly the same as in Case 1 (T′=WT' = W), the total elongation ΔL\Delta L depends entirely on this same tension acting over the entire length LL:

ΔL=T′LAY=WLAY\Delta L = \frac{T' L}{A Y} = \frac{W L}{A Y}

Comparing this with our equation from Case 1, we clearly see that:

ΔL=ℓ\Delta L = \ell (option B)

Tagged Stress, strain, Hooke's law and Young's modulus. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicStress, strain, Hooke's law and Young's modulus
TypeMultiple choice